- Handle `bundlefile` directly in the `top-level`
command. `bundlefile` is still experimental and will be deprecated
in future version — this should make be easier to remove it.
- Validate the `stack` name in all cases (i.e. whatever the
orchestrator is used)
- Load the composefile ahead of choosing the orchestrator. This
removes some slight duplication.
- Makes `RunDeploy` easier to use from outside packages (like
`docker/app`) with a preloaded configuration.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
- Add the possibility to skip interpolation
- Add the possibility to skip schema validation
- Allow customizing the substitution function, to add special cases.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
> Run an init inside the container that forwards signals and reaps
processes
This is supported on `run` and now on Swarm services too, so it's also
possible to have in on a composefile :).
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
That field is automaticaly populated with any `x-*` field in the yaml.
And marshalling the compose config struct put them back into place.
This make it possible to get those extra fields without re-inventing
the wheel (i.e. reimplementing 80% of the `cli/compose/*` packages.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
The output of this information can be confusing,
so removing until we have a better design for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Renaming DOCKER_ORCHESTRATOR to DOCKER_STACK_ORCHESTRATOR
* Renaming config file option "orchestrator" to "stackOrchestrator"
* "--orchestrator" flag is no more global but local to stack command and subcommands
* Cleaning all global orchestrator code
* Replicating Hidden flags in help and Supported flags from root command to stack command
Signed-off-by: Silvin Lubecki <silvin.lubecki@docker.com>
Unfortunately, this is for now the only way to see the output of RUN commands when using buildkit.
It is equivalent to `DOCKER_BUILDKIT=1 docker build . 2>&1 | cat`
Signed-off-by: Tibor Vass <tibor@docker.com>
With this patch the following become true even with buildkit enabled:
1. `docker build -q .` only outputs the created image's sha256 ID.
2. `docker build -q .` outputs as if no `-q` was specified, if error occurred
3. `docker build . &> out` outputs JSON (instead of TTY characters)
Signed-off-by: Tibor Vass <tibor@docker.com>
This commit brings a more pedantic change in the following ambiguous case:
cat Dockerfile | docker build -f otherDockerfile -
The legacy builder does not error out and prefers the Dockerfile from stdin
while the buildkit-based one errors out.
Note that this is only in the case where stdin is a Dockerfile (not an archive)
Signed-off-by: Tibor Vass <tibor@docker.com>
* Kubernetes native filtering (server side) is an exact match, now filtering on name is made client-side to add prefix-matching
Signed-off-by: Silvin Lubecki <silvin.lubecki@docker.com>
This patch adds annotations to mark the checkpoint commands as Linux only, which
hides them if the daemon is running a non-matching operating-system type;
Before:
docker
Usage: docker COMMAND
A self-sufficient runtime for containers
...
Management Commands:
config Manage Docker configs
container Manage containers
image Manage images
After:
docker
Usage: docker COMMAND
A self-sufficient runtime for containers
...
Management Commands:
checkpoint Manage checkpoints
config Manage Docker configs
container Manage containers
image Manage images
This change also prints errors when attempting to use checkpoint commands or
flags if the feature is not supported by the Daemon's operating system;
$ docker checkpoint --help
docker checkpoint is only supported on a Docker daemon running on linux, but the Docker daemon is running on windows
$ docker checkpoint create --help
docker checkpoint create is only supported on a Docker daemon running on linux, but the Docker daemon is running on windows
$ docker checkpoint ls --help
docker checkpoint ls is only supported on a Docker daemon running on linux, but the Docker daemon is running on windows
$ docker checkpoint rm --help
docker checkpoint rm is only supported on a Docker daemon running on linux, but the Docker daemon is running on windows
$ docker container start --checkpoint=foo mycontainer
"--checkpoint" requires the Docker daemon to run on linux, but the Docker daemon is running on windows
$ docker container start --checkpoint-dir=/foo/bar mycontainer
"--checkpoint-dir" requires the Docker daemon to run on linux, but the Docker daemon is running on windows
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fixes the help template so that if a command
includes a Long form help message that is displayed instead
of ignoring it and always showing the Short message.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
As for top-level key, any 3rd-level key which starts with `x-` will be
ignored by compose. This allows for users to:
* include additional metadata in their compose files
* create YAML anchor objects that can be re-used in other parts of the config
This matches a similar feature in the swagger spec definition:
https://swagger.io/specification/#specificationExtensions
This means a composefile like the following is valid
```
verison: "3.7"
services:
foo:
image: foo/bar
x-foo: bar
network:
bar:
x-bar: baz
```
It concerns services, volumes, networks, configs and secrets.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Add validation for stack names to prevent an empty name resulting in _all_
stacks to be returned after filtering, which can result in removal of services
for all stacks if `--prune`, or `docker stack rm` is used.
Before this change;
docker stack deploy -c docker-compose.yml one
docker stack deploy -c docker-compose.yml two
docker stack deploy -c docker-compose.yml three
docker stack deploy -c docker-compose.yml --prune ''
Removing service one_web
Removing service two_web
Removing service three_web
After this change:
docker stack deploy -c docker-compose.yml one
docker stack deploy -c docker-compose.yml two
docker stack deploy -c docker-compose.yml three
docker stack deploy -c docker-compose.yml --prune ''
invalid stack name: ""
Other stack commands were updated as well:
Before this change;
docker stack deploy -c docker-compose.yml ''
Creating network _default
failed to create network _default: Error response from daemon: rpc error: code = InvalidArgument desc = name must be valid as a DNS name component
docker stack ps ''
nothing found in stack:
docker stack rm ''
Removing service one_web
Removing service three_web
Removing service two_web
After this change:
docker stack deploy -c docker-compose.yml ''
invalid stack name: ""
docker stack ps ''
invalid stack name: ""
docker stack rm ''
invalid stack name: ""
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Don't wrap the code to be slightly more readable
- Rename `getServiceFilter()` to `getStackServiceFilter()` to be
consistent with other helper functions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
* Add "kubernetes" struct in config file with "allNamespaces" option, to opt-out this behavior when set as "disabled"
Signed-off-by: Mathieu Champlon <mathieu.champlon@docker.com>
`docker stack services --filter=label=foo=bar --filter=label=foo=baz my-stack` with Swarm gets handled as `filter on (a label named foo with value bar) AND (a label named foo with value baz).
This obviously yields an empty result set every time, but if and how this should be changed is out of scope here, so simply align Kubernetes with Swarm for now.
Signed-off-by: Mathieu Champlon <mathieu.champlon@docker.com>
Before this change:
----------------------------------------------------
Create a service with reservations and limits for memory and cpu:
docker service create --name test \
--limit-memory=100M --limit-cpu=1 \
--reserve-memory=100M --reserve-cpu=1 \
nginx:alpine
Verify the configuration
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
}
}
Update just CPU limit and reservation:
docker service update --limit-cpu=2 --reserve-cpu=2 test
Notice that the memory limit and reservation is not preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000
},
"Reservations": {
"NanoCPUs": 2000000000
}
}
Update just Memory limit and reservation:
docker service update --limit-memory=200M --reserve-memory=200M test
Notice that the CPU limit and reservation is not preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"MemoryBytes": 209715200
},
"Reservations": {
"MemoryBytes": 209715200
}
}
After this change:
----------------------------------------------------
Create a service with reservations and limits for memory and cpu:
docker service create --name test \
--limit-memory=100M --limit-cpu=1 \
--reserve-memory=100M --reserve-cpu=1 \
nginx:alpine
Verify the configuration
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
}
}
Update just CPU limit and reservation:
docker service update --limit-cpu=2 --reserve-cpu=2 test
Confirm that the CPU limits/reservations are updated, but memory limit and reservation are preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 2000000000,
"MemoryBytes": 104857600
}
}
Update just Memory limit and reservation:
docker service update --limit-memory=200M --reserve-memory=200M test
Confirm that the Mempry limits/reservations are updated, but CPU limit and reservation are preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000,
"MemoryBytes": 209715200
},
"Reservations": {
"NanoCPUs": 2000000000,
"MemoryBytes": 209715200
}
}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This patch hides the [flags] in the usage output of commands, using the
new `.DisableFlagsInUseLine` option, instead of the temporary workaround
added in 8e600e10f7
Before this change:
docker run
"docker run" requires at least 1 argument.
See 'docker run --help'.
Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...] [flags]
Run a command in a new container
After this change:
docker run
"docker run" requires at least 1 argument.
See 'docker run --help'.
Usage: docker run [OPTIONS] IMAGE [COMMAND] [ARG...]
Run a command in a new container
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `docker version` output now uses a tabwriter, so use single
tabs to print the output.
Before this change:
Server:
Engine:
Version: 18.05.0-ce
API version: 1.37 (minimum version 1.12)
Go version: go1.10.1
Git commit: f150324
Built: Wed May 9 22:20:16 2018
OS/Arch: linux/amd64
Experimental: true
Kubernetes:
Version: v1.9.6
StackAPI: v1beta2
After this change:
Server:
Engine:
Version: 18.05.0-ce
API version: 1.37 (minimum version 1.12)
Go version: go1.10.1
Git commit: f150324
Built: Wed May 9 22:20:16 2018
OS/Arch: linux/amd64
Experimental: true
Kubernetes:
Version: v1.9.6
StackAPI: v1beta2
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Switch from x/net/context to context made "go vet" see the previously
unseen errors:
> cli/command/container/start.go:57::error: the cancelFun function is
> not used on all paths (possible context leak) (vet)
> cli/command/container/start.go:63::error: this return statement may be
> reached without using the cancelFun var defined on line 57 (vet)
> cli/command/container/run.go:159::error: the cancelFun function is not
> used on all paths (possible context leak) (vet)
> cli/command/container/run.go:164::error: this return statement may be
> reached without using the cancelFun var defined on line 159 (vet)
Do call the cancel function.
Note we might end up calling it twice which is fine as long as I can see
from the Go 1.10 source code.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Since go 1.7, "context" is a standard package. Since go 1.9,
x/net/context merely provides some types aliased to those in
the standard context package.
The changes were performed by the following script:
for f in $(git ls-files \*.go | grep -v ^vendor/); do
sed -i 's|golang.org/x/net/context|context|' $f
goimports -w $f
for i in 1 2; do
awk '/^$/ {e=1; next;}
/\t"context"$/ {e=0;}
{if (e) {print ""; e=0}; print;}' < $f > $f.new && \
mv $f.new $f
goimports -w $f
done
done
[v2: do awk/goimports fixup twice]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Removing a host by `<host>:<ip>` should only remove occurences of the host with
a matching IP-address, instead of removing all entries for that host.
In addition, combining `--host-rm` and `--host-add` for the same host should
result in the new host being added.
This patch fixes the way the diff is calculated to allow combining
removing/adding, and to support entries having both a canonical, and aliases.
Aliases cannot be added by the CLI, but are supported in the Service spec, thus
should be taken into account:
Entries can be removed by either a specific `<host-name>:<ip-address>`
mapping, or by `<host>` alone:
- If both IP-address and host-name is provided, only remove the hostname
from entries that match the given IP-address.
- If only a host-name is provided, remove the hostname from any entry it
is part of (either as _canonical_ host-name, or as _alias_).
- If, after removing the host-name from an entry, no host-names remain in
the entry, the entry itself should be removed.
For example, the list of host-entries before processing could look like this:
hosts = &[]string{
"127.0.0.2 host3 host1 host2 host4",
"127.0.0.1 host1 host4",
"127.0.0.3 host1",
"127.0.0.1 host1",
}
Removing `host1` removes every occurrence:
hosts = &[]string{
"127.0.0.2 host3 host2 host4",
"127.0.0.1 host4",
}
Whereas removing `host1:127.0.0.1` only remove the host if the IP-address matches:
hosts = &[]string{
"127.0.0.2 host3 host1 host2 host4",
"127.0.0.1 host4",
"127.0.0.3 host1",
}
Before this patch:
$ docker service create --name my-service --host foo:127.0.0.1 --host foo:127.0.0.2 --host foo:127.0.0.3 nginx:alpine
$ docker service update --host-rm foo:127.0.0.1 --host-add foo:127.0.0.4 my-service
$ docker service inspect --format '{{.Spec.TaskTemplate.ContainerSpec.Hosts}}' my-service
[]
After this patch is applied:
$ docker service create --name my-service --host foo:127.0.0.1 --host foo:127.0.0.2 --host foo:127.0.0.3 nginx:alpine
$ docker service update --host-rm foo:127.0.0.1 --host-add foo:127.0.0.5 my-service
$ docker service inspect --format '{{.Spec.TaskTemplate.ContainerSpec.Hosts}}' my-service
[127.0.0.2 foo 127.0.0.3 foo 127.0.0.4 foo]
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "update" and "rollback" configurations were cross-wired, as a result, setting
`--rollback-*` options would override the service's update-options.
Creating a service with both update, and rollback configuration:
docker service create \
--name=test \
--update-failure-action=pause \
--update-max-failure-ratio=0.6 \
--update-monitor=3s \
--update-order=stop-first \
--update-parallelism=3 \
--rollback-failure-action=continue \
--rollback-max-failure-ratio=0.5 \
--rollback-monitor=4s \
--rollback-order=start-first \
--rollback-parallelism=2 \
--tty \
busybox
Before this change:
docker service inspect --format '{{json .Spec.UpdateConfig}}' test \
&& docker service inspect --format '{{json .Spec.RollbackConfig}}' test
Produces:
{"Parallelism":3,"FailureAction":"pause","Monitor":3000000000,"MaxFailureRatio":0.6,"Order":"stop-first"}
{"Parallelism":3,"FailureAction":"pause","Monitor":3000000000,"MaxFailureRatio":0.6,"Order":"stop-first"}
After this change:
{"Parallelism":3,"FailureAction":"pause","Monitor":3000000000,"MaxFailureRatio":0.6,"Order":"stop-first"}
{"Parallelism":2,"FailureAction":"continue","Monitor":4000000000,"MaxFailureRatio":0.5,"Order":"start-first"}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This ensures Windows paths are handled correctly as explained in the path package documentation.
Signed-off-by: Mathieu Champlon <mathieu.champlon@docker.com>
It will be helpful to expose the pull implementation which supports
pulling private images for other CLI commands that rely on helper images.
Signed-off-by: Daniel Hiltgen <daniel.hiltgen@docker.com>
When creating manifest lists, don't use "*" as the permission when
creating the token handler. This causes problems with gitlab's repos.
Fixes https://github.com/docker/cli/issues/1010
Signed-off-by: Christy Norman <christy@linux.vnet.ibm.com>
- Some of them don't make sense anymore
- Some are deprecated and removed from the engine since a few versions
already.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
… and other cases too. Updating mergo fixes the bugs (but introduced a
slight behaviour change that had to be fixed too)
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
When updating a service with the `--force` option, the `ForceUpdate`
property of the taskspec is incremented.
Stack deploy did not take this into account, and reset this
field to its default value (0), causing the service to be
re-deployed.
This patch copies the existing value before updating the service.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
> HasAvailableFlags checks if the command contains any flags (local
> plus persistent from the entire structure) which are not hidden or
> deprecated.
This fix the `--help` display when the `Options` is empty (but
showing), like on `docker trust key`
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
- `replaceDockerfileForContentTrust` is only used when content trust is
enabled, so remove the boolean.
- rename `isContentTrustEnabled` to `contentTrustEnabled`
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Some of them are skipped for now (because the feature is not supported
or needs more work), some of them are fixed.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Fix tests that failed when using cmp.Compare()
internal/test/testutil/assert
InDelta
Fix DeepEqual with kube metav1.Time
Convert some ErrorContains to assert
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Overriding is the incorrect part of speech for this sentence. It is more common to state that the values are overridden instead.
Other options would include:
```golang
// ldflags is overriding these values
```
```golang
// These values will be overridden by ldflags
```
etc.
Signed-off-by: Kevin Kirsche <kevin.kirsche@verizon.com>
Commit 2b17f4c8a8 fixed the way empty labels
are taken into account (i.e. not interpolated from environment variable),
but it created a regression.
`ValidateLabel` functions doesn't allow empty label value, but it has
always been possible to pass an empty label via the cli (`docker run --label foo`).
This fixes that by not validating the label flag.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Includes:
- [client] Remove duplicate NewClient functions
- Add API support for templated secrets and configs
- Adjust minimum API version for templated configs/secrets
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- Add `Version` to `types.Config`
- Add a new `Services` types (that is just `[]ServiceConfig`) and add
`MarshalYAML` method on it.
- Clean other top-level custom marshaling as `Services` is the only one
required.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Historically, the Dockerfile had to be insde the build-context, because it was
sent as part of the build-context.
3f6dc81e10
added support for passing the Dockerfile through stdin, in which case the
contents of the Dockerfile is injected into the build-context.
This patch uses the same mechanism for situations where the location of the
Dockerfile is passed, and its path is outside of the build-context.
Before this change:
$ mkdir -p myproject/context myproject/dockerfiles && cd myproject
$ echo "hello" > context/hello
$ echo -e "FROM busybox\nCOPY /hello /\nRUN cat /hello" > dockerfiles/Dockerfile
$ docker build --no-cache -f $PWD/dockerfiles/Dockerfile $PWD/context
unable to prepare context: the Dockerfile (/Users/sebastiaan/projects/test/dockerfile-outside/myproject/dockerfiles/Dockerfile) must be within the build context
After this change:
$ mkdir -p myproject/context myproject/dockerfiles && cd myproject
$ echo "hello" > context/hello
$ echo -e "FROM busybox\nCOPY /hello /\nRUN cat /hello" > dockerfiles/Dockerfile
$ docker build --no-cache -f $PWD/dockerfiles/Dockerfile $PWD/context
Sending build context to Docker daemon 2.607kB
Step 1/3 : FROM busybox
---> 6ad733544a63
Step 2/3 : COPY /hello /
---> 9a5ae1c7be9e
Step 3/3 : RUN cat /hello
---> Running in 20dfef2d180f
hello
Removing intermediate container 20dfef2d180f
---> ce1748f91bb2
Successfully built ce1748f91bb2
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Silvin
Vincent Demeester
Sebastiaan van Stijn
Silvin Lubecki
Eli Uriegas
Arash Deshmeh
Sebastiaan van Stijn
Vincent Demeester
Andrew Hsu
Tibor Vass
Tonis Tiigi
Nassim 'Nass' Eddequiouaq
Daniel Hiltgen
Zachary Romero
Mathieu Champlon
Simon Ferquel
Victor Vieux
Anda Xu
Brian Goff
Kir Kolyshkin
Essam A. Hassan
Justyn Temme
Christy Norman
Tibor Vass
Bogdan Anton
Daniel Nephin
Kevin Kirsche
shhsu@microsoft.com
Joffrey F
Daniel Nephin
Wataru Ishida