- More strict on orchestrator flag
- Make orchestrator flag more explicit as experimental
- Add experimentalCLI annotation on kubernetes flags
- Better kubeconfig error message
- Prefix service name with stackname in ps and services stack subcommands
- Fix yaml documentation
- Fix code coverage ignoring generated code
Signed-off-by: Silvin Lubecki <silvin.lubecki@docker.com>
* Refactor tests on version and kubernetes switch
* Fix rebase errors
* Refactor for gocyclo linter
Signed-off-by: Silvin Lubecki <silvin.lubecki@docker.com>
- Define command and subcommands only once
- Use annotations for k8s or swarm specific flags or subcommands
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
- Add support for kubernetes for docker stack command
- Update to go 1.9
- Add kubernetes to vendors
- Print orchestrator in docker version command
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Signed-off-by: Silvin Lubecki <silvin.lubecki@docker.com>
Allow to mark some commands and flags experimental on cli (i.e. not
depending to the state of the daemon). This will allow more flexibility
on experimentation with the cli.
Marking `docker trust` as cli experimental as it is documented so.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
If container wait has failed, show an error from the engine
and return an appropriate exit code.
This requires engine changes from https://github.com/moby/moby/pull/34999
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
The Server section of version output is now composed of an Engine
component and potentially more, based on what the /version endpoint
returns.
Signed-off-by: Tibor Vass <tibor@docker.com>
Signed-off-by: John Howard <jhoward@microsoft.com>
This is the CLI updates for the document discussed in https://github.com/moby/moby/issues/34617
to support Linux Containers on Windows. It adds --platform= as CLI flags to the four
commands listed above. Import still to be completed (needs daemon changes).
Fix 19 typos, grammatical errors and duplicated words.
These fixes have minimal impact on the code as these are either in the
doc files or in comments inside the code files.
Signed-off-by: Abdur Rehman <abdur_rehman@mentor.com>
Extra hosts (`extra_hosts` in compose-file, or `--hosts` in services) adds
custom host/ip mappings to the container's `/etc/hosts`.
The current implementation used a `map[string]string{}` as intermediate
storage, and sorted the results alphabetically when converting to a service-spec.
As a result, duplicate hosts were removed, and order of host/ip mappings was not
preserved (in case the compose-file used a list instead of a map).
According to the **host.conf(5)** man page (http://man7.org/linux/man-pages/man5/host.conf.5.html)
multi Valid values are on and off. If set to on, the resolver
library will return all valid addresses for a host that
appears in the /etc/hosts file, instead of only the first.
This is off by default, as it may cause a substantial
performance loss at sites with large hosts files.
Multiple entries for a host are allowed, and even required for some situations,
for example, to add mappings for IPv4 and IPv6 addreses for a host, as illustrated
by the example hosts file in the **hosts(5)** man page (http://man7.org/linux/man-pages/man5/hosts.5.html):
# The following lines are desirable for IPv4 capable hosts
127.0.0.1 localhost
# 127.0.1.1 is often used for the FQDN of the machine
127.0.1.1 thishost.mydomain.org thishost
192.168.1.10 foo.mydomain.org foo
192.168.1.13 bar.mydomain.org bar
146.82.138.7 master.debian.org master
209.237.226.90 www.opensource.org
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
This patch changes the intermediate storage format to use a `[]string`, and only
sorts entries if the input format in the compose file is a mapping. If the input
format is a list, the original sort-order is preserved.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `--host-add` flag adds a new `host:ip` mapping. Even though
adding an entry is idempotent (adding the same mapping multiple
times does not update the service's definition), it does not
_update_ an existing mapping with a new IP-address (multiple
IP-addresses can be defined for a host).
This patch removes the "or update" part from the flag's
description.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
and enable the new WarnUnmatchedDirective to warn if a nolint is unnecessary.
remove some unnecessary nolint
Signed-off-by: Daniel Nephin <dnephin@docker.com>
When deploying a stack from a compose file, the output did not show
that a secret or config was created. This patch adds messages for these.
Create a configuration file and compose file:
$ cat > config.yml <<EOF
hello: world
EOF
$ cat > secret.txt <<EOF
p@ssw0rd
EOF
$ cat > docker-compose.yml <<EOF
version: "3.3"
services:
test:
image: nginx:alpine
configs:
- source: myconfig
target: /my-config.yml
secrets:
- source: mysecret
target: /my-secret.txt
configs:
myconfig:
file: ./config.yml
secrets:
mysecret:
file: ./secret.txt
EOF
Before this patch is applied:
$ docker stack deploy -c docker-compose.yml example
Creating network example_default
Creating service example_test
After this patch is applied:
$ docker stack deploy -c docker-compose.yml example
Creating network example_default
Creating secret example_mysecret
Creating config example_myconfig
Creating service example_test
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Port mappings in `docker service ls` are quite verbose, and occupy a lot of
space when ranges of ports are published.
This patch improves the output by reconstructing ranges of ports.
Given the following service;
$ docker service create \
-p 60-61:60-61 \
-p 62:61 \
-p 80:80 \
-p 81:80 \
-p 90-95:90-95 \
-p 90-92:90-92/udp \
-p 93-96:93-96/udp \
--name foo \
nginx:alpine
Before this patch is applied:
$ docker service ls
ID NAME MODE REPLICAS IMAGE PORTS
u1kwguv841qg foo replicated 1/1 nginx:alpine *:60->60/tcp,*:61->61/tcp,*:62->61/tcp,*:80->80/tcp,*:81->80/tcp,*:90->90/tcp,*:91->91/tcp,*:92->92/tcp,*:93->93/tcp,*:94->94/tcp,*:95->95/tcp,*:90->90/udp,*:91->91/udp,*:92->92/udp,*:93->93/udp,*:94->94/udp,*:95->95/udp,*:96->96/udp
After this patch is applied:
$ docker service ls
ID NAME MODE REPLICAS IMAGE PORTS
u1kwguv841qg foo replicated 1/1 nginx:alpine *:60-62->60-61/tcp,*:80-81->80/tcp,*:90-95->90-95/tcp,*:90-96->90-96/udp
Additional enhancements can still be made, and marked as TODO in this change;
- combine non-consecutive ports mapped to a single port (`80->80`, `81->80`,
`84->80`, `86->80`, `87->80`); to be printed as `*:80-81,84,86-87->80`.
- combine `tcp` and `udp` mappings if their port-mapping is the same;
print `*:80-81->80-81/tcp+udp` instead of `*:80-81->80-81/tcp, *:80-81->80-81/udp`
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Running `docker service ps --quiet` should print the
full, non-truncated ID, even if the `--no-trunc` option
is not set.
This patch disables truncation if the `--quiet` flag
is set.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `docker container stats` output has a column (`CONTAINER`), that shows either
the container _id_ or container _name_, depending on the arguments given.
For example, running `docker container stats foobar` shows:
CONTAINER CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
foobar 0.00% 1.938MiB / 1.952GiB 0.10% 782B / 0B 4.11MB / 0B 2
Whereas `docker container stats 67b2525d8ad1` (`67b2525d8ad1` being the ID for
container `foobar`) shows:
CONTAINER CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
67b2525d8ad1 0.00% 1.938MiB / 1.952GiB 0.10% 916B / 0B 4.11MB / 0B 2
This behavior is confusing.
This patch updates the default output format for `docker stats` to use separate
columns for container ID and container Name (similar to `docker container ls`).
With this patch applied, both commands show the same output:
$ docker container stats foobar
CONTAINER ID NAME CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
67b2525d8ad10bb236a49960e93c09993b0baabeef12c2d46cd5f4fbb6f4808c foobar 0.00% 1.938MiB / 1.952GiB 0.10% 1.25kB / 0B 4.11MB / 0B 2
$ docker container stats 67b2525d8ad1
CONTAINER ID NAME CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
67b2525d8ad10bb236a49960e93c09993b0baabeef12c2d46cd5f4fbb6f4808c foobar 0.00% 1.938MiB / 1.952GiB 0.10% 1.31kB / 0B 4.11MB / 0B 2
Users that want to use the old format can configure a custom format in the
cli configuration file (`~/.docker/config.json`);
on Linux:
{
"statsFormat" : "table {{.Container}}\t{{.CPUPerc}}\t{{.MemUsage}}\t{{.MemPerc}}\t{{.NetIO}}\t{{.BlockIO}}\t{{.PIDs}}"
}
on Windows:
{
"statsFormat" : "table {{.Container}}\t{{.CPUPerc}}\t{{.MemUsage}}\t{{.NetIO}}\t{{.BlockIO}}"
}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The update includes bug fixes in gometalinter and updates to linters, which
discovered more linter problems.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Commit 330a0035334871d92207b583c1c36d52a244753f added a `--detach=false` option
to various service-related commands, with the intent to make this the default in
a future version (17.09).
This patch changes the default to use "interactive" (non-detached), allowing
users to override this by setting the `--detach` option.
To prevent problems when connecting to older daemon versions (17.05 and below,
see commit db60f25561), the detach option is
ignored for those versions, and detach is always true.
Before this change, a warning was printed to announce the upcoming default:
$ docker service create nginx:alpine
saxiyn3pe559d753730zr0xer
Since --detach=false was not specified, tasks will be created in the background.
In a future release, --detach=false will become the default.
After this change, no warning is printed, but `--detach` is disabled;
$ docker service create nginx:alpine
y9jujwzozi0hwgj5yaadzliq6
overall progress: 1 out of 1 tasks
1/1: running [==================================================>]
verify: Service converged
Setting the `--detach` flag makes the cli use the pre-17.06 behavior:
$ docker service create --detach nginx:alpine
280hjnzy0wzje5o56gr22a46n
Running against a 17.03 daemon, without specifying the `--detach` flag;
$ docker service create nginx:alpine
kqheg7ogj0kszoa34g4p73i8q
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Some mild refactoring of the docker info command;
- Use `fmt.Fprinln()` instead of `fmt.Fprintf()` where possible
- Rename `fprintfIfNotEmpty()` to `fprintlnNonEmpty()`, and removed
return variables, because they were not used. `fprintlnNonEmpty()`
now uses fmt.Fprintln()` instead of `fmt.Fprintf()`, because
formatting was not used.
- Use `fprintlnNonEmpty()` to get rid of some `if` statements
- Extract printing Swarm-related information to a `printSwarmInfo()` function
- Change `Http Proxy` and `Https Proxy` to `HTTP Proxy` / `HTTPS Proxy`
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: French Ben <frenchben@docker.com>
Update for the test to capture the proper removal
Signed-off-by: French Ben <frenchben@docker.com>
Satisfy lint length limit
Signed-off-by: French Ben <frenchben@docker.com>
Updated e2e test
Signed-off-by: French Ben <frenchben@docker.com>
To keep on a consistent behaviour such as in docker-service-ps
if docker-stack-ps didn't find a given stack, the command line
should exit with exit code 1.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
This patch fixes the following bug:
Running "docker image ls --digests" will add images digests
to the image table. However, when using "format" to display
images digests all of them are "<none>".
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Implement runRollback to not use runUpdate
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Add version tag and add flag quiet to suppress progress output
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Removed flags from warnDetachDefault
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Used command.Cli interface
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Add detach flag on rollback command
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Create a fakeClient for service commands
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Added unit test for rollback command
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Used command.Cli interface instead of *command.DockerCli in service commands
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Revert "Removed flags from warnDetachDefault"
This reverts commit 3e4f601c8a82cc2599a755dc693409bbc47917fc.
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Fixed test.NewFakeCli instanciation
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Removed unused receiver
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Replaced cli by dockerCli
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Revert "Removed unused receiver"
This reverts commit 604ef7c13df3d019949ca81d992db501114dafce.
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Fixed last typo
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Silvin Lubecki
Vincent Demeester
Paweł Szczekutowicz
Kir Kolyshkin
Brian Goff
Tibor Vass
Nicolas De Loof
Sebastiaan van Stijn
Riyaz Faizullabhoy
Renaud Gaubert
Kenfe-Mickael Laventure
Simon Ferquel
Jamie Hannaford
Kyle Spiers
Jamie Hannaford
Daniel Nephin
Vincent Demeester
John Howard
Abdur Rehman
Daniel Nephin
Arash Deshmeh
Sebastiaan van Stijn
Ashwini Oruganti
Chao Wang
Stephen J Day
allencloud
Sébastien HOUZÉ
Victor Vieux
Liron Levin
French Ben
Boaz Shuster
khaled souf
Ying Li
Tibor Vass
Marco Mariani
Christophe Vidal
Jimmy Leger