The State field allows printing the container state without
additional information about uptime, healthcheck, etc.
With this patch, the container's state can be printed independently:
```bash
docker ps -a --format '{{.State}}'
running
paused
exited
created
```
```bash
docker ps -a --format 'table {{.Names}}\t{{.State}}\t{{.Status}}'
NAMES STATE STATUS
elastic_burnell running Up About a minute
pausie paused Up 5 minutes (Paused)
peaceful_stonebraker exited Exited (0) 10 hours ago
vigilant_shaw created Created
```
```bash
docker ps -a --format 'raw'
container_id: 0445f73f3a71
image: docker-cli-dev
command: "ash"
created_at: 2019-07-12 11:16:11 +0000 UTC
state: running
status: Up 2 minutes
names: elastic_burnell
labels:
ports:
container_id: 1aff69a3912c
image: nginx:alpine
command: "nginx -g 'daemon of ..."
created_at: 2019-07-12 11:12:10 +0000 UTC
state: paused
status: Up 6 minutes (Paused)
names: pausie
labels: maintainer=NGINX Docker Maintainers <docker-maint@nginx.com>
ports: 80/tcp
container_id: d48acf66c318
image: alpine:3.9.3
command: "id -u"
created_at: 2019-07-12 00:52:17 +0000 UTC
state: exited
status: Exited (0) 10 hours ago
names: peaceful_stonebraker
labels:
ports:
container_id: a0733fe0dace
image: b7b28af77ffe
command: "/bin/sh -c '#(nop) ..."
created_at: 2019-07-12 00:51:29 +0000 UTC
state: created
status: Created
names: vigilant_shaw
labels:
ports:
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
1. Adds `docker events` description info on the two scope types of events.
2. Adds `docker events` note in two places about backlog limit of event log.
Further info and background info in Issue 727
Signed-off-by: Bret Fisher <bret@bretfisher.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `aufs` storage driver is deprecated in favor of `overlay2`, and will
be removed in a future release. Users of the `aufs` storage driver are
recommended to migrate to a different storage driver, such as `overlay2`, which
is now the default storage driver.
The `aufs` storage driver facilitates running Docker on distros that have no
support for OverlayFS, such as Ubuntu 14.04 LTS, which originally shipped with
a 3.14 kernel.
Now that Ubuntu 14.04 is no longer a supported distro for Docker, and `overlay2`
is available to all supported distros (as they are either on kernel 4.x, or have
support for multiple lowerdirs backported), there is no reason to continue
maintenance of the `aufs` storage driver.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Co-Authored-By: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Andrew Hsu <andrewhsu@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
--from creates a context from a named context.
By default `context create` will create a context from the current context.
Replaced "from-current=" docker/kubernetes option with "from=" to allow specifying which context to copy the settings from.
Signed-off-by: Nick Adcock <nick.adcock@docker.com>
This is a bit manual (as the unit test attests) so we may find we want to add
some helpers/accessors, but this is enough to let plugins use it and to
preserve the information through round-trips.
Signed-off-by: Ian Campbell <ijc@docker.com>
This means that plugins can use whatever methods the monolithic CLI supports,
which is good for consistency.
This relies on `os.Args[0]` being something which can be executed again to
reach the same binary, since it is propagated (via an envvar) to the plugin for
this purpose. This essentially requires that the current working directory and
path are not modified by the monolithic CLI before it launches the plugin nor
by the plugin before it initializes the client. This should be the case.
Previously the fake apiclient used by `TestExperimentalCLI` was not being used,
since `cli.Initialize` was unconditionally overwriting it with a real one
(talking to a real daemon during unit testing, it seems). This wasn't expected
nor desirable and no longer happens with the new arrangements, exposing the
fact that no `pingFunc` is provided, leading to a panic. Add a `pingFunc` to
the fake client to avoid this.
Signed-off-by: Ian Campbell <ijc@docker.com>
That is, reindent the two sections by one space.
While the code was done by hand the `.golden` files had the extra space
inserted with emacs' `string-insert-rectangle` macro to (try to) avoid possible
manual errors. The docs were edited the same way.
Signed-off-by: Ian Campbell <ijc@docker.com>
Right now the only client side info we have is whether debug is enabled, but we
expect more in the future.
We also preemptively prepare for the possibility of multiple errors when
gathering both daemon and client info.
Signed-off-by: Ian Campbell <ijc@docker.com>
Last batch of modifications to the context switch implementation missed
some documentation updates. This is an update to the CLI reference and
the store implementation Godoc.
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
Add `--quiet` to the `docker image pull` subcommand that will not pull
the image quietly.
```
$ docker pull -q golang
Using default tag: latest
```
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
A while ago, Docker split the "Domainname" field out from the "Hostname"
field for the container configuration. There was no real user-visible
change associated with this (and under the hood "Domainname" was mostly
left unused from the command-line point of view). We now add this flag
in order to match other proposed changes to allow for setting the NIS
domainname of a container.
This also includes a fix for the --hostname parsing tests (they would
not error out if only one of .Hostname and .Domainname were incorrectly
set -- which is not correct).
Signed-off-by: Aleksa Sarai <asarai@suse.de>
A similar change was made in the CLI itself, but is not
inherited by the code that generates the YAML docs.
Before this patch is applied;
```
usage: docker container exec [OPTIONS] CONTAINER COMMAND [ARG...] [flags]
```
With this patch applied:
```
usage: docker container exec [OPTIONS] CONTAINER COMMAND [ARG...]
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This PR chnages allow user to configure data path
port number. By default we use 4789 port number. But this commit
will allow user to configure port number during swarm init.
Data path port can't be modified after swarm init.
Signed-off-by: selansen <elango.siva@docker.com>
log-opts are passed to logging-drivers as-is, so the daemon is not
aware what value-type each option takes.
For this reason, all options must be provided as a string, even if
they are used as numeric values by the logging driver.
For example, to pass the "max-file" option to the default (json-file)
logging driver, this value has to be passed as a string;
```json
{
"log-driver": "json-file",
"log-opts": {
"max-size": "10m",
"max-file": "3"
}
}
```
When passed as a _number_ (`"max-file": 3`), the daemon will invalidate
the configuration file, and fail to start;
unable to configure the Docker daemon with file /etc/docker/daemon.json: json: cannot unmarshal number into Go value of type string
This patch adds an example to the daemon.json to show these values
have to be passed as strings.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `devicemapper` storage driver is deprecated in favor of `overlay2`, and will
be removed in a future release. Users of the `devicemapper` storage driver are
recommended to migrate to a different storage driver, such as `overlay2`, which
is now the default storage driver.
The `devicemapper` storage driver facilitates running Docker on older (3.x) kernels
that have no support for other storage drivers (such as overlay2, or AUFS).
Now that support for `overlay2` is added to all supported distros (as they are
either on kernel 4.x, or have support for multiple lowerdirs backported), there
is no reason to continue maintenance of the `devicemapper` storage driver.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `overlay` storage driver is deprecated in favor of the `overlay2` storage
driver, which has all the benefits of `overlay`, without its limitations (excessive
inode consumption). The legacy `overlay` storage driver will be removed in a future
release. Users of the `overlay` storage driver should migrate to the `overlay2`
storage driver.
The legacy `overlay` storage driver allowed using overlayFS-backed filesystems
on pre 4.x kernels. Now that all supported distributions are able to run `overlay2`
(as they are either on kernel 4.x, or have support for multiple lowerdirs
backported), there is no reason to keep maintaining the `overlay` storage driver.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Unlike `docker build --secret`, `docker build --ssh` allows the build container to
use SSH keys with passphrases.
$ eval $(ssh-agent)
$ ssh-add ~/.ssh/id_rsa
(Input your passphrase here)
$ docker build --ssh default=$SSH_AUTH_SOCK ...
This feature requires the daemon with `CapExecMountSSH` build capability (moby/moby#37973) .
Currently, the official Dockerfile frontend does not provide the syntax for using the SSH forwarder.
However, the experimental `RUN --mount=type=ssh` syntax can be enabled by using
the Dockerfile frontend image built with the `BUILDTAGS="dfrunmount dfssh"`, via the `# syntax =` "shebang".
The Dockerfile for the Dockerfile frontend is available at github.com/moby/buildkit/frontend/dockerfile/cmd/dockerfile-frontend)
The pre-built image is also available as `tonistiigi/dockerfile:ssh20181002` .
An example Dockerfile with `RUN --mount=type=ssh`:
# syntax = tonistiigi/dockerfile:ssh20181002
FROM alpine
RUN apk add --no-cache openssh-client
RUN mkdir -p -m 0700 ~/.ssh && ssh-keyscan gitlab.com >> ~/.ssh/known_hosts
RUN --mount=type=ssh ssh git@gitlab.com | tee /hello
# "Welcome to GitLab, @GITLAB_USERNAME_ASSOCIATED_WITH_SSHKEY" should be printed here
More info available at moby/buildkit#608, moby/buildkit#655
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
ddadd3db49 mass standardized the
formatting, with some errors.
This commit fixes errors on `login.md`:
- revert wrong `Logging out` headline
- restore correct level for some headlines (relative to parent
headline level change)
- re-add `Usage` headlines, with better name
Also add `related commands` headline on `login` and `logout`.
Signed-off-by: Thomas Riccardi <thomas@deepomatic.com>
This feature brings new attribute/option for swarm init command.
default-addr-pool will take string input which can be in below format.
"CIDR,CIDR,CIDR...:SUBNET-SIZE".
Signed-off-by: selansen <elango.siva@docker.com>
e.g. docker -H ssh://me@server
The `docker` CLI also needs to be installed on the remote host to
provide `docker system dial-stdio`, which proxies the daemon socket to stdio.
Please refer to docs/reference/commandline/dockerd.md .
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
Changed unexpected Unicode character 0x1fbf GREEK PSILI that was standing in as an imposter for an apostrophe: an _impostrophe_.
Signed-off-by: Chad Faragher <wyckster@hotmail.com>
This patch hides the [flags] in the usage output of commands, using the
new `.DisableFlagsInUseLine` option, instead of the temporary workaround
added in 8e600e10f7
Before this change:
docker run
"docker run" requires at least 1 argument.
See 'docker run --help'.
Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...] [flags]
Run a command in a new container
After this change:
docker run
"docker run" requires at least 1 argument.
See 'docker run --help'.
Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...]
Run a command in a new container
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Version 1.1
Copyright (C) 2004, 2006 The Linux Foundation and its contributors.
1 Letterman Drive
Suite D4700
San Francisco, CA, 94129
Everyone is permitted to copy and distribute verbatim copies of this
license document, but changing it is not allowed.
Developer's Certificate of Origin 1.1
By making a contribution to this project, I certify that:
(a) The contribution was created in whole or in part by me and I
have the right to submit it under the open source license
indicated in the file; or
(b) The contribution is based upon previous work that, to the best
of my knowledge, is covered under an appropriate open source
license and I have the right under that license to submit that
work with modifications, whether created in whole or in part
by me, under the same open source license (unless I am
permitted to submit under a different license), as indicated
in the file; or
(c) The contribution was provided directly to me by some other
person who certified (a), (b) or (c) and I have not modified
it.
(d) I understand and agree that this project and the contribution
are public and that a record of the contribution (including all
personal information I submit with it, including my sign-off) is
maintained indefinitely and may be redistributed consistent with
this project or the open source license(s) involved.
Signed-off-by: nkwangleiGIT <nkwanglei@126.com>
This use case is currently _working correctly_, which is nice, but there is no documentation to be found about it. This PR fixes that.
Signed-off-by: Per Lundberg <perlun@gmail.com>
Update the docs so that users don't use `echo` when creating
secrets from STDIN. `echo` adds a trailing new line, so users
will probably be confused when their passwords don't work.
Signed-off-by: Joao Fernandes <joao.fernandes@docker.com>
Explicitly stated that you must add --build-arg for each build argument.
Added multiple arguments to example of `--build-arg` usage.
Fix for https://github.com/docker/docker.github.io/issues/6248
Signed-off-by: Preston Cowley <cowlinator@gmail.com>
This clarifies that the behaviour of `unless-stopped` will restart the container on daemon start. This was implied before, but now the restart-on-daemon-start behaviour is mentioned directly.
Signed-off-by: David Beitey <david@davidjb.com>
- explain the either "name" or "id" can be used to reference a container
- explain that signals can be sent by name or number
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This adds the Engine version to `docker node ls`, and `.EngineVersion` as a
template option.
With this patch applied:
docker node ls
ID HOSTNAME STATUS AVAILABILITY MANAGER STATUS ENGINE VERSION
wp9231itoqsh4rqceojqo01vp * linuxkit-025000000001 Ready Active Leader 18.01.0-ce
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`docker stack deploy` now support multiple composefil. This updates the
reference doc to take that fact into account.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Due to a copy/paste error, commands annotated with "swarm"
were incorrectly setting the "kubernetes" property.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- More strict on orchestrator flag
- Make orchestrator flag more explicit as experimental
- Add experimentalCLI annotation on kubernetes flags
- Better kubeconfig error message
- Prefix service name with stackname in ps and services stack subcommands
- Fix yaml documentation
- Fix code coverage ignoring generated code
Signed-off-by: Silvin Lubecki <silvin.lubecki@docker.com>
The "-f" flag is an alias for --force, not --filter (as correctly stated at the top of each documents). The system_prune.md didn't have this error.
Signed-off-by: Mateusz Major <apkd@users.noreply.github.com>
The `repository:shortid` syntax for referencing images is very little used,
collides with with tag references can be confused with digest references.
The `repository:shortid` notation was deprecated in Docker 1.13, and scheduled
for removal in Docker 17.12.
This patch updates the deprecation status for this feature.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit ddadd3db49 refactored
the markdown documentation, but accidentally changed
`on-failure` to `failure`.
This patch corrects this change.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- the `--disable-legacy-registry` daemon flag was removed
- duplicate keys with conflicting values for engine labels
now produce an error instead of a warning.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
ClusterHQ shutted down at the end of 2016. It seems that ScatterHQ is a group of ClusterHQ former employees that have forked Flocker. It seems that no code has been commited in the last months but if somebody comes to this Docker page it should be referenced to ScatterHQ.
Signed-off-by: Miguel Angel Alvarez Cabrerizo <doncicuto@gmail.com>
There is a typo in the `plugins_volume.md#volumedriverpath` section.
The `/VolumeDriver.Path` response (v1) should be `Mountpoint`and not `Mountpoin`.
Signed-off-by: scipio3000 <gunther@gameslabs.net>
Signed-off-by: Günther Jungbluth <gunther@gameslabs.net>
The `docker daemon` subcommand was only present for
backward compatibility, but deprecated in v1.13,
and scheduled for removal in v17.12
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fix 19 typos, grammatical errors and duplicated words.
These fixes have minimal impact on the code as these are either in the
doc files or in comments inside the code files.
Signed-off-by: Abdur Rehman <abdur_rehman@mentor.com>
The `--host-add` flag adds a new `host:ip` mapping. Even though
adding an entry is idempotent (adding the same mapping multiple
times does not update the service's definition), it does not
_update_ an existing mapping with a new IP-address (multiple
IP-addresses can be defined for a host).
This patch removes the "or update" part from the flag's
description.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The example in the documentation used "runc", which is a
reserved runtime name (as it's the default).
This patch updates the example, and uses a different name.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Since the API and the CLI both have a "Usage" field for memory, clarify
that the CLI does additional calculations to avoid confusion of API
consumers.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The experimental `docker build --squash` feature has a number
of limitations. For most use-cases, multi-stage builds are
a better alternative.
This patch lists the known limitations, and adds a link to
multi-stage builds.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- The default was not changed in 17.09 but will be in 17.10
- `service scale` and `service rollback` are also affected.
Signed-off-by: Harald Albers <github@albersweb.de>
Commit ddadd3db49 changed
the heading levels of various sections, but as a result,
the "daemon configuration file" section (and other sections)
changed from a H2 to a H4, therefore no longer showing
up in the page's TOC / navigation bar.
This patch changes the heading level to a H3 for
sections that should show up in the page navigation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
`strings.Trim()` strips any character listed in the `cutset` argument,
so any example section having `E`, `x`, `a`, `m`, `p`, `l`, `e`, or `s`
in the first word, had these characters missing in the generated
YAML.
Also trim superfluent whitespace characters to consistently use `|-` ("strip")
as block chomping indicator (see http://www.yaml.org/spec/1.2/spec.html#id2794534)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The update includes bug fixes in gometalinter and updates to linters, which
discovered more linter problems.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
This patch adds aditional information about commands to the YAML files
that are generated for the reference documentation.
The following fields are added for each command:
Property | Type | Description
------------------|-----------|---------------------------------------------------------------------------------------
deprecated | Boolean | Indicates if the command is marked deprecated
min_api_version | String | The API version required to use this command (e.g. "1.23")
experimental | Boolean | Indicates if the command requires the daemon to run with experimental features enabled
For example (taken from the experimental `docker checkpoint create` command):
command: docker checkpoint create
short: Create a checkpoint from a running container
long: Create a checkpoint from a running container
usage: docker checkpoint create [OPTIONS] CONTAINER CHECKPOINT
pname: docker checkpoint
plink: docker_checkpoint.yaml
options:
- option: checkpoint-dir
value_type: string
description: Use a custom checkpoint storage directory
deprecated: false
experimental: false
- option: leave-running
value_type: bool
default_value: "false"
description: Leave the container running after checkpoint
deprecated: false
experimental: false
deprecated: false
min_api_version: "1.25"
experimental: true
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch adds aditional information about command flags to the YAML files
that are generated for the reference documentation.
The following fields are added for each flag:
Property | Type | Description
------------------|-----------|---------------------------------------------------------------------------------------
value_type | String | The "type" of value to be passed to this flag (e.g., `uint64`, `list`)
deprecated | Boolean | Indicates if the flag is marked deprecated
min_api_version | String | The API version required to use this flag (e.g. "1.23")
experimental | Boolean | Indicates if the flag requires the daemon to run with experimental features enabled
For example (taken from the `docker image build` command):
- option: security-opt
value_type: stringSlice
default_value: '[]'
description: Security options
deprecated: false
experimental: false
- option: shm-size
value_type: bytes
default_value: "0"
description: Size of /dev/shm
deprecated: false
experimental: false
- option: squash
value_type: bool
default_value: "false"
description: Squash newly built layers into a single new layer
deprecated: false
min_api_version: "1.25"
experimental: true
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `--volumes` flag was added in 37fd6128dc,
but the documentation was not updated.
This patch updates the documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Commit 330a0035334871d92207b583c1c36d52a244753f added a `--detach=false` option
to various service-related commands, with the intent to make this the default in
a future version (17.09).
This patch changes the default to use "interactive" (non-detached), allowing
users to override this by setting the `--detach` option.
To prevent problems when connecting to older daemon versions (17.05 and below,
see commit db60f25561), the detach option is
ignored for those versions, and detach is always true.
Before this change, a warning was printed to announce the upcoming default:
$ docker service create nginx:alpine
saxiyn3pe559d753730zr0xer
Since --detach=false was not specified, tasks will be created in the background.
In a future release, --detach=false will become the default.
After this change, no warning is printed, but `--detach` is disabled;
$ docker service create nginx:alpine
y9jujwzozi0hwgj5yaadzliq6
overall progress: 1 out of 1 tasks
1/1: running [==================================================>]
verify: Service converged
Setting the `--detach` flag makes the cli use the pre-17.06 behavior:
$ docker service create --detach nginx:alpine
280hjnzy0wzje5o56gr22a46n
Running against a 17.03 daemon, without specifying the `--detach` flag;
$ docker service create nginx:alpine
kqheg7ogj0kszoa34g4p73i8q
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Noticed this warning in the documentation CI:
Liquid Warning: Liquid syntax error (line 210): Expected end_of_string but found id in "{{ log stream }}" in engine/extend/plugins_logging.md
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Implement runRollback to not use runUpdate
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Add version tag and add flag quiet to suppress progress output
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Removed flags from warnDetachDefault
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Used command.Cli interface
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Add detach flag on rollback command
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Create a fakeClient for service commands
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Added unit test for rollback command
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Used command.Cli interface instead of *command.DockerCli in service commands
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Revert "Removed flags from warnDetachDefault"
This reverts commit 3e4f601c8a82cc2599a755dc693409bbc47917fc.
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Fixed test.NewFakeCli instanciation
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Removed unused receiver
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Replaced cli by dockerCli
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Revert "Removed unused receiver"
This reverts commit 604ef7c13df3d019949ca81d992db501114dafce.
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Fixed last typo
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
the missing `driver` made my bridge not have the correct MTU when i copied from the example and not the doc table. Brings them into alignment.
Signed-off-by: bryfry <bryon@fryer.io>
This builds (and depends) on https://github.com/moby/moby/pull/34087
Version 2:
- remove --ipc argument validation (it is now done by daemon)
- add/document 'none' value
- docs/reference/run.md: add a table with better modes description
- dockerd(8) typesetting fixes
Version 3:
- remove ipc mode tests from cli/command/container/opts_test.go
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Since CLI was moved to a separate repo, these references are incorrect.
Fixed with the help of sed script, verified manually.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The `is-task` filter was only documented in the usage
section, but this section is not used in the documentation.
This patch adds the missing filter, synchronises the
man page source, and does some slight rephrasing
and reformatting of the filters.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is a new option added specifically to allow for debugging of bugs
in Docker's storage drivers or libdm itself.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
The Docker Compose docs suggest using a separate override
configuration file for production-specific settings, but
it is not obvious how to feed this to `docker stack deploy`,
which only supports a single Compose file as input. Thus,
we now describe how to do this by merging the configuration
files with `docker-compose config`.
Signed-off-by: Denis Washington <denis@denisw.de>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 2b8f0eef7338f37104464154ba65aef7db3b9703)
Signed-off-by: Tibor Vass <tibor@docker.com>
Add Casbin plugin to the list of Authorization plugins in docs.
(cherry picked from commit 220831d541bfe9bf566c1038773198d431560dd3)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 0ad3e3294e74f443130b5e1fb1ef6b31f4f92366)
Signed-off-by: Tibor Vass <tibor@docker.com>
remove extra word
(cherry picked from commit 9db03bd8cdad3c8804105cb5794ebad5e728f48f)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 3eaec0071c3ce1b7201e37859afe5bcb78d4f215)
Signed-off-by: Tibor Vass <tibor@docker.com>
Add note about host-dir in VOLUME
(cherry picked from commit f2fff9d913a8ab0436dd56033189a7c3713a59a2)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 8fd6547fc3eb67e7efa7efb007ae6a4494cd2bb3)
Signed-off-by: Tibor Vass <tibor@docker.com>
Adding more on -m and --memory
(cherry picked from commit c3fbca106552f2dadcb89510ff87945b50f36419)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit b4047a849bd3018f8a8eabf34613a4fca57f818e)
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 43239f62bedc4721d27744d21c122622988bb3ae)
Signed-off-by: Tibor Vass <tibor@docker.com>
This patch adds the untilRemoved option to the ContainerWait API which
allows the client to wait until the container is not only exited but
also removed.
This patch also adds some more CLI integration tests for waiting for a
created container and waiting with the new --until-removed flag.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Handle detach sequence in CLI
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Update Container Wait Conditions
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Apply container wait changes to API 1.30
The set of changes to the containerWait API missed the cut for the
Docker 17.05 release (API version 1.29). This patch bumps the version
checks to use 1.30 instead.
This patch also makes a minor update to a testfile which was added to
the builder/dockerfile package.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Remove wait changes from CLI
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Address minor nits on wait changes
- Changed the name of the tty Proxy wrapper to `escapeProxy`
- Removed the unnecessary Error() method on container.State
- Fixes a typo in comment (repeated word)
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Use router.WithCancel in the containerWait handler
This handler previously added this functionality manually but now uses
the existing wrapper which does it for us.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Add WaitCondition constants to api/types/container
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Address more ContainerWait review comments
- Update ContainerWait backend interface to not return pointer values
for container.StateStatus type.
- Updated container state's Wait() method comments to clarify that a
context MUST be used for cancelling the request, setting timeouts,
and to avoid goroutine leaks.
- Removed unnecessary buffering when making channels in the client's
ContainerWait methods.
- Renamed result and error channels in client's ContainerWait methods
to clarify that only a single result or error value would be sent
on the channel.
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Move container.WaitCondition type to separate file
... to avoid conflict with swagger-generated code for API response
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
Address more ContainerWait review comments
Docker-DCO-1.1-Signed-off-by: Josh Hawn <josh.hawn@docker.com> (github: jlhawn)
The --allow-nondistributable-artifacts daemon option specifies
registries to which foreign layers should be pushed. (By default,
foreign layers are not pushed to registries.)
Additionally, to make this option effective, foreign layers are now
pulled from the registry if possible, falling back to the URLs in the
image manifest otherwise.
This option is useful when pushing images containing foreign layers to a
registry on an air-gapped network so hosts on that network can pull the
images without connecting to another server.
Signed-off-by: Noah Treuhaft <noah.treuhaft@docker.com>
Allows for a plugin type that can be used to scrape metrics.
This is useful because metrics are not neccessarily at a standard
location... `--metrics-addr` must be set, and must currently be a TCP
socket.
Even if metrics are done via a unix socket, there's no guarentee where
the socket may be located on the system, making bind-mounting such a
socket into a container difficult (and racey, failure-prone on daemon
restart).
Metrics plugins side-step this issue by always listening on a unix
socket and then bind-mounting that into a known path in the plugin
container.
Note there has been similar work in the past (and ultimately punted at
the time) for consistent access to the Docker API from within a
container.
Why not add metrics to the Docker API and just provide a plugin with
access to the Docker API? Certainly this can be useful, but gives a lot
of control/access to a plugin that may only need the metrics. We can
look at supporting API plugins separately for this reason.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Starting with this commit, integration tests should no longer rely on
the docker cli, they should be API tests instead. For the existing tests
the scripts will use a frozen version of the docker cli with a
DOCKER_API_VERSION frozen to 1.30, which should ensure that the CI remains
green at all times.
To help contributors develop and test manually with a modified docker
cli, this commit also adds a DOCKER_CLI_PATH environment variable to the
Makefile. This allows to set the path of a custom cli that will be
available inside the development container and used to run the
integration tests.
Signed-off-by: Arnaud Porterie (icecrime) <arnaud.porterie@docker.com>
Signed-off-by: Tibor Vass <tibor@docker.com>
This is synonymous with `docker run --cidfile=FILE` and writes the digest of
the newly built image to the named file. This is intended to be used by build
systems which want to avoid tagging (perhaps because they are in CI or
otherwise want to avoid fixed names which can clash) by enabling e.g. Makefile
constructs like:
image.id: Dockerfile
docker build --iidfile=image.id .
do-some-more-stuff: image.id
do-stuff-with <image.id
Currently the only way to achieve this is to use `docker build -q` and capture
the stdout, but at the expense of losing the build output.
In non-silent mode (without `-q`) with API >= v1.29 the caller will now see a
`JSONMessage` with the `Aux` field containing a `types.BuildResult` in the
output stream for each image/layer produced during the build, with the final
one being the end product. Having all of the intermediate images might be
interesting in some cases.
In silent mode (with `-q`) there is no change, on success the only output will
be the resulting image digest as it was previosuly.
There was no wrapper to just output an Aux section without enclosing it in a
Progress, so add one here.
Added some tests to integration cli tests.
Signed-off-by: Ian Campbell <ian.campbell@docker.com>
Instead of forcing users to manually configure a block device to use
with devmapper, this gives the user the option to let the devmapper
driver configure a device for them.
Adds several new options to the devmapper storage-opts:
- dm.directlvm_device="" - path to the block device to configure for
direct-lvm
- dm.thinp_percent=95 - sets the percentage of space to use for
storage from the passed in block device
- dm.thinp_metapercent=1 - sets the percentage of space to for metadata
storage from the passed in block device
- dm.thinp_autoextend_threshold=80 - sets the threshold for when `lvm`
should automatically extend the thin pool as a percentage of the total
storage space
- dm.thinp_autoextend_percent=20 - sets the percentage to increase the
thin pool by when an autoextend is triggered.
Defaults are taken from
[here](https://docs.docker.com/engine/userguide/storagedriver/device-mapper-driver/#/configure-direct-lvm-mode-for-production)
The only option that is required is `dm.directlvm_device` for docker to
set everything up.
Changes to these settings are not currently supported and will error
out.
Future work could support allowing changes to these values.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
The daemon config for defaulting to no-new-privileges for containers was
added in d7fda019bb7e24f42f8ae1ddecb3fd52df3c48bf, but somehow we
managed to omit the flag itself, but also documented the flag.
This just adds the actual flag.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
added some clarification around why attach can appear hung to some. issue #1456 on docs
Signed-off-by: gary schaetz <gary@schaetzkc.com>
Updated the documentation to reflect what happens when you use a fragment in
the docker build url parameter.
Signed-off-by: Gary Schaetz <gary@schaetzkc.com>
added markup for commands
Signed-off-by: Gary Schaetz <gary@schaetzkc.com>
This new flag will allow the configuration of an interface that
can be used for data path traffic to be isolated from control
plane traffic. This flag is simply percolated down to libnetwork
and will be used by all the global scope drivers (today overlay)
Negative test added for invalid flag arguments
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
This does some minor fix-ups in the CLI reference
for "history", and copies the formattting section to
the man-pages.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
Adds to history documentation for --format
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
Adds MarshalJSON to historyContext for {{json .}} format
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
Adds back the --human option to history command
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
Cleans up formatter around --human option for history, Adds integration test for --format option of history
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
Adds test for history formatter checking full table results, Runs go fmt on touched files
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
Fixes lint errors in formatter/history
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
Runs go fmt on cli/command/formatter/history.go
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
sRemoves integration test for --format option of history
Merges Created and CreatedSince in docker history formatter, Updates docs and tests
Simplified the docs on how to set environment variables in a
container. Makes it clear that you have three options, and how
to use them.
Signed-off-by: Joao Fernandes <joao.fernandes@docker.com>
Also fixed some examples of using `docker build` to clarify that the
positional argument is a directory, not a file.
Also fixed some terminology. Dockerfiles contain instructions, not directives or
commands.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
If no fields related to an update config or restart policy are
specified, these structs should not be created as part of the service,
to avoid hardcoding the current defaults.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Service logs API is now stable. Service logs now support all features,
except retrieving details provided to the log driver.
Signed-off-by: Drew Erny <drew.erny@docker.com>
This allows graphdrivers to declare that they can reproduce the original
diff stream for a layer. If they do so, the layer store will not use
tar-split processing, but will still verify the digest on layer export.
This makes it easier to experiment with non-default diff formats.
Signed-off-by: Alfred Landrum <alfred.landrum@docker.com>
[17.04.x] deprecation and changelog updates
(cherry picked from commit f15f5937514c386ace40a43441dddc28337ca12d)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Logging plugins use the same HTTP interface as other plugins for basic
command operations meanwhile actual logging operations are handled (on
Unix) via a fifo.
The plugin interface looks like so:
```go
type loggingPlugin interface {
StartLogging(fifoPath string, loggingContext Context) error
StopLogging(fifoPath)
```
This means a plugin must implement `LoggingDriver.StartLogging` and
`LoggingDriver.StopLogging` endpoints and be able to consume the passed
in fifo.
Logs are sent via stream encoder to the fifo encoded with protobuf.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix tries to address the issue raised in 31032 where it was
not possible to specify `--cpus` for `docker update`.
This fix adds `--cpus` support for `docker update`. In case both
`--cpus` and `--cpu-period/--cpu-quota` have been specified,
an error will be returned.
Related docs has been updated.
Integration tests have been added.
This fix fixes 31032.
This fix is related to 27921, 27958.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Resolve networks IDs on the client side.
Avoid filling in deprecated Spec.Networks field.
Sort networks in the TaskSpec for update stability.
Add an integration test for changing service networks.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This parameter controls the order of operations when rolling out an
update task. Either the old task is stopped before starting the new one,
or the new task is started first, and the running tasks will briefly
overlap.
This commit adds Rollout to the API, and --update-order / --rollback-order
flags to the CLI.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This commit adds a hidden placeholder of `.Self` for
`docker node ls --format` so that if the node is the same
as the current docker daemon, then a `*` is outputed.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the comment https://github.com/docker/docker/pull/30376#discussion_r97465334
where it was not possible to specify `--format` for `docker node ls`. The `--format` flag
is a quite useful flag that could be used in many places such as completion.
This fix implements `--format` for `docker node ls` and add `nodesFormat` in config.json
so that it is possible to specify the output when `docker node ls` is invoked.
Related documentations have been updated.
A set of unit tests have been added.
This fix is related to #30376.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is related to 30232 wherw `docker service ls`
does not show `PORTS` information like `docker service ps`.
This fix adds `PORTS` fields for services that publish
ports in ingress mode.
Additional unit tests cases have been updated.
This fix is related to 30232.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Change "service create" and "service update" to wait until the creation
or update finishes, when --detach=false is specified. Show progress bars
for the overall operation and for each individual task (when there are a
small enough number of tasks), unless "-q" / "--quiet" is specified.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Updated legacy_plugins.md to include BeeGFS plugin
(cherry picked from commit d0057bd12dae5276b83e931e9e9ea185c58486a2)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adrian Plata
Justyn Temme
Sebastiaan van Stijn
Silvin Lubecki
Lukas Heeren
Comical DERSKEAL
Brandon Mitchell
Michael Irwin
Daniel Artine
Jose J. Escobar
Odin Ugedal
Forest Johnson
Daniel Cassidy
Sebastiaan van Stijn
Bret Fisher
Andrew Hsu
Nick Adcock
leonGravel
Sunny
Tibor Vass
Stefan Scherer
Tonis Tiigi
Silvin Lubecki
Ian Campbell
Olli Janatuinen
Craig Wilhite
stevejr
Ben Creasy
Michael Käufl
Ryan Wilson-Perkin
Simon Ferquel
Stefan Scherer
zhoulin xie
Akihiro Suda
Vincent Demeester
Frederic Hemberger
Anne Henmi
Harald Albers
Aleksa Sarai
zhangyue
Nir Soffer
selansen
Brian Goff
Scott Brenner
Thomas Riccardi
Alex Mayer
John Howard
Rui Cao
Lihua Tang
Anda Xu
mmacy
wyckster
Peter Kehl
Vimal Raghubir
Eli Uriegas
taiji-tech
Ying Li
wanglei
Ioan Eugen Stan
Nico Stapelbroek
Henry N
Per Lundberg
Anusha Ragunathan
Vincent Demeester
Joao Fernandes
Bogdan Anton
Preston Cowley
David Beitey
Victor Vieux
Lydell Manganti
Daniel Nephin
Alexander Ryabov
Misty Stanley-Jones
Sungwon Han
WTFKr0
Christy Perez
Daniel Nephin
Kat
apkd
T K Sourabh
Lachlan Cooper
Nicolas De Loof
Harald Albers
Riyaz Faizullabhoy
Renaud Gaubert
doncicuto
Skip
Rodolfo Ortiz
squeegels
Jamie Hannaford
Patrick Lang
Mikhail Vasin
Abdur Rehman
Kyle Spiers
Jesse Adametz
BastianHofmann
John Mulhausen
djgoosen
Misty Stanley-Jones
Phil Estes
Frieder Bluemle
Allen Sun
Tycho Andersen
Marc Bihlmaier
Carlo Mion
Tobias Gesellchen
Julien Maitrehenry
Rubens Figueiredo
Boaz Shuster
Marco Mariani
Christophe Vidal
Jimmy Leger
bryfry
Luka Hartwig
Kir Kolyshkin
Jonathan Lee
zebrilee
Hernan Garcia
allencloud
yuexiao-wang
Valentin Lorentz
Dhawal Yogesh Bhanushali
Slava Semushin
Doug Davis
Tibor Vass
Alessandro Boch
Josh Hawn
Noah Treuhaft
Aaron Lehmann
John V. Martinez
Arnaud Porterie (icecrime)
Ian Campbell
Gary Schaetz
MichaelSpets
David Sheets
Denis Defreyne
Michael Friis
Dong Chen
Flavio Crisciani
Julien Kassar
Antonio Murdaca
Alvin Deng
Jeremy Chambers
Yong Tang
Drew Erny
Alfred Landrum
Arash Deshmeh
Mike Casas
Elias Faxö
Karthik Nayak
徐俊杰
JimGalasyn