There's no need for `case=[xxx]` in table tests, Go does a good job of
formatting the test output and we're just adding the same information
for every test output line.
Previously:
```console
$ go test -count=1 -v -run=TestPromptForConfirmation ./cli/command
=== RUN TestPromptForConfirmation
=== RUN TestPromptForConfirmation/case=SIGINT
=== RUN TestPromptForConfirmation/case=no
=== RUN TestPromptForConfirmation/case=yes
=== RUN TestPromptForConfirmation/case=any
=== RUN TestPromptForConfirmation/case=with_space
=== RUN TestPromptForConfirmation/case=reader_closed
--- PASS: TestPromptForConfirmation (0.00s)
--- PASS: TestPromptForConfirmation/case=SIGINT (0.00s)
--- PASS: TestPromptForConfirmation/case=no (0.00s)
--- PASS: TestPromptForConfirmation/case=yes (0.00s)
--- PASS: TestPromptForConfirmation/case=any (0.00s)
--- PASS: TestPromptForConfirmation/case=with_space (0.00s)
--- PASS: TestPromptForConfirmation/case=reader_closed (0.00s)
PASS
ok github.com/docker/cli/cli/command 0.013s
```
After:
```console
go test -count=1 -v -run=TestPromptForConfirmation ./cli/command
=== RUN TestPromptForConfirmation
=== RUN TestPromptForConfirmation/SIGINT
=== RUN TestPromptForConfirmation/no
=== RUN TestPromptForConfirmation/yes
=== RUN TestPromptForConfirmation/any
=== RUN TestPromptForConfirmation/with_space
=== RUN TestPromptForConfirmation/reader_closed
--- PASS: TestPromptForConfirmation (0.00s)
--- PASS: TestPromptForConfirmation/SIGINT (0.00s)
--- PASS: TestPromptForConfirmation/no (0.00s)
--- PASS: TestPromptForConfirmation/yes (0.00s)
--- PASS: TestPromptForConfirmation/any (0.00s)
--- PASS: TestPromptForConfirmation/with_space (0.00s)
--- PASS: TestPromptForConfirmation/reader_closed (0.00s)
PASS
ok github.com/docker/cli/cli/command 0.009s
```
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
Instead of clearing the whole screen and then writing the new stats,
we now write the new stats on top of the old text, and then clear
the remaining text.
This is a more efficient way to update the stats, as it avoids the
flickering that happens when the screen is cleared and rewritten.
Signed-off-by: Giedrius Jonikas <giedriusj1@gmail.com>
make shell
make -C ./internal/gocompat/
GO111MODULE=on go test -v
# github.com/docker/cli/cli/command/container
../../cli/command/container/completion.go:37:28: implicit function instantiation requires go1.18 or later (-lang was set to go1.16; check go.mod)
../../cli/command/container/completion.go:82:25: implicit function instantiation requires go1.18 or later (-lang was set to go1.16; check go.mod)
../../cli/command/container/completion.go:92:27: implicit function instantiation requires go1.18 or later (-lang was set to go1.16; check go.mod)
FAIL gocompat [build failed]
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit 4a7b04d412 configured golangci-lint
to use go1.23 semantics, which enabled the copyloopvar linter.
go1.22 now creates a copy of variables when assigned in a loop; make sure we
don't have files that may downgrade semantics to go1.21 in case that also means
disabling that feature; https://go.dev/ref/spec#Go_1.22
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.22 and up now produce a unique variable in loops, tehrefore no longer
requiring to capture the variable manually;
cli/command/service/update.go:1061:3: The copy of the 'for' variable "entry" can be deleted (Go 1.22+) (copyloopvar)
entry := entry
^
cli/command/service/update.go:1089:4: The copy of the 'for' variable "port" can be deleted (Go 1.22+) (copyloopvar)
port := port
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.22 and up now produce a unique variable in loops, tehrefore no longer
requiring to capture the variable manually;
cli/command/container/opts.go:765:3: The copy of the 'for' variable "n" can be deleted (Go 1.22+) (copyloopvar)
n := n
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.22 and up now produce a unique variable in loops, tehrefore no longer
requiring to capture the variable manually;
cli/command/image/tree.go:59:4: The copy of the 'for' variable "im" can be deleted (Go 1.22+) (copyloopvar)
im := im
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.22 and up now produce a unique variable in loops, tehrefore no longer
requiring to capture the variable manually;
service/logs/parse_logs_test.go:50:3: The copy of the 'for' variable "tc" can be deleted (Go 1.22+) (copyloopvar)
tc := tc
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This change reduces the flickering of the terminal when
running `docker stats` by buffering the formatted stats
text and printing it in one write.
Should also consume less CPU as we now only have to issue
a single syscall to write the stats text to the terminal.
Signed-off-by: Giedrius Jonikas <giedriusj1@gmail.com>
remove a client-side warning about volume drivers combined with "mounts"
in favor of producing the warning on the daemon side.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The docker inspect command did not inspect configs. This patch adds support for
it, and while at it, also sorts the list of objects in runInspect.
Before this patch:
docker config create myconfig ./codecov.yml
danpeyh8qzb30vgdj9fr665l1
docker inspect --format='{{.ID}}' myconfig
[]
Error: No such object: myconfig
docker inspect --format='{{.ID}}' --type=config myconfig
"config" is not a valid value for --type
With this patch:
docker inspect --format='{{.ID}}' myconfig
danpeyh8qzb30vgdj9fr665l1
docker inspect --format='{{.ID}}' --type=config myconfig
danpeyh8qzb30vgdj9fr665l1
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This message resulted in code-lines that were too long; move it to a
const together with the other hint. While at it, also suppress unhandled
error, and touch-up the code-comment.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Deprecation comments must have an empty line before them, otherwise tools
and linters may not recognise them. While fixing this, also updated the
reference to PromptUserForCredentials to be a docs-link to make it clickable.
Updates 6e4818e7d6.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If restoring the terminal state fails, "echo" no longer works, which means
that anything the user types is no longer shown. The login itself may already
have succeeded, so we should not fail the command, but it's good to inform
the user that this happened, which may give them a clue why things no longer
work as they expect them to work.
With this patch:
docker login -u yourname
Password:
Error: failed to restore terminal state to echo input: something bad happened
Login Succeeded
We should consider printing instructions how to restore this manually (other
than restarting the shell). e.g., 'run stty echo' when in a Linux or macOS shell,
but PowerShell and CMD.exe may need different instructions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
we don't support empty passwords; when prompting the user for a password,
we already trim the result, but we didn't do the same for a password that's
passed through stdin or through the `-p` / `--password` flag.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- move trimming defaultUsername inside the if-branch, as it's the only
location where the result of the trimmed username is use.
- do the reverse for trimming argUser, because the result of trimming
argUser is used outside of the if-branch (not just for the condition).
putting it inside the condition makes it easy to assume the result is
only used locally.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
move the "post" check for username being empty inside the branch
that's handling the username, as it's the only branch where username
is mutated after checking if it's empty.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
remove isDefaultRegistry and inline it where it's used; the code-comment
already outlines what we're looking for, so the intermediate var didn't
add much currently.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function has multiple conditional branches, which makes it harder
to see at a glance whether authConfig may be partially populated. This
patch instead returns a fresh instance for error returns to prevent any
confusion.
It also removes the named output variables, as they're now no longer used,
and the returned types should already be descriptive enough to understand
what's returned.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This command was using a custom "multi-error" implementation, but it
had some limitations, and the formatting wasn't great.
This patch replaces it with Go's errors.Join.
Before:
docker plugin remove one two three
Error response from daemon: plugin "one" not found, Error response from daemon: plugin "two" not found, Error response from daemon: plugin "three" not found
After:
docker plugin remove one two three
Error response from daemon: plugin "one" not found
Error response from daemon: plugin "two" not found
Error response from daemon: plugin "three" not found
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Prevent some tests from failing when running from a pre-compiled
testbinary, and discard output to make the output less noisy.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Laura Brehm
Sebastiaan van Stijn
Giedrius Jonikas
Sebastiaan van Stijn
Harald Albers