Create an easier to digest introduction to container networking,
move the bulk of information to the networking overview page.
Signed-off-by: David Karlsson <35727626+dvdksn@users.noreply.github.com>
commit 304c100ed2 updated the deprecation
status for these options, but forgot to update the status in the table.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit 5d6612798a updated the deprecation
status for devicemapper to "removed", but forgot to update the status
in the table.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fixes#4648
Make it easier to specify IPv6 addresses in the '--add-host' option by
permitting 'host=ip' in addition to 'host:ip', and allowing square
brackets around the address.
For example:
--add-host=my-hostname:127.0.0.1
--add-host=my-hostname:::1
--add-host=my-hostname=::1
--add-host=my-hostname:[::1]
To avoid compatibility problems, the CLI will replace an '=' separator
with ':', and strip brackets, before sending the request to the API.
Signed-off-by: Rob Murray <rob.murray@docker.com>
"By default" implies that this is something which could be
disabled for an individual `docker exec` call. This doesn't seem
to be the case, so removing the "by default" part would make
these docs clearer to me.
Signed-off-by: Per Lundberg <per.lundberg@hibox.tv>
- updates fc6976db45
- updates 74bace156c
Commit fc6976db45 introduced support for the
`bind-recursive` option on `--mount`, and deprecated the `bind-nonrecursive`
option. Unlike `bind-nonrecursive` boolean, the `bind-recursive` option
accepts a string value with multiple options.
For convenience, the `bind-recursive` option also was made to accept boolean
values (true/false, 1/0). However, as the option works as the _reverse_ of
`bind-nonrecursive` (`bind-nonrecursive=true` === `bind-recursive=false`),
the new option won't be a "drop-in" replacement, and having more options
to choose from may only be adding more complexity / cognitive overload.
This patch removes support for boolean values; if we see a need to add
support for boolean values in future, it would be trivial to add back this
functionality.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This attempts to make it clearer that the --cgroup-parent option is only used
for the containers used during build. Instead of mentioning "build container",
I opted for using "RUN instructions" (to match the --network description),
although this may not be ideal (as it assumes the "Dockerfile" front-end, which
of course may not be the case).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
In previous versions of the Docker API, `system prune --volumes` and `volume prune`
would remove all dangling volumes. With API v1.42, this was changed so that only
anonymous volumes would be removed unless the all filter was specified.
Some of the docs were updated in #4218, however, there were a couple of places
left that didn't make the anonymous vs named volumes distinction clear.
This replaces #4079, which was bitrotted by #4218. See also #4028.
Closes#4079.
Signed-off-by: Ed Morley <501702+edmorley@users.noreply.github.com>
The IsAutomated field is being deprecated by Docker Hub's search API and
will always be "false" in future.
This patch:
- Deprecates the field and the related "is-automated" filter
- Removes the "AUTOMATED" column from the default output of "docker search"
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The flag-set that was returned is a pointer to the command's Flags(), which
is in itself passed by reference (as it is modified / set up).
This patch removes the flags return, to prevent assuming it's different than
the command's flags.
While SetupRootCommand is exported, a search showed that it's only used internally,
so changing the signature should not be a problem.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit c846428cb6 added proxies to the
example `daemon.json`, based on the implementation that was added in
427c7cc5f8.
However, a follow-up pull request changed the proxy-configuration in`daemon.json`
to nest the configuration in a "proxies" struct, and the documentation was
not updated accordingly; see:
101dafd049
This patch fixes the example.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit de8b696ed6 removed the patch
releases from the deprecation doc, but when we switched to the
SemVer(ish) format for v23.0, we accidentally added them back.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `~/.dockercfg` file was replaced by `~/.docker/config.json` in 2015
(github.com/docker/docker/commit/18c9b6c6455f116ae59cde8544413b3d7d294a5e).
Commit b83bc67136 (v23.0.0, but backported to
v20.10) added a warning if no "current" config file was found but a legacy
file was, and if the CLI would fall back to using the deprecated file.
Commit ee218fa89e removed support for the
legacy file, but kept a warning in place if a legacy file was in place,
and now ignored.
This patch removes the warning as well, fully deprecating the legacy
`~/.dockercfg` file.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `oom-score-adjust` option was added to prevent the daemon from being
OOM-killed before other processes. This option was mostly added as a
convenience, as running the daemon as a systemd unit was not yet common.
Having the daemon set its own limits is not best-practice, and something
better handled by the process-manager starting the daemon.
Docker v20.10 and newer no longer adjust the daemon's OOM score by default,
instead setting the OOM-score to the systemd unit (OOMScoreAdjust) that's
shipped with the packages.
Users currently depending on this feature are recommended to adjust the
daemon's OOM score using systemd or through other means, when starting
the daemon.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
For moby/moby PR 45025 (Docker v24, API v1.43).
`docker run --annotation foo=bar` is similar to `podman run --annotation foo=bar`,
however, unlike Podman, Docker implementation also accepts an annotation with an empty value.
(`docker run --annotation foo`)
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
The IndexServerAddress field was as part of the initial Windows implementation
of the engine. For legal reasons, Microsoft Windows (and thus Docker images
based on Windows) were not allowed to be distributed through non-Microsoft
infrastructure. As a temporary solution, a dedicated "registry-win-tp3.docker.io"
registry was created to serve Windows images.
Currently, this field always shows "https://index.docker.io/v1/", which is
confusing, because that address is not used for the registry (only for
authentication and "v1" search).
docker info
...
Registry: https://index.docker.io/v1/
Starting with b4ca1c7368, this field is also
no longer used during authentication, and a3d56e7d06
removed the (deprecated) ElectAuthServer() which was previously used to
query it.
Given that there's currently no practical use for this information, and
it only adds "noise" (and confusion), this patch removes it from the default
output.
For now, the field is (still) available for those that want to use it;
docker info --format '{{.IndexServerAddress}}'
https://index.docker.io/v1/
But it won't be printed by default.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
David Karlsson
Sebastiaan van Stijn
Sebastiaan van Stijn
robmry
TheRealGramdalf
Per Lundberg
Hugo Chastel
saurabh
Sam Thibault
Akihiro Suda
Ed Morley
Brian Goff
Zhiwei Liang
David Karlsson
A. Lester Buck III
Craig Osterhout
Chris Chinchilla