The trust tests were not resetting the environment after they
ran, which could result in tests following those tests to fail.
While at it, I also updated some other tests to use gotest.tools
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `docker push` command up until [v0.9.1](https://github.com/moby/moby/blob/v0.9.1/api/client.go#L998)
always pushed all tags of a given image, so `docker push foo/bar` would push (e.g.)
all of `foo/bar:latest`, `foo:/bar:v1`, `foo/bar:v1.0.0`.
Pushing all tags of an image was not desirable in many case, so docker v0.10.0
enhanced `docker push` to optionally specify a tag to push (`docker push foo/bar:v1`)
(see https://github.com/moby/moby/issues/3411 and the pull request that implemented
this: https://github.com/moby/moby/pull/4948).
This behavior exists up until today, and is confusing, because unlike other commands,
`docker push` does not default to use the `:latest` tag when omitted, but instead
makes it push "all tags of the image"
For example, in the following situation;
```
docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
thajeztah/myimage latest b534869c81f0 41 hours ago 1.22MB
```
Running `docker push thajeztah/myimage` seemingly does the expected behavior (it
pushes `thajeztah/myimage:latest` to Docker Hub), however, it does not so for the
reason expected (`:latest` being the default tag), but because `:latest` happens
to be the only tag present for the `thajeztah/myimage` image.
If another tag exists for the image:
```
docker images
REPOSITORY TAG IMAGE ID CREATED SIZE
thajeztah/myimage latest b534869c81f0 41 hours ago 1.22MB
thajeztah/myimage v1.0.0 b534869c81f0 41 hours ago 1.22MB
```
Running the same command (`docker push thajeztah/myimage`) will push _both_ images
to Docker Hub.
> Note that the behavior described above is currently not (clearly) documented;
> the `docker push` reference documentation (https://docs.docker.com/engine/reference/commandline/push/)
does not mention that omitting the tag will push all tags
This patch changes the default behavior, and if no tag is specified, `:latest` is
assumed. To push _all_ tags, a new flag (`-a` / `--all-tags`) is added, similar
to the flag that's present on `docker pull`.
With this change:
- `docker push myname/myimage` will be the equivalent of `docker push myname/myimage:latest`
- to push all images, the user needs to set a flag (`--all-tags`), so `docker push --all-tags myname/myimage:latest`
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this patch:
docker push --quiet nosuchimage
docker.io/library/nosuchimage
echo $?
0
With this patch applied:
docker push --quiet nosuchimage:latest
An image does not exist locally with the tag: nosuchimage
echo $?
1
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Comments should have a leading space unless the comment is
for special purposes (go:generate, nolint:)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
cli/command/image/build.go:434:32: SA1006: printf-style function with dynamic format string and no further arguments should use print-style function instead (staticcheck)
fmt.Fprintf(dockerCli.Out(), imageID)
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this patch:
```
Usage: docker build [OPTIONS] PATH | URL | -
Build an image from a Dockerfile
Options:
--add-host list Add a custom host-to-IP mapping (host:ip)
--build-arg list Set build-time variables
--cache-from strings Images to consider as cache sources
--cgroup-parent string Optional parent cgroup for the container
--cpu-period int Limit the CPU CFS (Completely Fair Scheduler) period
--cpu-quota int Limit the CPU CFS (Completely Fair Scheduler) quota
-c, --cpu-shares int CPU shares (relative weight)
--cpuset-cpus string CPUs in which to allow execution (0-3, 0,1)
--cpuset-mems string MEMs in which to allow execution (0-3, 0,1)
--disable-content-trust Skip image verification (default true)
-f, --file string Name of the Dockerfile (Default is 'PATH/Dockerfile')
--force-rm Always remove intermediate containers
--iidfile string Write the image ID to the file
--isolation string Container isolation technology
--label list Set metadata for an image
-m, --memory bytes Memory limit
--memory-swap bytes Swap limit equal to memory plus swap: '-1' to enable unlimited swap
--network string Set the networking mode for the RUN instructions during build (default "default")
--no-cache Do not use cache when building the image
-o, --output stringArray Output destination (format: type=local,dest=path)
--platform string Set platform if server is multi-platform capable
--progress string Set type of progress output (auto, plain, tty). Use plain to show container output (default "auto")
--pull Always attempt to pull a newer version of the image
-q, --quiet Suppress the build output and print image ID on success
--rm Remove intermediate containers after a successful build (default true)
--secret stringArray Secret file to expose to the build (only if BuildKit enabled): id=mysecret,src=/local/secret
--security-opt strings Security options
--shm-size bytes Size of /dev/shm
--squash Squash newly built layers into a single new layer
--ssh stringArray SSH agent socket or keys to expose to the build (only if BuildKit enabled) (format: default|<id>[=<socket>|<key>[,<key>]])
-t, --tag list Name and optionally a tag in the 'name:tag' format
--target string Set the target build stage to build.
--ulimit ulimit Ulimit options (default [])
```
With this patch applied:
```
DOCKER_BUILDKIT=1 docker build --help
Usage: docker build [OPTIONS] PATH | URL | -
Build an image from a Dockerfile
Options:
--add-host list Add a custom host-to-IP mapping (host:ip)
--build-arg list Set build-time variables
--cache-from strings Images to consider as cache sources
--disable-content-trust Skip image verification (default true)
-f, --file string Name of the Dockerfile (Default is 'PATH/Dockerfile')
--iidfile string Write the image ID to the file
--isolation string Container isolation technology
--label list Set metadata for an image
--network string Set the networking mode for the RUN instructions during build (default "default")
--no-cache Do not use cache when building the image
-o, --output stringArray Output destination (format: type=local,dest=path)
--platform string Set platform if server is multi-platform capable
--progress string Set type of progress output (auto, plain, tty). Use plain to show container output (default "auto")
--pull Always attempt to pull a newer version of the image
-q, --quiet Suppress the build output and print image ID on success
--secret stringArray Secret file to expose to the build (only if BuildKit enabled): id=mysecret,src=/local/secret
--squash Squash newly built layers into a single new layer
--ssh stringArray SSH agent socket or keys to expose to the build (only if BuildKit enabled) (format: default|<id>[=<socket>|<key>[,<key>]])
-t, --tag list Name and optionally a tag in the 'name:tag' format
--target string Set the target build stage to build.
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
--stream was always experimental and this patch removes the functionality.
Users should enable BuildKit with DOCKER_BUILDKIT=1
Signed-off-by: Tibor Vass <tibor@docker.com>
As pointed out in #1459, docker cli fails to detect that the input is a tarball,
in case it is generated by `git archive --format=tgz`.
This happens because `git archive` adds some metadata to the initial tar header,
and so it is more than 1 block (of 512 bytes) long, while we only provide 1 block
to archive/tar.Next() and it fails.
To fix, give it 2 blocks :)
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This patch fixes a bug where labels use the same behavior as `--env`, resulting
in a value to be copied from environment variables with the same name as the
label if no value is set (i.e. a simple key, no `=` sign, no value).
An earlier pull request addressed similar cases for `docker run`;
2b17f4c8a8, but this did not address the
same situation for (e.g.) `docker service create`.
Digging in history for this bug, I found that use of the `ValidateEnv`
function for labels was added in the original implementation of the labels feature in
abb5e9a077 (diff-ae476143d40e21ac0918630f7365ed3cR34)
However, the design never intended it to expand environment variables,
and use of this function was either due to either a "copy/paste" of the
equivalent `--env` flags, or a misunderstanding (the name `ValidateEnv` does
not communicate that it also expands environment variables), and the existing
`ValidateLabel` was designed for _engine_ labels (which required a value to
be set).
Following the initial implementation, other parts of the code followed
the same (incorrect) approach, therefore leading the bug to be introduced
in services as well.
This patch:
- updates the `ValidateLabel` to match the expected validation
rules (this function is no longer used since 31dc5c0a9a),
and the daemon has its own implementation)
- corrects various locations in the code where `ValidateEnv` was used instead of `ValidateLabel`.
Before this patch:
```bash
export SOME_ENV_VAR=I_AM_SOME_ENV_VAR
docker service create --label SOME_ENV_VAR --tty --name test busybox
docker service inspect --format '{{json .Spec.Labels}}' test
{"SOME_ENV_VAR":"I_AM_SOME_ENV_VAR"}
```
After this patch:
```bash
export SOME_ENV_VAR=I_AM_SOME_ENV_VAR
docker service create --label SOME_ENV_VAR --tty --name test busybox
docker container inspect --format '{{json .Config.Labels}}' test
{"SOME_ENV_VAR":""}
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add `--quiet` to the `docker image pull` subcommand that will not pull
the image quietly.
```
$ docker pull -q golang
Using default tag: latest
```
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
- make it possible to extract the formatter implementation from the
"common" code, that way, the formatter package stays small
- extract some formatter into their own packages
This is essentially moving the "formatter" implementation of each type
in their respective packages. The *main* reason to do that, is to be
able to depend on `cli/command/formatter` without depending of the
implementation detail of the formatter. As of now, depending on
`cli/command/formatter` means we depend on `docker/docker/api/types`,
`docker/licensing`, … — that should not be the case. `formatter`
should hold the common code (or helpers) to easily create formatter,
not all formatter implementations.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Avoid testing for session support in non-buildkit builder to support
servers that falsely report as `1.39` compatible
Signed-off-by: Tibor Vass <tibor@docker.com>
Unlike `docker build --secret`, `docker build --ssh` allows the build container to
use SSH keys with passphrases.
$ eval $(ssh-agent)
$ ssh-add ~/.ssh/id_rsa
(Input your passphrase here)
$ docker build --ssh default=$SSH_AUTH_SOCK ...
This feature requires the daemon with `CapExecMountSSH` build capability (moby/moby#37973) .
Currently, the official Dockerfile frontend does not provide the syntax for using the SSH forwarder.
However, the experimental `RUN --mount=type=ssh` syntax can be enabled by using
the Dockerfile frontend image built with the `BUILDTAGS="dfrunmount dfssh"`, via the `# syntax =` "shebang".
The Dockerfile for the Dockerfile frontend is available at github.com/moby/buildkit/frontend/dockerfile/cmd/dockerfile-frontend)
The pre-built image is also available as `tonistiigi/dockerfile:ssh20181002` .
An example Dockerfile with `RUN --mount=type=ssh`:
# syntax = tonistiigi/dockerfile:ssh20181002
FROM alpine
RUN apk add --no-cache openssh-client
RUN mkdir -p -m 0700 ~/.ssh && ssh-keyscan gitlab.com >> ~/.ssh/known_hosts
RUN --mount=type=ssh ssh git@gitlab.com | tee /hello
# "Welcome to GitLab, @GITLAB_USERNAME_ASSOCIATED_WITH_SSHKEY" should be printed here
More info available at moby/buildkit#608, moby/buildkit#655
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
This patch implements `docker build --secret id=mysecret,src=/secret/file`
for buildkit frontends that request the mysecret secret.
It is currently implemented in the tonistiigi/dockerfile:secrets20180808
frontend via RUN --mount=type=secret,id=mysecret
Signed-off-by: Tibor Vass <tibor@docker.com>
This changes the experimental --console flag to --progress following
feedback indicating avoidable confusion.
In addition to naming changes, the help output now has an additional
clarification, specifically: container output during builds are only
shown when progress output is set to plain. Not mentioning this was also
a big cause of confusion.
Signed-off-by: Tibor Vass <tibor@docker.com>
Unfortunately, this is for now the only way to see the output of RUN commands when using buildkit.
It is equivalent to `DOCKER_BUILDKIT=1 docker build . 2>&1 | cat`
Signed-off-by: Tibor Vass <tibor@docker.com>
With this patch the following become true even with buildkit enabled:
1. `docker build -q .` only outputs the created image's sha256 ID.
2. `docker build -q .` outputs as if no `-q` was specified, if error occurred
3. `docker build . &> out` outputs JSON (instead of TTY characters)
Signed-off-by: Tibor Vass <tibor@docker.com>
This commit brings a more pedantic change in the following ambiguous case:
cat Dockerfile | docker build -f otherDockerfile -
The legacy builder does not error out and prefers the Dockerfile from stdin
while the buildkit-based one errors out.
Note that this is only in the case where stdin is a Dockerfile (not an archive)
Signed-off-by: Tibor Vass <tibor@docker.com>
Since go 1.7, "context" is a standard package. Since go 1.9,
x/net/context merely provides some types aliased to those in
the standard context package.
The changes were performed by the following script:
for f in $(git ls-files \*.go | grep -v ^vendor/); do
sed -i 's|golang.org/x/net/context|context|' $f
goimports -w $f
for i in 1 2; do
awk '/^$/ {e=1; next;}
/\t"context"$/ {e=0;}
{if (e) {print ""; e=0}; print;}' < $f > $f.new && \
mv $f.new $f
goimports -w $f
done
done
[v2: do awk/goimports fixup twice]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
It will be helpful to expose the pull implementation which supports
pulling private images for other CLI commands that rely on helper images.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
- `replaceDockerfileForContentTrust` is only used when content trust is
enabled, so remove the boolean.
- rename `isContentTrustEnabled` to `contentTrustEnabled`
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Some of them are skipped for now (because the feature is not supported
or needs more work), some of them are fixed.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Fix tests that failed when using cmp.Compare()
internal/test/testutil/assert
InDelta
Fix DeepEqual with kube metav1.Time
Convert some ErrorContains to assert
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Historically, the Dockerfile had to be insde the build-context, because it was
sent as part of the build-context.
3f6dc81e10
added support for passing the Dockerfile through stdin, in which case the
contents of the Dockerfile is injected into the build-context.
This patch uses the same mechanism for situations where the location of the
Dockerfile is passed, and its path is outside of the build-context.
Before this change:
$ mkdir -p myproject/context myproject/dockerfiles && cd myproject
$ echo "hello" > context/hello
$ echo -e "FROM busybox\nCOPY /hello /\nRUN cat /hello" > dockerfiles/Dockerfile
$ docker build --no-cache -f $PWD/dockerfiles/Dockerfile $PWD/context
unable to prepare context: the Dockerfile (/Users/sebastiaan/projects/test/dockerfile-outside/myproject/dockerfiles/Dockerfile) must be within the build context
After this change:
$ mkdir -p myproject/context myproject/dockerfiles && cd myproject
$ echo "hello" > context/hello
$ echo -e "FROM busybox\nCOPY /hello /\nRUN cat /hello" > dockerfiles/Dockerfile
$ docker build --no-cache -f $PWD/dockerfiles/Dockerfile $PWD/context
Sending build context to Docker daemon 2.607kB
Step 1/3 : FROM busybox
---> 6ad733544a63
Step 2/3 : COPY /hello /
---> 9a5ae1c7be9e
Step 3/3 : RUN cat /hello
---> Running in 20dfef2d180f
hello
Removing intermediate container 20dfef2d180f
---> ce1748f91bb2
Successfully built ce1748f91bb2
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: John Howard <jhoward@microsoft.com>
This is the CLI updates for the document discussed in https://github.com/moby/moby/issues/34617
to support Linux Containers on Windows. It adds --platform= as CLI flags to the four
commands listed above. Import still to be completed (needs daemon changes).
Fix 19 typos, grammatical errors and duplicated words.
These fixes have minimal impact on the code as these are either in the
doc files or in comments inside the code files.
Signed-off-by: Abdur Rehman <abdur_rehman@mentor.com>
The update includes bug fixes in gometalinter and updates to linters, which
discovered more linter problems.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
The validation functions to test for the number of passed arguments did not
pluralize `argument(s)`, and used `argument(s)` in all cases.
This patch adds a simple `pluralize()` helper to improve this.
Before this change, `argument(s)` was used in all cases:
$ docker container ls foobar
"docker container ls" accepts no argument(s).
$ docker network create one two
"docker network create" requires exactly 1 argument(s).
$ docker network connect
"docker network connect" requires exactly 2 argument(s).
$ docker volume create one two
"docker volume create" requires at most 1 argument(s).
After this change, `argument(s)` is properly singularized or plurarized:
$ docker container ls foobar
"docker container ls" accepts no arguments.
$ docker network create one two
"docker network create" requires exactly 1 argument.
$ docker network connect
"docker network connect" requires exactly 2 arguments.
$ docker volume create one two
"docker volume create" requires at most 1 argument.
Test cases were updated accordingly.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sebastiaan van Stijn
Silvin Lubecki
Dominik Braun
Justyn Temme
Silvin Lubecki
Sebastiaan van Stijn
Tibor Vass
Sam
knqyf263
Tonis Tiigi
Nao YONASHIRO
Lifubang
Kir Kolyshkin
Philipp Schmied
Vincent Demeester
Tibor Vass
Li Yi
Akihiro Suda
John Howard
Anda Xu
Andrew Hsu
Zachary Romero
Mathieu Champlon
Daniel Hiltgen
Daniel Nephin
Akim Demaille
Vincent Demeester
Abdur Rehman
Brian Goff
Kyle Spiers
Arash Deshmeh
Daniel Nephin
Riyaz Faizullabhoy
Sébastien HOUZÉ
Simon Ferquel
Darren Stahl