support for kubernetes contexts was deprecated in docker 20.10 through
b639ea8b89, 0793f96394,
and 1d37fb3027, and removed altoghether in
23.0 through 193ede9b12.
This patch removes the remaining stubs for options that were deprecated
and no longer used.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
if a context is set (e.g. through DOCKER_CONTEXT or the CLI config file), but
wasn't found, then a "stub" context is added, including an error message that
the context doesn't exist.
DOCKER_CONTEXT=nosuchcontext docker context ls
NAME DESCRIPTION DOCKER ENDPOINT ERROR
default Current DOCKER_HOST based configuration unix:///var/run/docker.sock
nosuchcontext * context "nosuchcontext": context not found: …
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This updates `docker context ls` to:
- not abort listing contexts when failing one (or more) contexts
- instead, adding an ERROR column to inform the user there was
an issue loading the context.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "docker context show" command is intended to show the currently configured
context. While the context that's configured may not be valid (e.g., in case
an environment variable was set to configure the context, or if the context
was removed from the filesystem), we should still be able to _show_ the
context.
This patch removes the context validation, and instead only shows the context.
This can help in cases where the context is used to (e.g.) set the command-
prompt, but the user removed the context. With this change, the context name
can still be shown, but commands that _require_ the context will still fail.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Looks like the linter uses an explicit -lang, which (for go1.19)
results in some additional formatting for octal values.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The package defined various special errors; these errors existed for two reasons;
- being able to distinguish "not found" errors from other errors (as "not found"
errors can be ignored in various cases).
- to be able to update the context _name_ in the error message after the error
was created. This was needed in cases where the name was not available at the
location where the error was produced (e.g. only the "id" was present), and
the helpers to detect "not found" errors did not support wrapped errors (so
wrapping the error with a "name" could break logic); a `setContextName` interface
and corresponding `patchErrContextName()` utility was created for this (which
was a "creative", but not very standard approach).
This patch:
- Removes the special error-types, replacing them with errdefs definitions (which
is a more common approach in our code-base to detect error types / classes).
- Removes the internal utilities for error-handling, and deprecates the exported
utilities (to allow external consumers to adjust their code).
- Some errors have been enriched with detailed information (which may be useful
for debugging / problem solving).
- Note that in some cases, `patchErrContextName()` was called, but the code
producing the error would never return a `setContextName` error, so would
never update the error message.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this change, running `docker context rm --force` would fail if the context
did not exist. This behavior was different from other commands, which allowed
ignoring non-existing objects.
For example; when trying to remove a non-existing volume, the command would
fail without "force":
```bash
docker volume rm nosuchvolume
Error: No such volume: nosuchvolume
echo $?
1
```
But using the `-f` / `--force` option would make the command complete successfully
(the error itself is still printed for informational purposes);
```bash
docker volume rm -f nosuchvolume
nosuchvolume
echo $?
0
```
With this patch, `docker context rm` behaves the same:
```bash
docker context rm nosuchcontext
context "nosuchcontext" does not exist
echo $?
1
```
```bash
docker context rm -f nosuchcontext
nosuchcontext
echo $?
0
```
This patch also simplifies how we check if the context exists; previously we
would try to read the context's metadata; this could fail if a context was
corrupted, or if an empty directory was present. This patch now only checks
if the directory exists, without first validating the context's data.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Avoid updating the config-file if nothing changed. This also prevents creating
the file and config-directory if the default is used and no config-file existed
yet.
`config.Save()` performs various steps (creating the directory, updating
or copying permissions, etc etc), which are not needed if the defaults are
used; a445d97c25/cli/config/configfile/file.go (L135-L176)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This code was handling validation and parsing, only to discard the
results if it was the default context.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Prevent completion on "create" subcommands to prevent them
from completing with local filenames
- Add completion for "docker image save"
- Add completion for "docker image tag"
- Disable completion for "docker login"
- Exclude "paused" containers for "docker container attach" and
"docker container exec"
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
It's slightly more verbose, but helps finding the purpose of each
of the environment variables. In tests, I kept the fixed strings.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this change all `inspect` commands will output a compact JSON
representation of the elements, the default format (indented JSON) stays the
same.
Signed-off-by: Djordje Lukic <djordje.lukic@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
including all the directives and a link to the documentation.
Signed-off-by: Silvin Lubecki <silvin.lubecki@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Remove various tests and utilities related to testing kubernetes support
Also removing the Kubernetes and DefaultStackOrchestrator from CreateOptions
and UpdateOptions, instead updating the flags to not be bound to a variable.
This might break some consumers of those options, but given that they've become
non-functional, that's probably ok (otherwise they may ignore the deprecation
warning and end up with non-functional code).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Removes the --kubeconfig flag, and the corresponding ExportOptions.Kubeconfig,
as well as special handling for kubeconfig export, as it's no longer used.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Some tests were using domain names that were intended to be "fake", but are
actually registered domain names (such as mycorp.com).
Even though we were not actually making connections to these domains, it's
better to use domains that are designated for testing/examples in RFC2606:
https://tools.ietf.org/html/rfc2606
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The tabwriter was configured to have a min-width for columns of 20 positions.
This seemed quite wide, and caused smaller columns to be printed with a large
gap between.
Before:
docker container stats
CONTAINER ID NAME CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
29184b3ae391 amazing_shirley 0.00% 800KiB / 1.944GiB 0.04% 1.44kB / 0B 0B / 0B 1
403c101bad56 agitated_swartz 0.15% 34.31MiB / 1.944GiB 1.72% 10.2MB / 206kB 0B / 0B 51
0dc4b7f6c6be container2 0.00% 1.012MiB / 1.944GiB 0.05% 12.9kB / 0B 0B / 0B 5
2d99abcc6f62 container99 0.00% 972KiB / 1.944GiB 0.05% 13kB / 0B 0B / 0B 5
9f9aa90173ac foo 0.00% 820KiB / 1.944GiB 0.04% 13kB / 0B 0B / 0B 5
docker container ls
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
29184b3ae391 docker-cli-dev "ash" 4 hours ago Up 4 hours amazing_shirley
403c101bad56 docker-dev:master "hack/dind bash" 3 days ago Up 3 days agitated_swartz
0dc4b7f6c6be nginx:alpine "/docker-entrypoint.…" 4 days ago Up 4 days 80/tcp container2
2d99abcc6f62 nginx:alpine "/docker-entrypoint.…" 4 days ago Up 4 days 80/tcp container99
9f9aa90173ac nginx:alpine "/docker-entrypoint.…" 4 days ago Up 4 days 80/tcp foo
docker image ls
REPOSITORY TAG IMAGE ID CREATED SIZE
docker-cli-dev latest 5f603caa04aa 4 hours ago 610MB
docker-cli-native latest 9dd29f8d387b 4 hours ago 519MB
docker-dev master 8132bf7a199e 3 days ago 2.02GB
docker-dev improve-build-errors 69e208994b3f 11 days ago 2.01GB
docker-dev refactor-idtools 69e208994b3f 11 days ago 2.01GB
After:
docker container stats
CONTAINER ID NAME CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
29184b3ae391 amazing_shirley 0.14% 5.703MiB / 1.944GiB 0.29% 1.44kB / 0B 0B / 0B 10
403c101bad56 agitated_swartz 0.15% 56.97MiB / 1.944GiB 2.86% 10.2MB / 206kB 0B / 0B 51
0dc4b7f6c6be container2 0.00% 1016KiB / 1.944GiB 0.05% 12.9kB / 0B 0B / 0B 5
2d99abcc6f62 container99 0.00% 956KiB / 1.944GiB 0.05% 13kB / 0B 0B / 0B 5
9f9aa90173ac foo 0.00% 980KiB / 1.944GiB 0.05% 13kB / 0B 0B / 0B 5
docker container ls
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
29184b3ae391 docker-cli-dev "ash" 12 minutes ago Up 12 minutes amazing_shirley
403c101bad56 docker-dev:master "hack/dind bash" 3 days ago Up 3 days agitated_swartz
0dc4b7f6c6be nginx:alpine "/docker-entrypoint.…" 4 days ago Up 4 days 80/tcp container2
2d99abcc6f62 nginx:alpine "/docker-entrypoint.…" 4 days ago Up 4 days 80/tcp container99
9f9aa90173ac nginx:alpine "/docker-entrypoint.…" 4 days ago Up 4 days 80/tcp foo
docker image ls
REPOSITORY TAG IMAGE ID CREATED SIZE
docker-cli-dev latest 5f603caa04aa 4 hours ago 610MB
docker-cli-native latest 9dd29f8d387b 4 hours ago 519MB
docker-dev master 8132bf7a199e 3 days ago 2.02GB
docker-dev improve-build-errors 69e208994b3f 11 days ago 2.01GB
docker-dev refactor-idtools 69e208994b3f 11 days ago 2.01GB
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The vanity domain is down, and the project has moved
to a new location.
vendor check started failing because of this:
Collecting initial packages
Download dependencies
unrecognized import path "vbom.ml/util" (https fetch: Get https://vbom.ml/util?go-get=1: dial tcp: lookup vbom.ml on 169.254.169.254:53: no such host)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
```
cli/command/context/create_test.go:270:31: Using the variable on range scope `c` in function literal (scopelint)
Name: c.name,
^
cli/command/context/create_test.go:271:31: Using the variable on range scope `c` in function literal (scopelint)
Description: c.description,
^
cli/command/context/create_test.go:272:31: Using the variable on range scope `c` in function literal (scopelint)
DefaultStackOrchestrator: c.orchestrator,
cli/command/context/create_test.go:346:31: Using the variable on range scope `c` in function literal (scopelint)
Name: c.name,
^
cli/command/context/create_test.go:347:31: Using the variable on range scope `c` in function literal (scopelint)
Description: c.description,
^
cli/command/context/create_test.go:348:31: Using the variable on range scope `c` in function literal (scopelint)
DefaultStackOrchestrator: c.orchestrator,
^
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adds capabilities to import a .zip file with importZip.
Detects the content type of source by checking bytes & DetectContentType.
Adds LimitedReader reader, a fork of io.LimitedReader,
was needed for better error messaging instead of just getting back EOF.
We are using limited reader to avoid very big files causing memory issues.
Adds a new file size limit for context imports,
this limit is used for the main file for .zip & .tar and individual compressed
files for .zip.
Added TestImportZip that will check the import content type
Then will assert no err on Importing .zip file
Signed-off-by: Goksu Toprak <goksu.toprak@docker.com>
Refactor `RunCreate` slightly so that all three paths always produce the same
output, namely the name of the new context of `stdout` (for scripting) and the
success log message on `stderr`.
Validate by extending the existing unit tests to always check the output is as
expected.
Signed-off-by: Ian Campbell <ijc@docker.com>
This is to make it easier to implement support for exporting contexts in
3rd party code, or to create mocks in tests.
2 exemples where it simplify things:
- docker-app desktop-specific context decorator (which rewrites parts of
the docker context to simplify UX when using on Docker Desktop contexts)
- ucp for including a context in the connection bundle
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
Sebastiaan van Stijn
Sebastiaan van Stijn
CrazyMax
Nick Santos
Nicolas De Loof
Djordje Lukic
Silvin Lubecki
Mathieu Champlon
Chris Crone
Goksu Toprak
Ian Campbell
Simon Ferquel