Keeping the current behavior for exec, i.e., inheriting
variables from main process. New variables will be added
to current ones. If there's already a variable with that
name it will be overwritten.
Example of usage: docker exec -it -e TERM=vt100 <container> top
Closes#24355.
Signed-off-by: Jonh Wendell <jonh.wendell@redhat.com>
This adds support for two enhancements to swarm service rolling updates:
- Failure thresholds: In Docker 1.12, a service update could be set up
to either pause or continue after a single failure occurs. This adds
an --update-max-failure-ratio flag that controls how many tasks need to
fail to update for the update as a whole to be considered a failure. A
counterpart flag, --update-monitor, controls how long to monitor each
task for a failure after starting it during the update.
- Rollback flag: service update --rollback reverts the service to its
previous version. If a service update encounters task failures, or
fails to function properly for some other reason, the user can roll back
the update.
SwarmKit also has the ability to roll back updates automatically after
hitting the failure thresholds, but we've decided not to expose this in
the Docker API/CLI for now, favoring a workflow where the decision to
roll back is always made by an admin. Depending on user feedback, we may
add a "rollback" option to --update-failure-action in the future.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
When sending a build context to a remote server it may be
(significantly) advantageous to compress the build context. This commit
adds support for gz compression when constructing a build context
using a command like "docker build --compress ."
Signed-off-by: Paul Kehrer <paul.l.kehrer@gmail.com>
New driver options:
- `splunk-gzip` - gzip compress all requests to Splunk HEC
(enabled by default)
- `splunk-gzip-level` - change compression level.
Messages are sent in batches by 1000, with frequency of 5 seconds.
Maximum buffer is 10,000 events. If HEC will not be available, Splunk
Logging Driver will keep retrying while it can hold messages in buffer.
Added unit tests for driver.
Signed-off-by: Denis Gladkikh <denis@gladkikh.email>
`--log-opt splunk-format=inline|json|raw` allows to change how logging
driver sends data to Splunk, where
`inline` - default value, format used before, message is injected as a
line in JSON payload
`json` - driver will try to parse each line as a JSON object and embed it
inside of the JSON payload
`raw` - driver will send Raw payload instead of JSON, tag and attributes
will be prefixed before the message
`--log-opt splunk-verify-connection=true|false` - allows to skip
verification for Splunk Url
Signed-off-by: Denis Gladkikh <denis@gladkikh.email>
Rather than conflict with the unexposed task model, change the names of
the object-oriented task display to `docker <object> ps`. The command
works identically to `docker service tasks`. This change is superficial.
This provides a more sensical docker experience while not trampling on
the task model that may be introduced as a top-level command at a later
date.
The following is an example of the display using `docker service ps`
with a service named `condescending_cori`:
```
$ docker service ps condescending_cori
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 13 minutes ago Running 6c6d232a5d0e
```
The following shows the output for the node on which the command is
running:
```console
$ docker node ps self
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
b1tpbi43k1ibevg2e94bmqo0s mad_kalam.1 mad_kalam apline Accepted 2 seconds ago Accepted 6c6d232a5d0e
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 12 minutes ago Running 6c6d232a5d0e
4x609m5o0qyn0kgpzvf0ad8x5 furious_davinci.1 furious_davinci redis Running 32 minutes ago Running 6c6d232a5d0e
```
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This changes the default behavior so that rolling updates will not
proceed once an updated task fails to start, or stops running during the
update. Users can use docker service inspect --pretty servicename to see
the update status, and if it pauses due to a failure, it will explain
that the update is paused, and show the task ID that caused it to pause.
It also shows the time since the update started.
A new --update-on-failure=(pause|continue) flag selects the
behavior. Pause means the update stops once a task fails, continue means
the old behavior of continuing the update anyway.
In the future this will be extended with additional behaviors like
automatic rollback, and flags controlling parameters like how many tasks
need to fail for the update to stop proceeding. This is a minimal
solution for 1.12.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Swarm join has been changed in f5e1f6f6880391a5a3399023cf93a3c48502e57d,
removing various options and the "node accept" command.
This removes the removed options from the completion
scripts.
NOTE: a new command ("docker swarm join-token") was
also added, but is not part of this commit.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The completion for the new `docker service`, `docker swarm` and
`docker node` command families were partly added in non-alphabetical
order.
Signed-off-by: Harald Albers <github@albersweb.de>
Make `--dispatcher-heartbeat-period` a duration in `docker swarm
update`, allowing to express the value as "5s", "1h", etc.
Signed-off-by: Arnaud Porterie (icecrime) <arnaud.porterie@docker.com>
Add support for two now filter on the `images` command : `before` and
`since`. They work the same as the one on the `ps` command but for
images.
$ docker images --filter before=myimage
# display all images older than myimage
$ docker images --filter since=myimage
# display all images younger than myimage
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
The filtering is made server-side, and the following filters are
supported:
* is-official (boolean)
* is-automated (boolean)
* has-stars (integer)
Signed-off-by: Fabrizio Soppelsa <fsoppelsa@mirantis.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This add a new filter to 'docker network ls'
to allow filtering by driver-name.
Contrary to "ID" and "name" filters, this
filter only supports an *exact* match.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch will allow users to specify namespace specific "kernel parameters"
for running inside of a container.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Completion of these options was not handled consistently.
Now all such options immediatly complete with =false appended.
Signed-off-by: Harald Albers <github@albersweb.de>
All other options we have use `=` as separator, labels,
log configurations, graph configurations and so on.
We should be consistent and use `=` for the security
options too.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This removes the email prompt when you use docker login, and also removes the ability to register via the docker cli. Docker login, will strictly be used for logging into a registry server.
Signed-off-by: Ken Cochrane <kencochrane@gmail.com>
The obscure `case "${words[$cword-2]}$prev=" in` idiom is no
longer used for key specific completions in options with map values.
The `__docker_map_key_of_current_option()` function does a much
better job.
Signed-off-by: Harald Albers <github@albersweb.de>
This is a refactoring in preparation of cleaning up the handling
of key specific subcompletions.
The new `__docker_map_key_of_current_option()` function will be used
instead of the `__docker_map_key_of_current_option()` idiom in the
following commit.
As this function is very specific, checks using it should be executed
before those checking for `$prev`.
This commit just moves the checks without any modification.
Signed-off-by: Harald Albers <github@albersweb.de>
The currently used idiom for handling key specific subcompletions
did not work here: behind `docker event -f type=network `, the completion
of networks triggered. The expected behaviour is not to complete
anything here.
In order to limit the scope of the corresponding PR, the new idiom is
currently only used in `docker events --filter`.
Signed-off-by: Harald Albers <github@albersweb.de>
The new names make it easier to distinguish between helper functions and
functions that actually perform completion by modifying the global COMPOPT
variable.
Signed-off-by: Harald Albers <github@albersweb.de>
Harald Albers
Jonh Wendell
Aaron Lehmann
Carlos Alexandro Becker
Paul Kehrer
Vincent Demeester
Akihiro Suda
Denis Gladkikh
Yong Tang
timfeirg
Josh Horwitz
Stephen J Day
Sebastiaan van Stijn
Mike Goelzer
Arnaud Porterie (icecrime)
Kenfe-Mickael Laventure
Dmitry Smirnov
Fabrizio Soppelsa
Mrunal Patel
Damien Nadé
Dan Walsh
David Calavera
Jessica Frazelle
Mike Danese
Ken Cochrane
Aidan Hobson Sayers
Tianon Gravi
Vincent Woo
Tibor Vass
Ma Shimiao