Extra hosts (`extra_hosts` in compose-file, or `--hosts` in services) adds
custom host/ip mappings to the container's `/etc/hosts`.
The current implementation used a `map[string]string{}` as intermediate
storage, and sorted the results alphabetically when converting to a service-spec.
As a result, duplicate hosts were removed, and order of host/ip mappings was not
preserved (in case the compose-file used a list instead of a map).
According to the **host.conf(5)** man page (http://man7.org/linux/man-pages/man5/host.conf.5.html)
multi Valid values are on and off. If set to on, the resolver
library will return all valid addresses for a host that
appears in the /etc/hosts file, instead of only the first.
This is off by default, as it may cause a substantial
performance loss at sites with large hosts files.
Multiple entries for a host are allowed, and even required for some situations,
for example, to add mappings for IPv4 and IPv6 addreses for a host, as illustrated
by the example hosts file in the **hosts(5)** man page (http://man7.org/linux/man-pages/man5/hosts.5.html):
# The following lines are desirable for IPv4 capable hosts
127.0.0.1 localhost
# 127.0.1.1 is often used for the FQDN of the machine
127.0.1.1 thishost.mydomain.org thishost
192.168.1.10 foo.mydomain.org foo
192.168.1.13 bar.mydomain.org bar
146.82.138.7 master.debian.org master
209.237.226.90 www.opensource.org
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
This patch changes the intermediate storage format to use a `[]string`, and only
sorts entries if the input format in the compose file is a mapping. If the input
format is a list, the original sort-order is preserved.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `--host-add` flag adds a new `host:ip` mapping. Even though
adding an entry is idempotent (adding the same mapping multiple
times does not update the service's definition), it does not
_update_ an existing mapping with a new IP-address (multiple
IP-addresses can be defined for a host).
This patch removes the "or update" part from the flag's
description.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
and enable the new WarnUnmatchedDirective to warn if a nolint is unnecessary.
remove some unnecessary nolint
Signed-off-by: Daniel Nephin <dnephin@docker.com>
When deploying a stack from a compose file, the output did not show
that a secret or config was created. This patch adds messages for these.
Create a configuration file and compose file:
$ cat > config.yml <<EOF
hello: world
EOF
$ cat > secret.txt <<EOF
p@ssw0rd
EOF
$ cat > docker-compose.yml <<EOF
version: "3.3"
services:
test:
image: nginx:alpine
configs:
- source: myconfig
target: /my-config.yml
secrets:
- source: mysecret
target: /my-secret.txt
configs:
myconfig:
file: ./config.yml
secrets:
mysecret:
file: ./secret.txt
EOF
Before this patch is applied:
$ docker stack deploy -c docker-compose.yml example
Creating network example_default
Creating service example_test
After this patch is applied:
$ docker stack deploy -c docker-compose.yml example
Creating network example_default
Creating secret example_mysecret
Creating config example_myconfig
Creating service example_test
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Running `docker service ps --quiet` should print the
full, non-truncated ID, even if the `--no-trunc` option
is not set.
This patch disables truncation if the `--quiet` flag
is set.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `docker container stats` output has a column (`CONTAINER`), that shows either
the container _id_ or container _name_, depending on the arguments given.
For example, running `docker container stats foobar` shows:
CONTAINER CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
foobar 0.00% 1.938MiB / 1.952GiB 0.10% 782B / 0B 4.11MB / 0B 2
Whereas `docker container stats 67b2525d8ad1` (`67b2525d8ad1` being the ID for
container `foobar`) shows:
CONTAINER CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
67b2525d8ad1 0.00% 1.938MiB / 1.952GiB 0.10% 916B / 0B 4.11MB / 0B 2
This behavior is confusing.
This patch updates the default output format for `docker stats` to use separate
columns for container ID and container Name (similar to `docker container ls`).
With this patch applied, both commands show the same output:
$ docker container stats foobar
CONTAINER ID NAME CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
67b2525d8ad10bb236a49960e93c09993b0baabeef12c2d46cd5f4fbb6f4808c foobar 0.00% 1.938MiB / 1.952GiB 0.10% 1.25kB / 0B 4.11MB / 0B 2
$ docker container stats 67b2525d8ad1
CONTAINER ID NAME CPU % MEM USAGE / LIMIT MEM % NET I/O BLOCK I/O PIDS
67b2525d8ad10bb236a49960e93c09993b0baabeef12c2d46cd5f4fbb6f4808c foobar 0.00% 1.938MiB / 1.952GiB 0.10% 1.31kB / 0B 4.11MB / 0B 2
Users that want to use the old format can configure a custom format in the
cli configuration file (`~/.docker/config.json`);
on Linux:
{
"statsFormat" : "table {{.Container}}\t{{.CPUPerc}}\t{{.MemUsage}}\t{{.MemPerc}}\t{{.NetIO}}\t{{.BlockIO}}\t{{.PIDs}}"
}
on Windows:
{
"statsFormat" : "table {{.Container}}\t{{.CPUPerc}}\t{{.MemUsage}}\t{{.NetIO}}\t{{.BlockIO}}"
}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The update includes bug fixes in gometalinter and updates to linters, which
discovered more linter problems.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Commit 330a0035334871d92207b583c1c36d52a244753f added a `--detach=false` option
to various service-related commands, with the intent to make this the default in
a future version (17.09).
This patch changes the default to use "interactive" (non-detached), allowing
users to override this by setting the `--detach` option.
To prevent problems when connecting to older daemon versions (17.05 and below,
see commit db60f25561), the detach option is
ignored for those versions, and detach is always true.
Before this change, a warning was printed to announce the upcoming default:
$ docker service create nginx:alpine
saxiyn3pe559d753730zr0xer
Since --detach=false was not specified, tasks will be created in the background.
In a future release, --detach=false will become the default.
After this change, no warning is printed, but `--detach` is disabled;
$ docker service create nginx:alpine
y9jujwzozi0hwgj5yaadzliq6
overall progress: 1 out of 1 tasks
1/1: running [==================================================>]
verify: Service converged
Setting the `--detach` flag makes the cli use the pre-17.06 behavior:
$ docker service create --detach nginx:alpine
280hjnzy0wzje5o56gr22a46n
Running against a 17.03 daemon, without specifying the `--detach` flag;
$ docker service create nginx:alpine
kqheg7ogj0kszoa34g4p73i8q
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Some mild refactoring of the docker info command;
- Use `fmt.Fprinln()` instead of `fmt.Fprintf()` where possible
- Rename `fprintfIfNotEmpty()` to `fprintlnNonEmpty()`, and removed
return variables, because they were not used. `fprintlnNonEmpty()`
now uses fmt.Fprintln()` instead of `fmt.Fprintf()`, because
formatting was not used.
- Use `fprintlnNonEmpty()` to get rid of some `if` statements
- Extract printing Swarm-related information to a `printSwarmInfo()` function
- Change `Http Proxy` and `Https Proxy` to `HTTP Proxy` / `HTTPS Proxy`
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: French Ben <frenchben@docker.com>
Update for the test to capture the proper removal
Signed-off-by: French Ben <frenchben@docker.com>
Satisfy lint length limit
Signed-off-by: French Ben <frenchben@docker.com>
Updated e2e test
Signed-off-by: French Ben <frenchben@docker.com>
To keep on a consistent behaviour such as in docker-service-ps
if docker-stack-ps didn't find a given stack, the command line
should exit with exit code 1.
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
This patch fixes the following bug:
Running "docker image ls --digests" will add images digests
to the image table. However, when using "format" to display
images digests all of them are "<none>".
Signed-off-by: Boaz Shuster <ripcurld.github@gmail.com>
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Implement runRollback to not use runUpdate
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Add version tag and add flag quiet to suppress progress output
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Removed flags from warnDetachDefault
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Used command.Cli interface
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Add detach flag on rollback command
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Create a fakeClient for service commands
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Added unit test for rollback command
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Used command.Cli interface instead of *command.DockerCli in service commands
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Revert "Removed flags from warnDetachDefault"
This reverts commit 3e4f601c8a82cc2599a755dc693409bbc47917fc.
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Fixed test.NewFakeCli instanciation
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Removed unused receiver
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Replaced cli by dockerCli
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Revert "Removed unused receiver"
This reverts commit 604ef7c13df3d019949ca81d992db501114dafce.
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Fixed last typo
Signed-off-by: Jimmy Leger <jimmy.leger@gmail.com>
Riyaz Faizullabhoy
Kyle Spiers
Ashwini Oruganti
Sebastiaan van Stijn
Daniel Nephin
Sebastiaan van Stijn
Chao Wang
Daniel Nephin
Brian Goff
Stephen J Day
Vincent Demeester
allencloud
Sébastien HOUZÉ
Victor Vieux
Liron Levin
Simon Ferquel
French Ben
Boaz Shuster
khaled souf
Ying Li
Tibor Vass
Marco Mariani
Christophe Vidal
Jimmy Leger