This new flag will allow the configuration of an interface that
can be used for data path traffic to be isolated from control
plane traffic. This flag is simply percolated down to libnetwork
and will be used by all the global scope drivers (today overlay)
Negative test added for invalid flag arguments
Signed-off-by: Flavio Crisciani <flavio.crisciani@docker.com>
This does some minor fix-ups in the CLI reference
for "history", and copies the formattting section to
the man-pages.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
Adds to history documentation for --format
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
Adds MarshalJSON to historyContext for {{json .}} format
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
Adds back the --human option to history command
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
Cleans up formatter around --human option for history, Adds integration test for --format option of history
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
Adds test for history formatter checking full table results, Runs go fmt on touched files
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
Fixes lint errors in formatter/history
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
Runs go fmt on cli/command/formatter/history.go
Signed-off-by: Jeremy Chambers <jeremy@thehipbot.com>
sRemoves integration test for --format option of history
Merges Created and CreatedSince in docker history formatter, Updates docs and tests
Simplified the docs on how to set environment variables in a
container. Makes it clear that you have three options, and how
to use them.
Signed-off-by: Joao Fernandes <joao.fernandes@docker.com>
Also fixed some examples of using `docker build` to clarify that the
positional argument is a directory, not a file.
Also fixed some terminology. Dockerfiles contain instructions, not directives or
commands.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
If no fields related to an update config or restart policy are
specified, these structs should not be created as part of the service,
to avoid hardcoding the current defaults.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Service logs API is now stable. Service logs now support all features,
except retrieving details provided to the log driver.
Signed-off-by: Drew Erny <drew.erny@docker.com>
This allows graphdrivers to declare that they can reproduce the original
diff stream for a layer. If they do so, the layer store will not use
tar-split processing, but will still verify the digest on layer export.
This makes it easier to experiment with non-default diff formats.
Signed-off-by: Alfred Landrum <alfred.landrum@docker.com>
[17.04.x] deprecation and changelog updates
(cherry picked from commit f15f5937514c386ace40a43441dddc28337ca12d)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Logging plugins use the same HTTP interface as other plugins for basic
command operations meanwhile actual logging operations are handled (on
Unix) via a fifo.
The plugin interface looks like so:
```go
type loggingPlugin interface {
StartLogging(fifoPath string, loggingContext Context) error
StopLogging(fifoPath)
```
This means a plugin must implement `LoggingDriver.StartLogging` and
`LoggingDriver.StopLogging` endpoints and be able to consume the passed
in fifo.
Logs are sent via stream encoder to the fifo encoded with protobuf.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This fix tries to address the issue raised in 31032 where it was
not possible to specify `--cpus` for `docker update`.
This fix adds `--cpus` support for `docker update`. In case both
`--cpus` and `--cpu-period/--cpu-quota` have been specified,
an error will be returned.
Related docs has been updated.
Integration tests have been added.
This fix fixes 31032.
This fix is related to 27921, 27958.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Resolve networks IDs on the client side.
Avoid filling in deprecated Spec.Networks field.
Sort networks in the TaskSpec for update stability.
Add an integration test for changing service networks.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This parameter controls the order of operations when rolling out an
update task. Either the old task is stopped before starting the new one,
or the new task is started first, and the running tasks will briefly
overlap.
This commit adds Rollout to the API, and --update-order / --rollback-order
flags to the CLI.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This commit adds a hidden placeholder of `.Self` for
`docker node ls --format` so that if the node is the same
as the current docker daemon, then a `*` is outputed.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the comment https://github.com/docker/docker/pull/30376#discussion_r97465334
where it was not possible to specify `--format` for `docker node ls`. The `--format` flag
is a quite useful flag that could be used in many places such as completion.
This fix implements `--format` for `docker node ls` and add `nodesFormat` in config.json
so that it is possible to specify the output when `docker node ls` is invoked.
Related documentations have been updated.
A set of unit tests have been added.
This fix is related to #30376.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is related to 30232 wherw `docker service ls`
does not show `PORTS` information like `docker service ps`.
This fix adds `PORTS` fields for services that publish
ports in ingress mode.
Additional unit tests cases have been updated.
This fix is related to 30232.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Change "service create" and "service update" to wait until the creation
or update finishes, when --detach=false is specified. Show progress bars
for the overall operation and for each individual task (when there are a
small enough number of tasks), unless "-q" / "--quiet" is specified.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Updated legacy_plugins.md to include BeeGFS plugin
(cherry picked from commit d0057bd12dae5276b83e931e9e9ea185c58486a2)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fixes#30841. The "filter" section had the wrong header size, which
caused sections following it to have the wrong indentation in the
right-side table of contents.
Signed-off-by: Greg Pflaum <gpflaum@users.noreply.github.com>
This fix tries to address the request in 31324 by adding
`--filter scope=swarm|local` for `docker network ls`.
As `docker network ls` has a `SCOPE` column by default,
it is natural to add the support of `--filter scope=swarm|local`.
This fix adds the `scope=swarm|local` support for
`docker network ls --filter`.
Related docs has been updated.
Additional unit test cases have been added.
This fix fixes 31324.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Tested using global-net-plugin-ipc which sets PidHost in config.json.
Plugins might need access to host pid namespace. Add support for that.
Tested using aragunathan/global-net-plugin-ipc which sets "pidhost" in
config.json. Observed using `readlink /proc/self/ns/pid` that plugin and
host have the same ns.
Signed-off-by: Anusha Ragunathan <anusha.ragunathan@docker.com>
Plugins might need access to host ipc namespace. A good usecase is
a volume plugin running iscsi multipath commands that need access to
host kernel locks.
Tested with a custom plugin (aragunathan/global-net-plugin-full) that's
built with `"ipchost" : true` in config.json. Observed using
`readlink /proc/self/ns/ipc` that plugin and host have the same ns.
Signed-off-by: Anusha Ragunathan <anusha.ragunathan@docker.com>
Removes the build-args from the image history if they are in the
BuiltinAllowedBuildArgs map unless they are explicitly defined in an ARG
instruction.
Signed-off-by: Dave Tucker <dt@docker.com>
The `reference` filter is documented in the file, but is not present
in the list of available filters.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to address the request in 31325 by adding
`--filter mode=global|replicated` to `docker service ls`.
As `docker service ls` has a `MODE` column by default, it is natural
to support `--filter mode=global|replicated` for `docker service ls`.
There are multiple ways to address the issue. One way is to pass
the filter of mode to SwarmKit, another way is to process the filter
of mode in the daemon.
This fix process the filter in the daemon.
Related docs has been updated.
An integration test has been added.
This fix fixes 31325.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Starting with docker 1.10, docker no longer uses
/etc/hosts for service discovery, but uses an
embedded DNS server. This patch removes a reference
to the old (pre 1.10) behavior.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The description claims the directive is appearing after a comment but
the sample Dockerfile has the directive appear after an instruction.
Changed the ordering of the lines to match the example's description.
Signed-off-by: Remy Suen <remy.suen@gmail.com>
This adds support for placement preferences in Swarm services.
- Convert PlacementPreferences between GRPC API and HTTP API
- Add --placement-pref, --placement-pref-add and --placement-pref-rm to CLI
- Add support for placement preferences in service inspect --pretty
- Add integration test
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
These Markdown files are now embedded in a YAML
file for templating in the documentation, and
these special markers are no longer needed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix tries to address the issue raised in 25696 where
it was not possible to specify `--stop-signal` for `docker service create`
and `docker service update`, in order to use special signal to stop
the container.
This fix adds `--stop-signal` and update the `StopSignal` in `Config`
through `service create` and `service update`.
Related docs has been updated.
Integration test has been added.
This fix fixes 25696.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
A phrase from the "Text files" section in build.md was incorrectly duplicated under the "Tarball contexts" section.
Signed-off-by: Peter Jaffe <pjaffe@nevo.com>
This fix tries to address the issue raised in 27189 where
it is not possible to support configured formatting stored in
config.json.
Since `--format` was not supported in `docker service ps`,
the flag `--format` has also been added in this fix.
This fix
1. Add `--format` to `docker service ps`
2. Add `tasksFormat` to config.json
3. Add `--format` to `docker stack ps`
4. Add `--format` to `docker node ps`
The related docs has been updated.
An integration test has been added.
This fix fixes 27189.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This is especially important for distributions like NixOS where `/bin/bash` doesn't exist, or for MacOS users who've installed a newer version of Bash than the one that comes with their OS.
Signed-off-by: Andrew "Tianon" Page <admwiggin@gmail.com>
Command name should be a H1
Only Description, Examples, and Related Commands should be H2
Changed 'Related information' heading to 'Related commands' since 99% it is only linking commands
Added some examples where relevant
Signed-off-by: Misty Stanley-Jones <misty@docker.com>
Signed-off-by: Lewis Daly <lewisdaly@me.com>
Updated uid/gid reference to be more canonical - and signed commit
Signed-off-by: Lewis Daly <lewisdaly@me.com>
Editorial suggestion
I tried my hand at rewriting this a bit for readability. Can you please verify that the facts are correct, especially about the permission changes? You can feel free to squash my commit with yours so that it's signed. You'll need to pull the change from your fork to work on it locally.
Editorial suggestion
I tried my hand at rewriting this a bit for readability. Can you please verify that the facts are correct, especially about the permission changes? You can feel free to squash my commit with yours so that it's signed. You'll need to pull the change from your fork to work on it locally.
This persists the "propagated mount" for plugins outside the main
rootfs. This enables `docker plugin upgrade` to not remove potentially
important data during upgrade rather than forcing plugin authors to hard
code a host path to persist data to.
Also migrates old plugins that have a propagated mount which is in the
rootfs on daemon startup.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This allows a plugin to be upgraded without requiring to
uninstall/reinstall a plugin.
Since plugin resources (e.g. volumes) are tied to a plugin ID, this is
important to ensure resources aren't lost.
The plugin must be disabled while upgrading (errors out if enabled).
This does not add any convenience flags for automatically
disabling/re-enabling the plugin during before/after upgrade.
Since an upgrade may change requested permissions, the user is required
to accept permissions just like `docker plugin install`.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Signed-off-by: John Howard <jhoward@microsoft.com>
Working directory processing was handled differently for Hyper-V and Windows-Server containers, as annotated in the builder documentation (updated in this PR). For Hyper-V containers, the working directory set by WORKDIR was not created. This PR makes Hyper-V containers work the same as Windows Server containers (and the same as Linux).
Example (only applies to Hyper-V containers, so not reproducible under CI environment)
Dockerfile:
FROM microsoft/nanoserver
WORKDIR c:\installer
ENV GOROOT=c:\installer
ADD go.exe .
RUN go --help
Running on Windows Server 2016, using docker master without this change, but with daemon set to --exec-opt isolation=hyperv as it would be for Client operating systems.
PS E:\go\src\github.com\docker\docker> dockerd -g c:\control --exec-opt isolation=hyperv
time="2017-02-01T15:48:09.657286100-08:00" level=info msg="Windows default isolation mode: hyperv"
time="2017-02-01T15:48:09.662720900-08:00" level=info msg="[graphdriver] using prior storage driver: windowsfilter"
time="2017-02-01T15:48:10.011588000-08:00" level=info msg="Graph migration to content-addressability took 0.00 seconds"
time="2017-02-01T15:48:10.016655800-08:00" level=info msg="Loading containers: start."
time="2017-02-01T15:48:10.460820000-08:00" level=info msg="Loading containers: done."
time="2017-02-01T15:48:10.509859600-08:00" level=info msg="Daemon has completed initialization"
time="2017-02-01T15:48:10.509859600-08:00" level=info msg="Docker daemon" commit=3c64061 graphdriver=windowsfilter version=1.14.0-dev
First with no explicit isolation:
PS E:\docker\build\unifyworkdir> docker build --no-cache .
Sending build context to Docker daemon 10.1 MB
Step 1/5 : FROM microsoft/nanoserver
---> 89b8556cb9ca
Step 2/5 : WORKDIR c:\installer
---> 7e0f41d08204
Removing intermediate container 236c7802042a
Step 3/5 : ENV GOROOT c:\installer
---> Running in 8ea5237183c1
---> 394b70435261
Removing intermediate container 8ea5237183c1
Step 4/5 : ADD go.exe .
---> e47401a1745c
Removing intermediate container 88dcc28e74b1
Step 5/5 : RUN go --help
---> Running in efe90e1b6b8b
container efe90e1b6b8b76586abc5c1dc0e2797b75adc26517c48733d90651e767c8463b encountered an error during CreateProcess: failure in a Windows system call: The directory name is invalid. (0x10b) extra info: {"ApplicationName":"","CommandLine":"cmd /S /C go --help","User":"","WorkingDirectory":"C:\\installer","Environment":{"GOROOT":"c:\\installer"},"EmulateConsole":false,"CreateStdInPipe":true,"CreateStdOutPipe":true,"CreateStdErrPipe":true,"ConsoleSize":[0,0]}
PS E:\docker\build\unifyworkdir>
Then forcing process isolation:
PS E:\docker\build\unifyworkdir> docker build --isolation=process --no-cache .
Sending build context to Docker daemon 10.1 MB
Step 1/5 : FROM microsoft/nanoserver
---> 89b8556cb9ca
Step 2/5 : WORKDIR c:\installer
---> 350c955980c8
Removing intermediate container 8339c1e9250c
Step 3/5 : ENV GOROOT c:\installer
---> Running in bde511c5e3e0
---> b8820063b5b6
Removing intermediate container bde511c5e3e0
Step 4/5 : ADD go.exe .
---> e4ac32f8902b
Removing intermediate container d586e8492eda
Step 5/5 : RUN go --help
---> Running in 9e1aa235af5f
Cannot mkdir: C:\installer is not a directory
PS E:\docker\build\unifyworkdir>
Now compare the same results after this PR. Again, first with no explicit isolation (defaulting to Hyper-V containers as that's what the daemon it set to) - note it now succeeds 😄
PS E:\docker\build\unifyworkdir> docker build --no-cache .
Sending build context to Docker daemon 10.1 MB
Step 1/5 : FROM microsoft/nanoserver
---> 89b8556cb9ca
Step 2/5 : WORKDIR c:\installer
---> 4f319f301c69
Removing intermediate container 61b9c0b1ff6f
Step 3/5 : ENV GOROOT c:\installer
---> Running in c464a1d612d8
---> 96a26ab9a7b5
Removing intermediate container c464a1d612d8
Step 4/5 : ADD go.exe .
---> 0290d61faf57
Removing intermediate container dc5a085fffe3
Step 5/5 : RUN go --help
---> Running in 60bd56042ff8
Go is a tool for managing Go source code.
Usage:
go command [arguments]
The commands are:
build compile packages and dependencies
clean remove object files
doc show documentation for package or symbol
env print Go environment information
fix run go tool fix on packages
fmt run gofmt on package sources
generate generate Go files by processing source
get download and install packages and dependencies
install compile and install packages and dependencies
list list packages
run compile and run Go program
test test packages
tool run specified go tool
version print Go version
vet run go tool vet on packages
Use "go help [command]" for more information about a command.
Additional help topics:
c calling between Go and C
buildmode description of build modes
filetype file types
gopath GOPATH environment variable
environment environment variables
importpath import path syntax
packages description of package lists
testflag description of testing flags
testfunc description of testing functions
Use "go help [topic]" for more information about that topic.
The command 'cmd /S /C go --help' returned a non-zero code: 2
And the same with forcing process isolation. Also works 😄
PS E:\docker\build\unifyworkdir> docker build --isolation=process --no-cache .
Sending build context to Docker daemon 10.1 MB
Step 1/5 : FROM microsoft/nanoserver
---> 89b8556cb9ca
Step 2/5 : WORKDIR c:\installer
---> f423b9cc3e78
Removing intermediate container 41330c88893d
Step 3/5 : ENV GOROOT c:\installer
---> Running in 0b99a2d7bf19
---> e051144bf8ec
Removing intermediate container 0b99a2d7bf19
Step 4/5 : ADD go.exe .
---> 7072e32b7c37
Removing intermediate container a7a97aa37fd1
Step 5/5 : RUN go --help
---> Running in 7097438a54e5
Go is a tool for managing Go source code.
Usage:
go command [arguments]
The commands are:
build compile packages and dependencies
clean remove object files
doc show documentation for package or symbol
env print Go environment information
fix run go tool fix on packages
fmt run gofmt on package sources
generate generate Go files by processing source
get download and install packages and dependencies
install compile and install packages and dependencies
list list packages
run compile and run Go program
test test packages
tool run specified go tool
version print Go version
vet run go tool vet on packages
Use "go help [command]" for more information about a command.
Additional help topics:
c calling between Go and C
buildmode description of build modes
filetype file types
gopath GOPATH environment variable
environment environment variables
importpath import path syntax
packages description of package lists
testflag description of testing flags
testfunc description of testing functions
Use "go help [topic]" for more information about that topic.
The command 'cmd /S /C go --help' returned a non-zero code: 2
PS E:\docker\build\unifyworkdir>
This fix tries to improve the display of `docker service ls`
and adds `--format` flag to `docker service ls`.
In addition to `--format` flag, several other improvement:
1. Updates `docker stacks service`.
2. Adds `servicesFormat` to config file.
Related docs has been updated.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix made several updates:
1. Update opts.MemBytes so that default value will not show up.
The reason is that in case a default value is decided by daemon,
instead of client, we actually want to not show default value.
2. Move `docker run/create/build` to use opts.MemBytes for `--shm-size`
This is to bring consistency between daemon and docker run
3. docs updates.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix fixes issue raised in 29492 where it was not
possible to specify a default `--default-shm-size` in daemon
configuration for each `docker run``.
The flag `--default-shm-size` which is reloadable, has been
added to the daemon configuation.
Related docs has been updated.
This fix fixes 29492.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix adds `--filter capability=[volumedriver|authz]` to `docker plugin ls`.
The related docs has been updated.
An integration test has been added.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix adds `--filter enabled=true` to `docker plugin ls`,
as was specified in 28624.
The related API and docs has been updated.
An integration test has been added.
This fix fixes 28624.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the enhancement proposal raised in
27178 for filtering based on published or exposed ports of
`docker ps --filter`.
In this fix, two filter options, `publish` and `expose` have
been added to take either `<port>[/<protocol>]` or `<from>-<to>[/<protocol>]`
and filtering on containers.
An integration test has been added to cover the changes.
This fix fixes 27178.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This introduce a new `--device-cgroup-rule` flag that allow a user to
add one or more entry to the container cgroup device `devices.allow`
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
* Depending on the host configuration between the docker engine and the remote host we wish to mount using sshfs, a password may be required.
* Confirmed syntax for optional parameter with @vieux
* Verified change works as desired with engine running on Ubuntu host and mounting a volume from a file system on a Mac.
Signed-off-by: David Williamson <david.williamson@docker.com>
This fix tries to address the issue raised in 29972 where
it was not possible to specify `--read-only` for `docker service create`
and `docker service update`, in order to have the container's root file
system to be read only.
This fix adds `--read-only` and update the `ReadonlyRootfs` in `HostConfig`
through `service create` and `service update`.
Related docs has been updated.
Integration test has been added.
This fix fixes 29972.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
- Use the word letter rather than character to refer to letters ;) when trying to specify that only letters and numbers can be used, and not ANY character...
- Small corrections
Fixes#29821
Signed-off-by: Timothy Hobbs <timothy@hobbs.cz>
This fix tries to add a placeholder `.CreatedAt` for Go
format template in `docker network ls --format`.
While working on 29226, I noticed that it is not possible to
display network's creation time in `docker network ls`, with or
without `--format`.
We are able to find the timestamp through `docker network inspect` though.
However, as we allows networks to be pruned based on the timestamp
(see 29226), showing the timestamp in `docker network ls --format`
would be much useful now.
This fix adds the `.CreatedAt` placeholder for `docker network ls --format`.
The default output was not changed for `docker network ls --format`.
A test case for unit tests has been added.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Commit ed13c3abfb242905ec012e8255dc6f26dcf122f6 added flags
for Docker Content Trust. Depending on the `verify` boolean,
the message is "Skip image verification", or "Skip image signing".
"Signing" is intended for `docker push` / `docker plugin push`.
During the migration to Cobra, this boolean got flipped for
`docker push` (9640e3a4514f96a890310757a09fd77a3c70e931),
causing `docker push` to show the incorrect flag description.
This patch changes the flags to use the correct description
for `docker push`, and `docker plugin push`.
To prevent this confusion in future, the boolean argument
is removed, and a `AddTrustSigningFlags()` function is added.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix tries to address the enhancement discussed in 28735 to add
`--format` for the output of `docker plugin ls`.
This fix
1. Add `--format` and `--quiet` flags to `docker plugin ls`
2. Convert the current implementation to use `formatter`, consistent with
other docker list commands.
3. Add `pluginsFormat` for config.json.
Related docs has been updated.
Several unit tests have been added to cover the changes.
This fix is related to 28708 and 28735.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Issue #30082 demonstrated that their is possible confusion with the "/."
where the tailing "." can appear to be merely punctuation within the
document rather than a highly pertinent part of `SRC_PATH`.
Signed-off-by: Ian Campbell <ian.campbell@docker.com>
This fix adds a new flag `--availability` to `swarm join`.
Related documentation has been updated.
An integration test has been added.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 24596 where it was not
possible to join as manager only (`--availability=drain`).
This fix adds a new flag `--availability` to `swarm join`.
Related documentation has been updated.
An integration test has been added.
NOTE: Additional pull request for swarmkit and engine-api will
be created separately.
This fix fixes 24596.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is a follow up for comment
https://github.com/docker/docker/pull/28535#issuecomment-263215225
This fix provides `--filter until=<timestamp>` for `docker container/image prune`.
This fix adds `--filter until=<timestamp>` to `docker container/image prune`
so that it is possible to specify a timestamp and prune those containers/images
that are earlier than the timestamp.
Related docs has been updated
Several integration tests have been added to cover changes.
This fix fixes#28497.
This fix is related to #28535.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address issue raised in 25228 to support
multiple service IDs on `docker service ps`.
Multiple IDs are allowed with `docker service ps ...`, and
related documentation has been updated.
A test has been added to cover the changes.
This fix fixes 25228.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The `DOCKER_HIDE_LEGACY_COMMANDS` environment
variable was added in a7c8bcac2ba60d6dd25a1157085d9245bed556ce
but not documented.
This adds the variable to the documentation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: zhenghenghuo <zhenghenghuo@zju.edu.cn>
try to pass test
Signed-off-by: zhenghenghuo <zhenghenghuo@zju.edu.cn>
try to pass the test
Signed-off-by: zhenghenghuo <zhenghenghuo@zju.edu.cn>
In #28507 and #28885, `docker service/node ps -a` has been removed so that
information about slots are show up even without `-a` flag.
The output of `docker stack ps` reused the same output as `docker service/node ps`.
However, the `-a` was still there. It might make sense to remove `docker stack ps -a`
as well to bring consistency with `docker service/node ps`.
This fix is related to #28507, #28885, and #25983.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Move plugins to shared distribution stack with images.
Create immutable plugin config that matches schema2 requirements.
Ensure data being pushed is same as pulled/created.
Store distribution artifacts in a blobstore.
Run init layer setup for every plugin start.
Fix breakouts from unsafe file accesses.
Add support for `docker plugin install --alias`
Uses normalized references for default names to avoid collisions when using default hosts/tags.
Some refactoring of the plugin manager to support the change, like removing the singleton manager and adding manager config struct.
Signed-off-by: Tonis Tiigi <tonistiigi@gmail.com>
Signed-off-by: Derek McGowan <derek@mcgstyle.net>
When plugins have a positive refcount, they were not allowed to be
removed. However, plugins could still be disabled when volumes
referenced it and containers using them were running.
This change fixes that by enforcing plugin refcount during disable.
A "force" disable option is also added to ignore reference refcounting.
Signed-off-by: Anusha Ragunathan <anusha@docker.com>
This fix tries to address the issue raised in 29291 where
the output of `--replicas` in `service create/update`:
```
--replicas uint Number of tasks (default none)
```
is misleading. User might incorrectly assume the number of replicas
would be `0` (`none`) by default, while the actual default is `1`.
The issue comes from the fact that some of the default values are
from daemon and it is not possible for client to find out the default
value.
In this case, it might be better to just simply not displaying `(default none)`.
This fix returns "" for `Uint64Opt` so that `(default none)` is hidden.
In addition to `--replicas`, this fix also changes
`--restart-delay`, `--restart-max-attempts`, `--stop-grace-period`,
`--health-interval`, `--health-timeout`, and `--restart-window`
in a similiar fashion.
New Output:
```
--health-interval duration Time between running the check (ns|us|ms|s|m|h)
--health-timeout duration Maximum time to allow one check to run (ns|us|ms|s|m|h)
...
--replicas uint Number of tasks
...
--restart-delay duration Delay between restart attempts (ns|us|ms|s|m|h)
--restart-max-attempts uint Maximum number of restarts before giving up
--restart-window duration Window used to evaluate the restart policy (ns|us|ms|s|m|h)
...
--stop-grace-period duration Time to wait before force killing a container (ns|us|ms|s|m|h)
```
The docs has been updated. Note the docs for help output of `service create/update`
is out of sync with the current master. This fix replace with the update-to-date
help output.
This fix fixes 29291.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in 28581 and 28927
where it is not possible to create a secret from a file (only
through STDIN).
This fix add a flag `--file` to `docker secret create` so that
it is possible to create a secret from a file with:
```
docker secret create --file secret.in secret.name
```
or
```
echo TEST | docker secret create --file - secret.name
```
Related docs has been updated.
An integration test has been added to cover the changes.
This fix fixes 28581.
This fix is related to 28927.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
the "docker swarm leave" command description
mentioned that the command can only be used
for workers, however, the command can also
be used for managers (using the `-f` / `--force`
option).
this patch removes the "(workers only)" part
of the command description.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit bbd2018ee19eff5594ae3986bf56fbcd0044699d
changed the output format of `docker service ps`.
this patch updates the reference docs
to match the updated output format.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When inspecting a container, `NetworkSettings` contains top-level
information about the default ("bridge") network;
`EndpointID`, `Gateway`, `GlobalIPv6Address`, `GlobalIPv6PrefixLen`,
`IPAddress`, `IPPrefixLen`, `IPv6Gateway`, and `MacAddress`.
These properties are deprecated in favor of per-network properties in
`NetworkSettings.Networks`. These properties were already "deprecated" in
docker 1.9, but kept around for backward compatibility.
Refer to [#17538](https://github.com/docker/docker/pull/17538) for further
information.
This officially deprecates these properties, and marks them
for removal in 1.16
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Legacy plugins expect host-relative paths (such as for Volume.Mount).
However, a containerized plugin cannot respond with a host-relative
path. Therefore, this commit modifies new volume plugins' paths in Mount
and List to prepend the container's rootfs path.
This introduces a new PropagatedMount field in the Plugin Config.
When it is set for volume plugins, RootfsPropagation is set to rshared
and the path specified by PropagatedMount is bind-mounted with rshared
prior to launching the container. This is so that the daemon code can
access the paths returned by the plugin from the host mount namespace.
Signed-off-by: Tibor Vass <tibor@docker.com>
This fix tries to address the enhancement proposed in 28708 to display
ID field for the output of `docker plugin ls`.
This fix add `ID` field to the output of `docker plugin ls`
Related docs has been updated.
This fix fixes 28708.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the issue raised in discussion of
PR 28735 where it was not possible to manage plugin based on
plugin ID. Previously it was not possible to invoke
`docker plugin inspect` with a plugin ID (or ID prefix).
This fix updates the implementation of `docker plugin inspect`
so that it is possbile to search based on a plugin name, or a
plugin ID. A short format of plugin ID (prefix) is also possible,
as long as there is no ambiguity.
Previously the check of `docker plugin inspect` was mostly done
on the client side. This could potentially cause inconsistency
between API and CMD. This fix move all the checks to daemon side
so that API and CMD will be consistent.
An integration test has been added to cover the changes.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This commit reverts 273eeb813c1db0f42c2ad5e053972eeb00907568 (#26825).
For the discussion so far, please refer to #28527.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
`docker stack config` command does not exists anymore, removing it
from the command reference documentation.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Currently the help output of `docker network ls --filter` is:
```
Options:
-f, --filter value Provide filter values (i.e. 'dangling=true') (default [])
...
```
This caused confusion as only the following filters are supported at the moment:
- `driver`
- `type`
- `name`
- `id`
- `label`
This fix update the help output of `docker network ls --filter` and `network_ls.md`.
The `dangling=true` description has been replace to:
```
Options:
-f, --filter filter Provide filter values (i.e. 'driver=bridge')
...
```
This fix fixes 28786.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
The "--no-trunc" option toggles between showing/hiding
digests.
This updates the reference to show this difference.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
A recent PR added `(ns|us|ms|s|m|h)` to the descriptions of some
duration options, but not all. Add it to the remaining options for
consistency.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Adds section about the hub deprecating the v1 protocol.
Adds note about intent to disable by default and remove support.
Signed-off-by: Derek McGowan <derek@mcgstyle.net> (github: dmcgowan)
This fix updates docs for `docker info` for most recent changes.
It also made several chagnes:
1. Replace 0.12.0-dev to 0.13.0 for api docs v1.24.
2. Replace 0.13.0-dev to 0.13.0 for api docs v1.25
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This feature was reverted for docker 1.13
in c5251f7116e3d9095a7169fc31bd170dff997c2e,
so removing the documentation as well.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
… for `docker images`.
This deprecates the `filter` param for the `/images` endpoint and make a
new filter called `reference` to replace it. It does change the CLI
side (still possible to do `docker images busybox:musl`) but changes the
cli code to use the filter instead (so that `docker images --filter
busybox:musl` and `docker images busybox:musl` act the same).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
This fix tries to address 27902 by adding a flag `--host`
to `docker service create` and `--host-add/--host-rm` to
`docker service update`, so that it is possible to
specify extra `host:ip` settings in `/etc/hosts`.
This fix adds `Hosts` in swarmkit's `ContainerSpec` so that it
is possible to specify extra hosts during service creation.
Related docs has been updated.
An integration test has been added.
This fix fixes 27902.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This change incorporates feedback from @thaJeztah in the PR that added
the autolock flag. It changes the descriptions to be different for
"swarm init" and "swarm update" so that the boolean nature so that the
purpose of the flag in both contexts is clearer.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fix is a follow up to #27567 based on:
https://github.com/docker/docker/pull/27567#issuecomment-259295055
In #27567, `--dns-options` has been added to `service create/update`,
together with `--dns` and `--dns-search`. The `--dns-opt` was used
in `docker run`.
This fix add `--dns-option` (not `--dns-options`) to `docker run/create`, and hide
`--dns-opt`. It is still possible to use `--dns-opt` with
`docker run/create`, though it will not show up in help output.
This fix change `--dns-options`to --dns-option` for `docker service create`
and `docker service update`.
This fix also updates the docs and bash/zsh completion scripts.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is based on the comment:
https://github.com/docker/docker/pull/28147#discussion_r86996347
Previously the output string of the `DurationOpt` is `duration-ptr`
and `Uint64Opt` is `uint64-ptr`. While it is clear to developers,
for a normal user `-ptr` might not be very informative.
On the other hand, the default value of `DurationOpt` and `Uint64Opt`
has already been quite informative: `none`. That means if no flag
provided, the value will be treated as none.
(like a ptr with nil as the default)
For that reason this fix removes the `-ptr`.
Also, the output in the docs of `service create` has been quite
out-of-sync with the true output. So this fix updates the docs
to have the most up-to-date help output of `service create --help`.
This fix is related to #28147.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
See #21157 for more details.
In a future version of Docker, providing a version to API calls
will be mandatory. An implementation of this is in #27801.
Signed-off-by: Ben Firshman <ben@firshman.co.uk>
Add the following options to "swarm init" and "swarm update":
- --max-snapshots: Retain this many old Raft snapshots in addition
to the latest one
- --snapshot-interval: Number of log entries between Raft snapshots
These options already existed in SwarmKit and the Docker API but were
never exposed in the CLI. I'm adding them here to fix this oversight.
--max-snapshots may be useful for debugging purposes and more
conservative users who want to store rolling backups of old versions of
the Raft state.
--snapshot-interval is most useful for performance tuning. The default
value of 10000 may not be ideal for some setups.
There is also a LogEntriesForSlowFollowers option that is not exposed. I
decided not to expose it along with these others because I don't think
it's generally useful (and I'm not sure what I would call the CLI flag).
But if people want, I can expose it for the sake of completeness.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fix adds `--dns-add`, `--dns-rm`, `--dns-opt-add`, `--dns-opt-rm`,
`--dns-search-add` and `--dns-search-rm` to `service update`.
An integration test and a unit test have been added to cover the changes in this fix.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to fix the issue raised in 24391 about allowing
custom DNS settings to service definition.
This fix adds `DNSConfig` (`Nameservers`, `Options`, `Search`) to
service definition, as well as `--dns`, `--dns-opt`, and `dns-search`
to `service create`.
An integration test has been added to cover the changes in this fix.
This fix fixes 24391.
A PR in swarmkit will be created separately.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix is based on the comment in
https://github.com/docker/docker/pull/27567#discussion_r86910604
Basically, in the help output of `docker service update`, the `--xxx-add`
flags typically have plural forms while `--xxx-rm` flags have singular
forms.
This fix updates the help output for consistency.
This fix also updates the related docs in `service_update.md`.
The help output in `service_update.md` has been quite out-of-sync
with the actual output so this fix replaces the output with the
most up-to-date output.
This fix is related to #27567.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to add `--tty` to `docker service create/update`. As was
specified in 25644, `TTY` flag has been added to SwarmKit and is
already vendored.
This fix add `--tty` to `docker service create/update`.
Related document has been updated.
Additional integration tests has been added.
This fix fixes 25644.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
PR 24978 adds hint of of progress to the output of `docker build`
for 1.13, in the format of
```
Step 1/5 ...
...
Step 2/5 ...
...
```
Though some of the docs hasn't been updated.
This fix did a grep in docs and updated the related places.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This fix tries to address the proposal raised in 27921 and add
`--cpus` flag for `docker run/create`.
Basically, `--cpus` will allow user to specify a number (possibly partial)
about how many CPUs the container will use. For example, on a 2-CPU system
`--cpus 1.5` means the container will take 75% (1.5/2) of the CPU share.
This fix adds a `NanoCPUs` field to `HostConfig` since swarmkit alreay
have a concept of NanoCPUs for tasks. The `--cpus` flag will translate
the number into reused `NanoCPUs` to be consistent.
This fix adds integration tests to cover the changes.
Related docs (`docker run` and Remote APIs) have been updated.
This fix fixes 27921.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Manager now auto-detects the address that an agent connects to the cluster
from and stores it. This is useful for many kinds of internal cluster
management tools.
Signed-off-by: Drew Erny <drew.erny@docker.com>
As for `ps`, `images`, `network ls` and `volume ls`, this makes it
possible to define a custom default format.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Allow built images to be squash to scratch.
Squashing does not destroy any images or layers, and preserves the
build cache.
Introduce a new CLI argument --squash to docker build
Introduce a new param to the build API endpoint `squash`
Once the build is complete, docker creates a new image loading the diffs
from each layer into a single new layer and references all the parent's
layers.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
If user namespaces is enabled on the daemon, reveal that via docker info
by adding "userns" to the list of security options reported by the
info endpoint.
Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com>
It seems that `max-concurrent-downloads` and `max-concurrent-uploads`
are supported in Windows for `config.json`. Though that was not
mentioned in the docs for dockerd.md.
This fix adds the following to the example `config.json` file for Windows:
```
"max-concurrent-downloads": 3,
"max-concurrent-uploads": 5,
```
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
--group-add was used for specifying groups for both service create
and service update. For create it was confusing since we don't have
an existing set of groups. Instead I added --group to create, and
moved --group-add to service update only, like --group-rm
This deals with issue 27646
Signed-off-by: Lily Guo <lily.guo@docker.com>
Update flag documentation
Specify that --group, --group-add and --groupd-rm refers to
supplementary user groups
Signed-off-by: Lily Guo <lily.guo@docker.com>
Fix docs for groups and update completion scripts
Signed-off-by: Lily Guo <lily.guo@docker.com>
A HealthConfig entry was added to the ContainerSpec associated with the
service being created or updated.
Signed-off-by: Cezar Sa Espinola <cezarsa@gmail.com>
The --name flag was inadvertently added to
docker service update, but is not supported,
as it has various side-effects (e.g., existing
tasks are not renamed).
This removes the flag from the service update
command.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fix tries to address the issue in 24712 and add
`--env-file` file to `docker create service`.
Related documentation has been updated.
An additional integration has been added.
This fix fixes 24712.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
containers may specify these cgroup values at runtime. This will allow
processes to change their priority to real-time within the container
when CONFIG_RT_GROUP_SCHED is enabled in the kernel. See #22380.
Also added sanity checks for the new --cpu-rt-runtime and --cpu-rt-period
flags to ensure that that the kernel supports these features and that
runtime is not greater than period.
Daemon will support a --cpu-rt-runtime flag to initialize the parent
cgroup on startup, this prevents the administrator from alotting runtime
to docker after each restart.
There are additional checks that could be added but maybe too far? Check
parent cgroups to ensure values are <= parent, inspecting rtprio ulimit
and issuing a warning.
Signed-off-by: Erik St. Martin <alakriti@gmail.com>
`docker network prune` prunes unused networks, including overlay ones.
`docker system prune` also prunes unused networks.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
The following sentences (introduced in v1.11 via #21160) were misleading for Swarm mode services (>= v1.12)
For networks backed by multi-host network driver, such as Overlay,
this command also shows the container endpoints in other hosts in the
cluster. These endpoints are represented as "ep-{endpoint-id}" in the output.
Signed-off-by: Akihiro Suda <suda.akihiro@lab.ntt.co.jp>
This fix tries to address the issue raised in 24392 where
labels with duplicate keys exist in `docker info`, which
contradicts with the specifications in the docs.
The reason for duplicate keys is that labels are stored as
slice of strings in the format of `A=B` (and the input/output).
This fix tries to address this issue by checking conflict
labels when daemon started, and remove duplicate labels (K-V).
The existing `/info` API has not been changed.
An additional integration test has been added to cover the
changes in this fix.
This fix fixes 24392.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Currently, there's no way to restart the tasks of a service without
making an actual change to the service. This leads to us giving awkward
workarounds as in
https://github.com/docker/docker.github.io/pull/178/files, where we tell
people to scale a service up and down to restore balance, or make
unnecessary changes to trigger a restart.
This change adds a --force option to "docker service update", which
forces the service to be updated even if no changes require that.
Since rolling update parameters are respected, the user can use
"docker service --force" to do a rolling restart. For example, the
following is supported:
docker service update --force --update-parallelism 2 \
--update-delay 5s myservice
Since the default value of --update-parallelism is 1, the default
behavior is to restart the service one task at a time.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Passing {{.Networks}} to the format parameter will prompt ps to
display all the networks the container is connected to.
Signed-off-by: Kenfe-Mickael Laventure <mickael.laventure@gmail.com>
Keeping the current behavior for exec, i.e., inheriting
variables from main process. New variables will be added
to current ones. If there's already a variable with that
name it will be overwritten.
Example of usage: docker exec -it -e TERM=vt100 <container> top
Closes#24355.
Signed-off-by: Jonh Wendell <jonh.wendell@redhat.com>
This fix tries to add a daemon config parameter `--shutdown-timeout`
that specifies the timeout value to stop containers gracefully
(before SIGKILL). The default value is 15s.
The `--shutdown-timeout` parameter is added to daemon options and
config file. It will also be updated during daemon reload.
Additional test cases have been added to cover the change.
This fix fixes#22471.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
This adds support for two enhancements to swarm service rolling updates:
- Failure thresholds: In Docker 1.12, a service update could be set up
to either pause or continue after a single failure occurs. This adds
an --update-max-failure-ratio flag that controls how many tasks need to
fail to update for the update as a whole to be considered a failure. A
counterpart flag, --update-monitor, controls how long to monitor each
task for a failure after starting it during the update.
- Rollback flag: service update --rollback reverts the service to its
previous version. If a service update encounters task failures, or
fails to function properly for some other reason, the user can roll back
the update.
SwarmKit also has the ability to roll back updates automatically after
hitting the failure thresholds, but we've decided not to expose this in
the Docker API/CLI for now, favoring a workflow where the decision to
roll back is always made by an admin. Depending on user feedback, we may
add a "rollback" option to --update-failure-action in the future.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This fix tries to add a flag `--stop-timeout` to specify the timeout value
(in seconds) for the container to stop before SIGKILL is issued. If stop timeout
is not specified then the default timeout (10s) is used.
Additional test cases have been added to cover the change.
This fix is related to #22471. Another pull request will add `--shutdown-timeout`
to daemon for #22471.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Allow passing --storage-opt size=X to docker create/run commands
for the `overlay2` graphriver.
The size option is only available if the backing fs is xfs that is
mounted with the `pquota` mount option.
The user can pass any size less then the backing fs size.
Signed-off-by: Amir Goldstein <amir73il@aquasec.com>
Fedora 22 reached end of life on July 19th, and
will no longer receive updates;
https://fedoramagazine.org/fedora-22-end-of-life-2016-july/
With the recent release of Fedora 24, Fedora 22 will officially enter End Of
Life (EOL) status on July 19th, 2016. After July 19th, all packages in the
Fedora 22 repositories will no longer receive security, bugfix, or enhancement
updates, and no new packages will be added to the Fedora 22 collection.
Upgrading to Fedora 23 or Fedora 24 before July 19th 2016 is highly recommended
for all users still running Fedora 22.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Some frontmatter such as the weights, menu stuff, etc is no longer used
'draft=true' becomes 'published: false'
Signed-off-by: Misty Stanley-Jones <misty@docker.com>
This information was added in
1efc940e6f547760e5e8f4648acb120ff19fdc58,
but removed again in
a271eaeba224652e3a12af0287afbae6f82a9333
to make the help-output fit in a 80-chars
terminal.
This adds the available options again
in the help output, and updates the CLI
reference documentation to match actual
output.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Linux kernel 4.3 and later supports "ambient capabilities" which are the
only way to pass capabilities to containers running as a non root uid.
Previously there was no way to allow containers not running as root
capabilities in a useful way.
Fix#8460
Signed-off-by: Justin Cormack <justin.cormack@docker.com>
Sebastiaan van Stijn
Denis Defreyne
Michael Friis
Dong Chen
Harald Albers
yuexiao-wang
Flavio Crisciani
Julien Kassar
Boaz Shuster
Julien Maitrehenry
Antonio Murdaca
Alvin Deng
Jeremy Chambers
Yong Tang
Joao Fernandes
Daniel Nephin
Aaron Lehmann
Drew Erny
Alfred Landrum
Arash Deshmeh
Vincent Demeester
Brian Goff
Mike Casas
Tonis Tiigi
Victor Vieux
Elias Faxö
Akihiro Suda
Misty Stanley-Jones
Karthik Nayak
徐俊杰
Sebastiaan van Stijn
Josh Hawn
JimGalasyn
Ian Philpot
David Xia
allencloud
Greg Pflaum
EG Noriega
erxian
Alessandro Boch
uhayate
Anusha Ragunathan
Foysal Iqbal
John Maguire
Wayne Song
Dave Tucker
Jeremy Yallop
Jimmy Song
Ricardo N Feliciano
Misty Stanley-Jones
Remy Suen
French Ben
Santhosh Manohar
John Laswell
Keith Hudgins
scjane
pjaffe
Tony Abboud
yupengzte
Zhang Wei
Daniel Zhang
Kenfe-Mickael Laventure
Tianon Gravi
Nathan LeClaire
Lewis Daly
John Howard
Ma Shimiao
John Mulhausen
David Williamson
jroenf
Janonymous
Timothy Hobbs
Michael Irwin
Tibor Vass
Yanqiang Miao
Ian Campbell
Victor Vieux
ttronicum
Ovidio Mallo
zhenghenghuo
Anusha Ragunathan
Victoria Bialas
Hongbin Lu
liwenqi
lixiaobing10051267
Michael
Trapier Marshall
Qinglan Peng
Kei Ohmura
Jake Sanders
Chris Gavin
dattatrayakumbhar04
cyli
Jacob Tomlinson
Ben Firshman
Derek McGowan
bbayani
Riyaz Faizullabhoy
Andrea Luzzardi
Steve Durrheimer
Evan Hazlett
milindchawre
Alicia Lauerman
Josh Horwitz
Darren Stahl
Nikolay Milovanov
Gaetan de Villele
Michael Crosby
Addam Hardy
Qiang Huang
Josh Horwitz
Phil Estes
Lily Guo
Cezar Sa Espinola
Ce Gao
Erik St. Martin
Leo Gallucci
sandyskies
Jonh Wendell
Ding Fei
Luca Favatella
Amir Goldstein
Alicia Lauerman
Justin Cormack