use current LTS versions of ubuntu where suitable, remove uses of
ubuntu:23.10 (which reache EOL), and and update some other examples
to use more current versions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit b36522b473)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
This test was just incorrect (and testing incorrect
behavior): it was checking that `docker run` exited with a `context
canceled` error after signalling the CLI/cancelling the command's
context, but this was incorrect (and was fixed in
991b1303da - which was when this test
started failing).
However, since this test assertion was happening inside of a goroutine,
it would sometimes pass if this assertion didn't get to run before the
test suite terminated. It was flaky because sometimes this assertion
inside the goroutine did get to execute, but after the test finished
execution, which is a big no-no.
As an aside, assertions inside goroutines are generally bad, and `govet`
even has a linter for this (but it only catches `t.Fatal` and `t.FailNow`
calls and not `assert.Xx`.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
(cherry picked from commit eac83574c1)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Such as with `docker run`, if a user CTRL-Cs while attached to a
container, we should forward the signal and wait for the exit from
`ContainerWait`, instead of just returning.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
(cherry picked from commit 7b46bfc5ac)
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
In 3f0d90a2a9 we introduced a global
signal handler and made sure all the contexts passed into command
execution get (appropriately) cancelled when we get a SIGINT.
Due to that change, and how we use this context during `docker attach`,
we started to return the context cancelation error when a user signals
the running `docker attach`.
Since this is the intended behavior, we shouldn't return an error, so
this commit adds checks to ignore this specific error in this case.
Also adds a regression test.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
(cherry picked from commit 66aa0f672c)
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Follow up to cc68c66c95 (there were more
tests with incorrect syntax).
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
(cherry picked from commit 4a7388f0dd)
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
Looks like this test was failing due to bad syntax on the `while` loop,
which caused it to die after 1 second. If the test took a bit longer,
the process would be dead before the following assertions run, causing
the test to fail/be flaky.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
(cherry picked from commit cc68c66c95)
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
This environment variable allows for setting additional headers
to be sent by the client. Headers set through this environment
variable are added to headers set through the config-file (through
the HttpHeaders field).
This environment variable can be used in situations where headers
must be set for a specific invocation of the CLI, but should not
be set by default, and therefore cannot be set in the config-file.
WARNING: If both config and environment-variable are set, the environment
variable currently overrides all headers set in the configuration file.
This behavior may change in a future update, as we are considering the
environment variable to be appending to existing headers (and to only
override headers with the same name).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 6638deb9d6)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes a quick pass through our tests;
Discard output/err
----------------------------------------------
Many tests were testing for error-conditions, but didn't discard output.
This produced a lot of noise when running the tests, and made it hard
to discover if there were actual failures, or if the output was expected.
For example:
=== RUN TestConfigCreateErrors
Error: "create" requires exactly 2 arguments.
See 'create --help'.
Usage: create [OPTIONS] CONFIG file|- [flags]
Create a config from a file or STDIN
Error: "create" requires exactly 2 arguments.
See 'create --help'.
Usage: create [OPTIONS] CONFIG file|- [flags]
Create a config from a file or STDIN
Error: error creating config
--- PASS: TestConfigCreateErrors (0.00s)
And after discarding output:
=== RUN TestConfigCreateErrors
--- PASS: TestConfigCreateErrors (0.00s)
Use sub-tests where possible
----------------------------------------------
Some tests were already set-up to use test-tables, and even had a usable
name (or in some cases "error" to check for). Change them to actual sub-
tests. Same test as above, but now with sub-tests and output discarded:
=== RUN TestConfigCreateErrors
=== RUN TestConfigCreateErrors/requires_exactly_2_arguments
=== RUN TestConfigCreateErrors/requires_exactly_2_arguments#01
=== RUN TestConfigCreateErrors/error_creating_config
--- PASS: TestConfigCreateErrors (0.00s)
--- PASS: TestConfigCreateErrors/requires_exactly_2_arguments (0.00s)
--- PASS: TestConfigCreateErrors/requires_exactly_2_arguments#01 (0.00s)
--- PASS: TestConfigCreateErrors/error_creating_config (0.00s)
PASS
It's not perfect in all cases (in the above, there's duplicate "expected"
errors, but Go conveniently adds "#01" for the duplicate). There's probably
also various tests I missed that could still use the same changes applied;
we can improve these in follow-ups.
Set cmd.Args to prevent test-failures
----------------------------------------------
When running tests from my IDE, it compiles the tests before running,
then executes the compiled binary to run the tests. Cobra doesn't like
that, because in that situation `os.Args` is taken as argument for the
command that's executed. The command that's tested now sees the test-
flags as arguments (`-test.v -test.run ..`), which causes various tests
to fail ("Command XYZ does not accept arguments").
# compile the tests:
go test -c -o foo.test
# execute the test:
./foo.test -test.v -test.run TestFoo
=== RUN TestFoo
Error: "foo" accepts no arguments.
The Cobra maintainers ran into the same situation, and for their own
use have added a special case to ignore `os.Args` in these cases;
https://github.com/spf13/cobra/blob/v1.8.1/command.go#L1078-L1083
args := c.args
// Workaround FAIL with "go test -v" or "cobra.test -test.v", see #155
if c.args == nil && filepath.Base(os.Args[0]) != "cobra.test" {
args = os.Args[1:]
}
Unfortunately, that exception is too specific (only checks for `cobra.test`),
so doesn't automatically fix the issue for other test-binaries. They did
provide a `cmd.SetArgs()` utility for this purpose
https://github.com/spf13/cobra/blob/v1.8.1/command.go#L276-L280
// SetArgs sets arguments for the command. It is set to os.Args[1:] by default, if desired, can be overridden
// particularly useful when testing.
func (c *Command) SetArgs(a []string) {
c.args = a
}
And the fix is to explicitly set the command's args to an empty slice to
prevent Cobra from falling back to using `os.Args[1:]` as arguments.
cmd := newSomeThingCommand()
cmd.SetArgs([]string{})
Some tests already take this issue into account, and I updated some tests
for this, but there's likely many other ones that can use the same treatment.
Perhaps the Cobra maintainers would accept a contribution to make their
condition less specific and to look for binaries ending with a `.test`
suffix (which is what compiled binaries usually are named as).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit ab230240ad)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We'll be using release branches for minor version updates, so instead
of (e.g.) a 27.0 branch, we'll be using 27.x and continue using the
branch for minor version updates.
This patch changes the validation step to only compare against the
major version.
Co-authored-by: Cory Snider <corhere@gmail.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 6d8fcbb233)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is the version used in the dev-container, and for testing.
release notes: https://github.com/docker/compose/releases/tag/v2.29.0
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 77c0d83602)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This is the version used in the dev-container, and for testing.
release notes:
https://github.com/docker/buildx/releases/tag/v0.16.1
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit d00e1abf55)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
No changes in vendored files. This one got out of sync with the other modules
from the same repository.
full diff: d307bd883b...49dd2c1f3d
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit a77ba7eda8)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this patch:
docker run --volumes-from amazing_nobel
amazing_cannon boring_wozniak determined_banzai
elegant_solomon reverent_booth amazing_nobel
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit d6f78cdbb1)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
With this patch:
docker run --restart <TAB>
always no on-failure unless-stopped
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 7fe7223c2c)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this, it would panic when a nil-interface was passed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit e4dd8b1898)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
registerCompletionFuncForGlobalFlags was called from newDockerCommand,
at which time no context-store is initialized yet, so it would return
a nil value, probably resulting in `store.Names` to panic, but these
errors are not shown when running the completion. As a result, the flag
completion would fall back to completing from filenames.
This patch changes the function to dynamically get the context-store;
this fixes the problem mentioned above, because at the time the completion
function is _invoked_, the CLI is fully initialized, and does have a
context-store available.
A (non-exported) interface is defined to allow the function to accept
alternative implementations (not requiring a full command.DockerCLI).
Before this patch:
docker context create one
docker context create two
docker --context <TAB>
.DS_Store .idea/ Makefile
.dockerignore .mailmap build/
...
With this patch:
docker context create one
docker context create two
docker --context <TAB>
default one two
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
(cherry picked from commit 42b68a3ed7)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sebastiaan van Stijn
Sebastiaan van Stijn
Paweł Gronowski
Laura Brehm
plaurent