Applied multi parameters to pause and unpause.
Created a new test file dedicated for pause commands.
Created a new utility function to get a slice of paused containers.
Updated documentation
Signed-off-by: André Martins <martins@noironetworks.com>
In order to fit printed messages to fit 80 chars,
rewording messages for `-H` and `--tls` flags.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
It didn't work on v2 anyways. And an image with a lot of aliases was slow to
fetch.
Docker-DCO-1.1-Signed-off-by: Jessie Frazelle <princess@docker.com> (github: jfrazelle)
It's ambiguous to say that `ENV` is _functionally equivalent to prefixing the command with `<key>=<value>`_. `ENV` sets the environment for all future commands, but `RUN` can take chained commands like `RUN foo=bar bash -c 'echo $foo' && bash -c 'echo $foo $bar'`. Users with a solid understanding of `exec` may grok this without confusion, but less experienced users may need this distinction.
Signed-off-by: Michael A. Smith <msmith3@ebay.com>
Improve Environment Handling Descriptions
- Link `ENV` and `Environment Replacement`
- Improve side-effects of `ENV` text
- Rearrange avoiding side effects text
Signed-off-by: Michael A. Smith <msmith3@ebay.com>
Reflow change in commit 195f3a3f removed newlines in the config format.
This change reverts the sample config to the original formatting, which
matches the actual config format of a `awsconfig` file.
Signed-off-by: Katie McLaughlin <katie@glasnt.com>
This modifies the "docker help" text so that it is no wider than 80 chars
and each description fits on one line. This will also try to use ~ when
possible
Added a test to make sure we don't go over 80 chars again.
Added a test to make sure we use ~
Applied rules/tests to all docker commands - not just main help text
Closes#10214
Signed-off-by: Doug Davis <dug@us.ibm.com>
The docs around COPY/ADD already mentioned that it will do a relative
copy/add based on WORKDIR, so that part is already ok. Just needed to
tweak the WORKDIR section since w/o mentioning COPY/ADD it can be misleading.
Noticed by @phemmer
Signed-off-by: Doug Davis <dug@us.ibm.com>
See #10141 for more info, but the main point of this is to make sure
that if you do "docker run -e FOO ..." that FOO from the current env
is passed into the container. This means that if there's a value, its
set. But it also means that if FOO isn't set then it should be unset in
the container too - even if it has to remove it from the env. So,
unset HOSTNAME
docker run -e HOSTNAME busybox env
should _NOT_ show HOSTNAME in the list at all
Closes#10141
Signed-off-by: Doug Davis <dug@us.ibm.com>
Fixes#9960
This adds the output of a "Backing Filesystem:" entry to `docker info`
to overlay, aufs, and devicemapper graphdrivers. The default list
includes a fairly complete list of common filesystem names from
linux/include/uapi/linux/magic.h, but if the backing filesystem is not
recognized, the code will simply show "<unknown>"
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com>
The documentation on `docker export` doesn't mention that
data in volumes is not included in the export.
This adds a note that volumes are not part of the export
and refers to the "Backup, restore, or migrate data volumes"
to give the user some pointers.
Relates to https://github.com/docker/docker/issues/10095
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add a --readonly flag to allow the container's root filesystem to be
mounted as readonly. This can be used in combination with volumes to
force a container's process to only write to locations that will be
persisted. This is useful in many cases where the admin controls where
they would like developers to write files and error on any other
locations.
Closes#7923Closes#8752
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
We want to be able to use container without the PID namespace. We basically
want containers that can manage the host os, which I call Super Privileged
Containers. We eventually would like to get to the point where the only
namespace we use is the MNT namespace to bring the Apps userspace with it.
By eliminating the PID namespace we can get better communication between the
host and the clients and potentially tools like strace and gdb become easier
to use. We also see tools like libvirtd running within a container telling
systemd to place a VM in a particular cgroup, we need to have communications of the PID.
I don't see us needing to share PID namespaces between containers, since this
is really what docker exec does.
So currently I see us just needing docker run --pid=host
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Add a check to make sure Dockerfile is in the build context
Add docs and a testcase
Make -f relative to current dir, not build context
Signed-off-by: Doug Davis <dug@us.ibm.com>
If .dockerignore mentions either then the client will send them to the
daemon but the daemon will erase them after the Dockerfile has been parsed
to simulate them never being sent in the first place.
an events test kept failing for me so I tried to fix that too
Closes#8330
Signed-off-by: Doug Davis <dug@us.ibm.com>
as noted in https://github.com/boot2docker/boot2docker/issues/690
Signed-off-by: Sven Dowideit <SvenDowideit@docker.com>
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@docker.com> (github: SvenDowideit)
--help and help are successful commands so output should not go to error.
QE teams have requested this change, also users doing docker help | less
or docker run --help | less would expect this to work.
Usage statement should only be printed when the user asks for it.
Errors should print error message and then suggest the docker COMMAND --help
command to see usage information.
The current behaviour causes the user to have to search for the error message
and sometimes scrolls right off the screen. For example a error on a
"docker run" command is very difficult to diagnose.
Finally erros should always exit with a non 0 exit code, if the user
makes a CLI error.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au>
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au> (github: SvenDowideit)
Signed-off-by: Sven Dowideit <SvenDowideit@docker.com>
Moved Tianon's PR from: https://github.com/docker/docker/pull/7870
on top of the latest code
Closes: #3936
Signed-off-by: Andrew Page <admwiggin@gmail.com>
Signed-off-by: Doug Davis <dug@us.ibm.com>
Forbid `docker run -t` with a redirected stdin (such as `echo test |
docker run -ti busybox cat`). Forbid `docker exec -t` with a redirected
stdin. Forbid `docker attach` with a redirect stdin toward a tty enabled
container.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
inspired by #9448 and #9487
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@docker.com> (github: SvenDowideit)
Signed-off-by: Sven Dowideit <SvenDowideit@docker.com>
inspired by #9452
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@docker.com> (github: SvenDowideit)
Signed-off-by: Sven Dowideit <SvenDowideit@docker.com>
This adds the docker daemon's root directory to docker info when running
in debug mode. This allows the user to view the root directory where
docker is writing and storing state.
Signed-off-by: Michael Crosby <crosbymichael@gmail.com>
Current description is misleading. It make an impression the --icc=false
prevents containers to talk with each other.
Signed-off-by: Michal Minar <miminar@redhat.com>
Docker-DCO-1.1-Signed-off-by: Michal Minar <miminar@redhat.com> (github: SvenDowideit)
I've re-jigged the run man page so that each option's text begins with the
cli's help text for that flag, and then ay subsequent lines in the man page
are carried forward.
Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au>
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au> (github: SvenDowideit)
The documentation for EXPOSE seems to indicate, that EXPOSE is only relevant in
the context of links, which is not the case.
Signed-off-by: Jacob Atzen <jatzen@gmail.com>
I also needed to add a mflag.IsSet() function that allows you to check
to see if a certain flag was actually specified on the cmd line.
Per #9221 - also tweaked the docs to fix a typo.
Closes#9221
Signed-off-by: Doug Davis <dug@us.ibm.com>
still supports the old form: ENV name value
Also, fixed an issue with the parser where it would ignore lines
at the end of the Dockerfile that ended with \
Closes#2333
Signed-off-by: Doug Davis <dug@us.ibm.com>
COPY/ADD just copies the contents of dirs, not dirs themselves.
This PR tries to clear that up in the docs.
Closes#8775
Signed-off-by: Doug Davis <dug@us.ibm.com>
Signal proxy does work only in non-TTY mode (--tty=false). Man pages and
commands should not lie about it.
Signed-off-by: Michal Minar <miminar@redhat.com>
Next steps, in another PR, would be:
- make all logging go through the logrus stuff
- I'd like to see if we can remove the env var stuff (like DEBUG) but we'll see
Closes#5198
Signed-off-by: Doug Davis <dug@us.ibm.com>
Some workloads rely on IPC for communications with other processes. We
would like to split workloads between two container but still allow them
to communicate though shared IPC.
This patch mimics the --net code to allow --ipc=host to not split off
the IPC Namespace. ipc=container:CONTAINERID to share ipc between containers
If you share IPC between containers, then you need to make sure SELinux labels
match.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
The note under the RUN header refers to the CMD instruction. It should refer to the RUN instruction instead.
Signed-off-by: Huu Nguyen <whoshuu@gmail.com>
Reuse WORKDIR wording to specify that the USER instructions affect the
following RUN, CMD, and ENTRYPOINT instructions.
Signed-off-by: Arnaud Porterie <arnaud.porterie@docker.com>
Includes changes to mkdocs yml and removes style info from docs Read Me, adding a link instead.
Docker-DCO-1.1-Signed-off-by: Fred Lifton <fred.lifton@docker.com> (github: fredlf)
Conflicts:
docs/README.md
Revisions to style guide based on review.
Docker-DCO-1.1-Signed-off-by: Fred Lifton <fred.lifton@docker.com> (github: fredlf)
More Style Guide revisions based on review.
Docker-DCO-1.1-Signed-off-by: Fred Lifton <fred.lifton@docker.com> (github: fredlf)
A few more style guide copy edits
Docker-DCO-1.1-Signed-off-by: Fred Lifton <fred.lifton@docker.com> (github: fredlf)
Made a few tweaks to Dockerfile tutorial links and removed some cruft from the tutorial itself.
Docker-DCO-1.1-Signed-off-by: Fred Lifton <fred.lifton@docker.com> (github: fredlf)
The Dockerfile Instruction to create the .vnc directory results in a failure :
-storepasswd failed for file: /root/.vnc/passwd
Signed-off-by: Madhu Venugopal <madhu@socketplane.io>
Add some information about the storage and execution driver choices
Docker-DCO-1.1-Signed-off-by: SvenDowideit <SvenDowideit@home.org.au> (github: SvenDowideit)
and move the complicated discussion about branches lower down,
hopefully most won't need to know
Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au>
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au> (github: SvenDowideit)
This makes it possible to make the Docker client "secure by default"
without wrapping the binary in a shell alias so that `--tlsverify` is
always passed.
Signed-off-by: Aanand Prasad <aanand.prasad@gmail.com>
*. Fixed headings so the side menu will now be consistent. Some sections
had H3s that were displaying and others did not leaving the left menu
very mismatched.
* Fixed several spelling errors.
* Re-formatted several long lines and badly laid out paragraphs.
* Fixed several double backticks.
* Added backticks to several outputs and variables.
* Removed two issues that are no longer valid.
* Removed several double spaces and extra lines.
Docker-DCO-1.1-Signed-off-by: James Turnbull <james@lovedthanlost.net> (github: jamtur01)
security-opts will allow you to customise the security subsystem.
For example the labeling system like SELinux will run on a container.
--security-opt="label:user:USER" : Set the label user for the container
--security-opt="label:role:ROLE" : Set the label role for the container
--security-opt="label:type:TYPE" : Set the label type for the container
--security-opt="label:level:LEVEL" : Set the label level for the container
--security-opt="label:disabled" : Turn off label confinement for the container
Since we are passing a list of string options instead of a space separated
string of options, I will change function calls to use InitLabels instead of
GenLabels. Genlabels interface is Depracated.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
For the cases where --bip option is used it is sometimes best to disable
IP masquerading as the provided bridge IP range may be routable.
Signed-off-by: Eugene Yakubovich <eugene.yakubovich@coreos.com>
This adds a --add-host host:ip flag which appends lines to /etc/hosts. This is needed in places where you want the container to get a different name resolution than it would through DNS. This was submitted before as #5525, closed, and now I am re-opening. It has come up 2 or 3 times in the last couple days.
Signed-off-by: Tim Hockin <thockin@google.com>
This exposes the already existing "create container" operation. It is
very similar to "docker run -d" except it doesn't actually start the
container, but just prepares it. It can then be manually started using
"docker start" at any point.
Docker-DCO-1.1-Signed-off-by: Alexander Larsson <alexl@redhat.com> (github: alexlarsson)
Conflicts:
api/client/commands.go
runconfig/parse.go
server/container.go
Docker-DCO-1.1-Signed-off-by: Tibor Vass <teabee89@gmail.com> (github: tiborvass)
Use utils.RFC3339NanoFixed ("2006-01-02T15:04:05.000000000Z07:00")
instead of time.RFC3339Nano to format our log timestamps - this way
things are aligned, in particular the nano seconds are padded with zeros
Signed-off-by: Doug Davis <dug@us.ibm.com>
I've moved the docs.css to last so it can tweak any existing css, and
then set that to the same grey colour used for 'normal' text.
While testing I found and fixed an over-zealous line wrap.
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@docker.com> (github: SvenDowideit)
Adds support for a --registry-mirror=scheme://<host>[:port]
daemon flag. The flag may be present multiple times. If
provided, mirrors are prepended to the list of endpoints used
for image pull. Note that only mirrors of the public
index.docker.io registry are supported, and image/tag resolution
is still performed via the official index.
Docker-DCO-1.1-Signed-off-by: Tim Smith <timbot@google.com> (github: timbot)
Now from a single invocation of `docker save`, you can specify multiple
images to include in the output tar, or even just multiple tags of a
particular image/repo.
```
> docker save -o bundle.tar busybox ubuntu:lucid ubuntu:saucy fedora:latest
> tar tf ./bundle.tar | wc -l
42
> tar xOf ./bundle.tar repositories
{"busybox":{"latest":"2d8e5b282c81244037eb15b2068e1c46319c1a42b80493acb128da24b2090739"},"fedora":{"latest":"58394af373423902a1b97f209a31e3777932d9321ef10e64feaaa7b4df609cf9"},"ubuntu":{"lucid":"9cc9ea5ea540116b89e41898dd30858107c1175260fb7ff50322b34704092232","saucy":"9f676bd305a43a931a8d98b13e5840ffbebcd908370765373315926024c7c35e"}}
```
Further, this fixes the bug where the `repositories` file is not created
when saving a specific tag of an image (e.g. ubuntu:latest)
document multi-image save and updated API docs
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
--help and help are successful commands so output should not go to error.
QE teams have requested this change, also users doing docker help | less
or docker run --help | less would expect this to work.
Usage statement should only be printed when the user asks for it.
Errors should print error message and then suggest the docker COMMAND --help
command to see usage information.
The current behaviour causes the user to have to search for the error message
and sometimes scrolls right off the screen. For example a error on a
"docker run" command is very difficult to diagnose.
Finally erros should always exit with a non 0 exit code, if the user
makes a CLI error.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
issue #7580 volumes-from comma separated list mentioned this case.
Options like --volumes-from=[] indicate they can be specified multiple times:
docker run -it --rm --volumes-from TEST_DATA --volumes-from TEST_DATA2 ubuntu bash
Signed-off-by: Deshi Xiao <dxiao@redhat.com>
* starting with filtering for exit codes. `docker ps -a --filter 'exited=1'`
* API doc for filter parameter
* formatting filters for help usage
* tweaks for review
This requires https://github.com/dotcloud/docker/pull/4430
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
`rm -f` was originally deprecated in favor of `rm --stop/--kill` since `rm
-f` was sending SIGTERM and potentially very slow.
Instead this will bring back `rm -f` but use SIGKILL isntead
Docker-DCO-1.1-Signed-off-by: Brian Goff <cpuguy83@gmail.com> (github: cpuguy83)
/tmp is often a tmpfs file system and large temporary files could cause
docker commands to fail. Also using /tmp potentially allows users on the
system to get access to content, or even attack the content. Moving the tmpdir to
/var/lib/container/tmp will protect the data.
Docker-DCO-1.1-Signed-off-by: Dan Walsh <dwalsh@redhat.com> (github: rhatdan)
Conflicts:
docker/docker.go
The ENTRYPOINT example uses "/usr/bin/ls" as path, but `ls` is located at `/bin/ls`.
Docker-DCO-1.1-Signed-off-by: Sebastiaan van Stijn <github@gone.nl> (github: thaJeztah)
"docker logout [SERVER]" will remove the registry server' credentials from
.dockercfg file. If a server is not specified, it will log user out of the
default docker registry server
Docker-DCO-1.1-Signed-off-by: Daniel, Dao Quang Minh <dqminh89@gmail.com> (github: dqminh)
We add a --device flag which can be used like:
docker run --device /dev/sda:/dev/xvda:rwm ubuntu /bin/bash
To allow the container to have read write permissions to access the host's /dev/sda via a node named /dev/xvda in the container.
Note: Much of this code was written by Dinesh Subhraveti dineshs@altiscale.com (github: dineshs-altiscale) and so he deserves a ton of credit.
Docker-DCO-1.1-Signed-off-by: Timothy <timothyhobbs@seznam.cz> (github: timthelion)
Currently the docker logs timestamp flag generates log entries like:
$ sudo docker logs -ft daemon_dave
[May 10 13:06:17.934] hello world
It uses Go's StampMilli timestamp to generate the timestamp. The entry
is also wrapped in [ ].
This is non-standard operational timestamp and one that will require
custom parsing.
The new timestamp is RFC3999Nano and generates entries like:
2014-05-10T17:42:14.999999999Z07:00 hello world
These are readily parsed by tools like ELK.
Docker-DCO-1.1-Signed-off-by: James Turnbull <james@lovedthanlost.net> (github: jamtur01)
Docker-DCO-1.1-Signed-off-by: Tibor Vass <teabee89@gmail.com> (github: tiborvass)
And also move it in to the `ADD` section, rather than being hidden in the `RUN` section.
Docker-DCO-1.1-Signed-off-by: Daniel Watkins <daniel@daniel-watkins.co.uk> (github: OddBloke)
The Docker btrfs graph driver does not interact well with SELinux at present.
If btrfs mounts the same file in several locations, the same SELinux label will
be applied to all mountpoints. In the context of the graph driver, things such
as shared libraries become inaccessible to containers due to SELInux, causing
all dynamically linked applications to fail when run in a container.
Consequently, error when we detect the daemon is being run with SELinux enabled
and the btrfs driver. Documentation has been added for this behavior.
Docker-DCO-1.1-Signed-off-by: Matthew Heon <mheon@redhat.com> (github: mheon)
Initiates a pause before committing a container,
adds a pause option to the commit command, defaulting to 'true'.
Fixes bug: #6267
Fixes bug: #3675
Docker-DCO-1.1-Signed-off-by: Eric Windisch <ewindisch@docker.com> (github: ewindisch)
Docker's --sig-proxy option sends all signals but one to a container. The
exception s SIGCHLD, which is deliberately ignored as it doesn't make sense to
send such a signal to a process in a container. Documentation updates will make
this less confusing if anyone does attempt to do this.
Docker-DCO-1.1-Signed-off-by: Matt Heon <mheon@redhat.com> (github: mheon)
This will allow us to _know_ what the user's -H settings are, which may
be useful for debugging later.
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@fosiki.com> (github: SvenDowideit)
as a maintainer.
Best of luck on your e-commerce business Guillaume, and thanks for all
the great contributions!
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This behavior changed from v0.9 to v0.10, so document it to prevent
any confusion.
Docker-DCO-1.1-Signed-off-by: Matthew Heon <mheon@redhat.com> (github: mheon)
This reverts commit 2819677c215bd409b4ce4da51f0ddfb303760796.
Docker-DCO-1.1-Signed-off-by: James Turnbull <james@lovedthanlost.net> (github: jamtur01)
This is a new feature and flag. (replaces the suggestion of a flag for
--untagged images).
The concept is to have a syntax to filter. This begins with this
filtering for the 'images' subcommand, and at that only filtering for
whether images are untagged.
example like: docker rmi $(docker images -q --filter 'untagged=true')
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
* Added User Guide section outlines.
* Added User Guide to menu.
* Moved HTTPS example to articles.
* Replaced Hello World example with User Guide.
* Moved use cases out of examples.
* Updated Introduction to add User Guide.
* Redirected migrated /use and /articles links.
* Added Docker.io section
* Added Dockerized section
* Added Using Docker section
* Added Docker Images section
* Added Docker Links section
* Added Docker Volumes section
Docker-DCO-1.1-Signed-off-by: James Turnbull <james@lovedthanlost.net> (github: jamtur01)
This adds a COPY command to docker build which works like ADD, but is
only for local files and it doesn't extract files.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
Docker-DCO-1.1-Signed-off-by: Robin Speekenbrink <robin@kingsquare.nl> (github: fruitl00p)
rebased by
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au> (github: SvenDowideit)
This adds a `--force-rm` flag to docker build which makes the Docker
daemon clean up all containers, even when the build has failed.
This new flag requires that we bump the remote API, so we also bump the
remote API version.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
The file was saved as busybox.tar, but the ls commands named it b.tar.
Docker-DCO-1.1-Signed-off-by: Steven Burgess <steven.a.burgess@hotmail.com> (github: stevenburgess)
This adds a few lines to the RUN Dockerfile docs to explain how to
bypass the RUN caching and how ADD can also invalidate the cache for
these instructions.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
In the documentation was not mentioned explicitly that VOLUME value
shoud be a valid JSON array. Because of this I spent time to discovering
the problem with my image where I put `VOLUME ['/data']` (with single quotes).
The `['/data']` mount point was parsed and mounted whole as a string without
any errors and warnings.
Docker-DCO-1.1-Signed-off-by: Max Shytikov <mshytikov@gmail.com> (github: mshytikov)
I've seen one other missing space that I addressed in another PR already.
I don't know whether that is a common occurrence in the docs.
About the second diff chunk, it looks like some copy-paste mistake to me.
Docker-DCO-1.1-Signed-off-by: Felix Rabe <felix@rabe.io> (github: felixrabe)
This PR aims to increase the consistency across the docs for
code blocks and code/comment/output markings.
Rule followed here is "what's visible on the screen should be reflected"
Issue:
- Docs had various code blocks showing: comments, commands & outputs.
- All three of these items were inconsistently marked.
Some examples as to how this PR aims to introduce improvements:
1. Removed `> ` from in front of the "outputs". Eg,
` > REPOSITORY TAG ID CREATED` replaced with:
` REPOSITORY TAG ID CREATED`.
2. Introduced `$` for commands. Eg,
` sudo chkconfig docker on` replaced with:
` $ sudo chkconfig docker on`
3. Comments:
` > # ` replaced with:
` # `.
> Please note:
> Due to a vast amount of items reviewed and changed for this PR, there
> might be some individually incorrect replacements OR patterns of incorrect
> replacements. This PR needs to be reviewed and if there is anything missing,
> it should be improved or amended.
Closes:
https://github.com/dotcloud/docker/issues/5286
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
This adds back in the references to private repositories and
provides some refactoring to the Working with repositories
documentation including updating references to the "Central"
registry to Docker.io.
It also:
* Fixes some links and references to Central Index
* Fixes anchors in other files to updated titles in Working with Repositories.
* Renamed Central Index in the remaining places.
* Updated terms documentation to reflect Docker.io
* Updated some Docker Index naming to be consistent.
* Updates menu labels and hyperlinks.
Docker-DCO-1.1-Signed-off-by: James Turnbull <james@lovedthanlost.net> (github: jamtur01)
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
- Mention that [] options may be specified multiple times on the Usage page
Docker-DCO-1.1-Signed-off-by: Mike MacCana <mike.maccana@gmail.com> (github: mikemaccana)
Docker-DCO-1.1-Signed-off-by: Mike MacCana <mike.maccana@gmail.com> (github: SvenDowideit)
relative paths, and also fixed some broken images.
There are still more todo - next PR I think :)
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@fosiki.com> (github: SvenDowideit)
- Remove redundant chars and all errors caused by RST->MD conversion.
e.g. [/#, /\, \<, />, etc.]
- Fix broken inter-document links
- Fix outbound links no-longer active or changed
- Fix lists
- Fix code blocks
- Correct apostrophes
- Replace redundant inline note marks for code with code marks
- Fix broken image links
- Remove non-functional title links
- Correct broken cross-docs links
- Improve readability
Note: This PR does not try to fix/amend:
- Grammatical errors
- Lexical errors
- Linguistic-logic errors etc.
It just aims to fix main structural or conversion errors to serve as
a base for further amendments that will cover others including but
not limited to those mentioned above.
Docker-DCO-1.1-Signed-off-by: O.S. Tezer <ostezer@gmail.com> (github: ostezer)
Update:
- Fix backtick issues
Docker-DCO-1.1-Signed-off-by: Sven Dowideit <SvenDowideit@home.org.au> (github: SvenDowideit)
Warn users of the planned deprecation of 'docker commit --run', and hide
it from the docs and usage message. The option continues to work.
Note that an alternative to 'commit --run' is being implemented but is
not yet available. We are printing the warning anyway because on
the basis that it never hurts to give more advance warning.
The 'commit --run' flag is a leftover from the very early days of Docker,
and has several problems:
1) It is very user unfriendly. You have to pass a literal json dict
which is poorly documented and changes regularly (see PortSpecs vs
ExposedPorts). The merge behavior is not clear and also changes
regularly. it's not possible to unset a value.
2) It overlaps with the Dockerfile syntax. There are 2 ways to set
a default command, expose a port or change an env variable. Some
things can be done in a Dockerfile but not in --run. Some things
can be done in --run but not in a Dockerfile. It would be better
to push a single syntax, allow using it both in a file and via
the command line, and make improvements in a single place.
3) It exposes data structures which should not be publicly exposed.
There are several planned improvements to Docker which require moving
around the content and schema of the various Config, Image and Container
structures. The less of those we expose in public interfaces, the easier
it is to move things around without a reverse compatibility nightmare.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
'docker insert' is an old command which predates 'docker build'. We no
longer recommend using it, it is not actively maintained, and can be
replaced with the combination of 'docker build' and 'ADD'.
This removes the command from usage and documentation, and prints a
warning when it is called.
The command still works but it will be removed in a future version.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
* The commands are no longer listed or documented.
* The commands still work but print a deprecation warning.
* The commands should be removed in a future version.
Docker-DCO-1.1-Signed-off-by: Solomon Hykes <solomon@docker.com> (github: shykes)
This adds a bit of documentation for the `-a` flag for docker run.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
match dock functionality, and not try to achieve shell-sourcing compatibility
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
This reverts commit 8b5cf51d600dc4f3611cf063c52cf3448e7b01e5.
Docker-DCO-1.1-Signed-off-by: Michael Crosby <michael@crosbymichael.com> (github: crosbymichael)
Add a --dns-search parameter and a DnsSearch
configuration field for specifying dns search
domains.
Docker-DCO-1.1-Signed-off-by: Daniel Norberg <daniel.norberg@gmail.com> (github: danielnorberg)
Also renames --since-id/--before-id to --since/--before and add errors
on non-existent containers.
Docker-DCO-1.1-Signed-off-by: Alexandr Morozov <lk4d4math@gmail.com> (github: LK4D4)
These were found using `git grep -nE '[^-a-zA-Z0-9<>]-[a-zA-Z0-9]{2}'` (fair warning: _many_ false positives there).
Docker-DCO-1.1-Signed-off-by: Andrew Page <admwiggin@gmail.com> (github: tianon)
commit baa70e975186bb0ee8a4b16b9374cb6e794f8975 duplicates
the description of --mtu.
This patch removes the duplicated description.
Docker-DCO-1.1-Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com> (github: ichik1)
Fix docs and help messages of --iptables and --ip-forward to describe the true case behaviour
Docker-DCO-1.1-Signed-off-by: Ken ICHIKAWA <ichikawa.ken@jp.fujitsu.com> (github: ichik1)
URL of documentation page is: http://docs.docker.io/en/latest/reference/commandline/cli/#ps
Docker-DCO-1.1-Signed-off-by: Scott Collier <emailscottcollier@gmail.com> (github: scollier)
Adding the new options to the `docker ps` documentation.
URL of documentation page is: http://docs.docker.io/en/latest/reference/commandline/cli/#ps
Docker-DCO-1.1-Signed-off-by: Scott Collier <emailscottcollier@gmail.com> (github: scollier)
Adding CLI options to the commandline reference documentation.
URLs of pages are:
http://docs.docker.io/en/latest/reference/commandline/cli/
Docker-DCO-1.1-Signed-off-by: Scott Collier <emailscottcollier@gmail.com> (github: scollier)
changing indention
Docker-DCO-1.1-Signed-off-by: Scott Collier <emailscottcollier@gmail.com> (github: scollier)
This removes the incomplete symlink handling from engine.go and it adds
it one place in docker.go.
It also enables handling symlinks for TMPDIR.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
like the storage-driver flag, this implements a flag for choosing the
execdriver to be used, defaulting to lxc.
Docker-DCO-1.1-Signed-off-by: Vincent Batts <vbatts@redhat.com> (github: vbatts)
This changes the way onbuild works:
- forbids the chaining of onbuild instructions
- forbids the use of `onbuild from`
- forbids the use of `onbuild maintainer`
It also makes docker throw errors when encountering such triggers when
executing the triggers during `FROM`.
Three tests have been added:
- ensure that chained onbuild (`onbuild onbuild`) is forbidden
- ensure that `onbuild from` is forbidden
- ensure that `onbuild maintainer` is forbidden
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
This stops docker from accepting tcp:// as a valid bind address.
Docker-DCO-1.1-Signed-off-by: Cristian Staretu <cristian.staretu@gmail.com> (github: unclejack)
as suggested by SvenDowideit expand the docs to have more information on
socket activation.
Docker-DCO-1.1-Signed-off-by: Brandon Philips <brandon.philips@coreos.com> (github: philips)
update docker.go
move to pkg
update docs
update name and copyright
change --sinceId to --since-id, update completion and docs
Docker-DCO-1.1-Signed-off-by: Victor Vieux <victor@docker.com> (github: vieux)
* changed conf.py to reference toctree.rst instead of index
* Added note to README to upgrade your sphinx to the latest version to prevent a bug with .. note:: blocks.
André Martins
Colm Hally
Bradley Cicenas
Ahmet Alp Balkan
Doug Davis
Jessica Frazelle
Peter Salvatore
Arnaud Porterie
Sven Dowideit
Michael A. Smith
Alexander Morozov
Katie McLaughlin
Qiang Huang
Chen Hanxiao
Michael Crosby
Sven Dowideit
Lei Jitang
Sebastiaan van Stijn
Liang-Chi Hsieh
Phil Estes
Nathan Hsieh
Dan Walsh
Srini Brahmaroutu
Andreas Köhler
Malte Janduda
Jan Koprowski
Christian Stefanescu
Fred Lifton
shishir-a412ed
Michal Minar
Lénaïc Huard
Sindhu S
Tomas Tomecek
Alexander Boyd
Jacob Atzen
James Turnbull
Michael Steinert
Victor Vieux
Aidan Hobson Sayers
Dmitry V. Krivenok
unclejack
Vincent Batts
pixelistik
decadent
George Xie
Huu Nguyen
Arnaud Porterie
Huayi Zhang
Andrea Luzzardi
Erik Hollensbe
Madhu Venugopal
Ryan Detzel
Tibor Vass
Michael Crosby
Aanand Prasad
Adrien Folie
Vishnu Kannan
Daniel Farrell
Dan Cotora
Frederick F. Kautz IV
Alexandr Morozov
Jyrki Puttonen
Andrey Petrov
Eugene Yakubovich
Albert Callarisa
Tim Hockin
Alexander Larsson
Tim Smith
Deshi Xiao
Solomon Hykes
Patrick Hemmer
satoru
Brian Goff
Tianon Gravi
Sebastiaan van Stijn
Matthew Heon
Daniel, Dao Quang Minh
Henning Sprang
Timothy
Bryan Bess
OddBloke
Felix Rabe
Eric Windisch
Travis Cline
O.S. Tezer
Sven Dowideit
Jezeniel Zapanta
Johan Euphrosine
Jonathan Boulle
David Gageot
Paul Weaver
Jan Pazdziora
AJ Bowen
Michael Prokop
Álvaro Lázaro
Chris Snow
FLGMwt
Robin Speekenbrink
Jérôme Petazzoni
Jonathan McCrohan
Steven Burgess
Joel Handwell
Michael Crosby
Jilles Oldenbeuving
Max Shytikov
Mason Malone
Bryan Murphy
Mike MacCana
Isabel Jimenez
Solomon Hykes
Guillaume J. Charmes
Vincent Batts
Jason Plum
Justin Simonelis
Daniel Norberg
Daniel Norberg
Johannes 'fish' Ziemke
Victor Vieux
Ken ICHIKAWA
Wes Morgan
Scott Collier
Tom Fotherby
Evan Krall
ILYA Khlopotov
Danny Berger
Andy Rothfusz
Song Gao
Dafydd Crosby
Brandon Philips
Paul Lietar
Maxime Petazzoni
Victor Vieux
Paul
John Feminella
Andy Rothfusz
Pascal Borreli
Thatcher Peskens
Daniel Gasienica