The daemon collects this information regardless if "debug" is
enabled. Print the debugging information if either the daemon,
or the client has debug enabled.
We should probably improve this logic and print any of these if
set (but some special rules are needed for file-descriptors, which
may use "-1".
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The flag-set that was returned is a pointer to the command's Flags(), which
is in itself passed by reference (as it is modified / set up).
This patch removes the flags return, to prevent assuming it's different than
the command's flags.
While SetupRootCommand is exported, a search showed that it's only used internally,
so changing the signature should not be a problem.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This flag was kept separate from the other flags, because at the time, the
CLI code and Daemon code still used the same codebase, and shared some parts.
This option only applied to the `docker` CLI, and thus was kept separate when
migrating to Cobra in 0452ff5a4d
Now that this code is only used for the CLI (and plugins), we can move this
flag together with the other flags.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add a const to allow documenting the environment variable in code. The location
of this const is a bit "unfortunate", due to CLI and Client-config to be spread
over the cli/config, cli/config/configfile, and docker/docker/client packages
(some options are for the client, others for the CLI), and some reorganizing
may be useful for easier consumption.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
commit 8a30653ed5 introduced a sync.Once
to allow for the config-directory (and home-dir) to be looked up lazily
instead of in an `init()`.
However, the package-level `configDir` variable can be set through two
separate paths; implicitly (through `config.Dir()`), and explicitly,
through `config.SetDir()`. The existing code had no synchronisation for
this, which could lead to a potential race-condition (code requesting
`config.Dir()` and code setting a custom path through `config.SetDir()`).
This patch adds synchronisation by triggering the `sync.Once` as part of
`config.SetDir()` to prevent it being triggered later (overwriting the
value that was set). It also restores the `resetConfigDir()` utility that
was removed in 379122b033, to allow resetting
the `sync.Once` for this test.
In general, we should get rid of this package-level variable, and store
it as a config on the client (passing the option to locations where its
used instead).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
support for kubernetes contexts was deprecated in docker 20.10 through
b639ea8b89, 0793f96394,
and 1d37fb3027, and removed altoghether in
23.0 through 193ede9b12.
This patch removes the remaining stubs for options that were deprecated
and no longer used.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
More things to be done after this, to allow passing a custom user-agent,
but let's start with just using this utility.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
When passing a Dockerfile through stdin, it's not possible to specify the
name of the Dockerfile (using the `-f` option). When building with BuildKit
enabled, an error is already produced for this case, but the classic builder
silently ignored it.
This patch adds an error for this situation:
echo -e 'FROM busybox' | DOCKER_BUILDKIT=0 docker build -f some.Dockerfile -
DEPRECATED: The legacy builder is deprecated and will be removed in a future release.
BuildKit is currently disabled; enable it by removing the DOCKER_BUILDKIT=0
environment-variable.
unable to prepare context: ambiguous Dockerfile source: both stdin and flag correspond to Dockerfiles
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This error was only used in a single location, so no need to define a
package-level variable for this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
All users of this function sorted the results afterwards, so let's
do it as part of the function itself.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
---
commandconn: fix race on `Close()`
During normal operation, if a `Read()` or `Write()` call results
in an EOF, we call `onEOF()` to handle the terminating command,
and store it's exit value.
However, if a Read/Write call was blocked while `Close()` is called
the in/out pipes are immediately closed which causes an EOF to be
returned. Here, we shouldn't call `onEOF()`, since the reason why
we got an EOF is because we're already terminating the connection.
This also prevents a race between two calls to the commands `Wait()`,
in the `Close()` call and `onEOF()`
---
Add CLI init timeout to SSH connections
---
connhelper: add 30s ssh default dialer timeout
(same as non-ssh dialer)
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
This code was introduced in 15aa2a663b,
but from those changes, it appears that overwriting the config value was
merely out of convenience, and that struct being used as an intermediate.
While changing the config here should be mostly ephemeral, and not written
back to the config-file, let's be clear on intent, and not mutatte the config
as part of this code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function returned the whole response, but we already handled the
warnings included in the response as part of the function. All consumers
of this function only used the container-ID, so let's simplify and return
just that (it's a non-exported func, so we can change the signature again
if we really need it).
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add a const for the name of the environment-variable we accept, so
that we can document its purpose in code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
the "golang.org/x/sys/execabs" package was introduced to address a security
issue on Windows, and changing the default behavior of os/exec was considered
a breaking change. go1.19 applied the behavior that was previously implemented
in the execabs package;
from the release notes: https://go.dev/doc/go1.19#os-exec-path
> Command and LookPath no longer allow results from a PATH search to be found
> relative to the current directory. This removes a common source of security
> problems but may also break existing programs that depend on using, say,
> exec.Command("prog") to run a binary named prog (or, on Windows, prog.exe)
> in the current directory. See the os/exec package documentation for information
> about how best to update such programs.
>
> On Windows, Command and LookPath now respect the NoDefaultCurrentDirectoryInExePath
> environment variable, making it possible to disable the default implicit search
> of “.” in PATH lookups on Windows systems.
With those changes, we no longer need to use the execabs package, and we can
switch back to os/exec.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The AuFS storage driver was deprecated and has been removed, so let's
update the test-fixtures accordingly.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
None of the client will return the old error-types, so there's no need
to keep the compatibility code. We can consider deprecating this function
in favor of the errdefs equivalent this.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `~/.dockercfg` file was replaced by `~/.docker/config.json` in 2015
(github.com/docker/docker/commit/18c9b6c6455f116ae59cde8544413b3d7d294a5e).
Commit b83bc67136 (v23.0.0, but backported to
v20.10) added a warning if no "current" config file was found but a legacy
file was, and if the CLI would fall back to using the deprecated file.
Commit ee218fa89e removed support for the
legacy file, but kept a warning in place if a legacy file was in place,
and now ignored.
This patch removes the warning as well, fully deprecating the legacy
`~/.dockercfg` file.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This FIXME was added in 2013 in c72ff318d3
and it's both unclear which "internal golang config parser" is referred to
here. Given that 10 Years have passed, this will unlikely happen, and doesn't
warrant a FIXME here.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function was deprecated in b87ed34351,
which is part of the v24.0 release, so we can remove it from master.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These were deprecated in f08252c10a, which
is part of the v24.0 release, so we can remove these on master.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
defaultCredentialsStore() on Linux does an exec.LookPath() for "pass", but
if a custom credential-store is passed to DetectDefaultStore, the result
of that won't be used.
This patch changes the logic to return early if a custom credential-store
is passed.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Code in methods of this type also used the Client, and having this receiver
named "c" made it easy to confuse it for referring to Client ("c").
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adding some utilities to print the output, to keep the linters happier
without having to either suppress errors, or ignore them.
Perhaps we should consider adding utilities for this on the "command.Streams"
outputs.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The VirtualSize field is deprecated and the upcoming API version v1.44
will no longer propagate the field. See:
1261fe69a3,
Given that in docker 1.10 and up (API v1.22), the VirtualSize and Size
fields contain the same value, and the "df" endpoint was not supported
until API v1.25, we can "safely" use Size instead; see:
- 4ae7176ffb
- 4352da7803
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This makes it possible to update the image loaded for e2e tests without
modifying all tests that use them.
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
These were deprecated in eb0ba4f8d5, which
was part of docker 19.03, so users should have had a chance to migrate.
This removes InStream, OutStream, NewInStream and NewOutStream
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This fixes the cli erroring out if the variable is set to an empty
value.
```
$ export DOCKER_BUILDKIT=
$ docker version
DOCKER_BUILDKIT environment variable expects boolean value: strconv.ParseBool: parsing "": invalid syntax
```
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Since Swarm does not use the `build` section, there's no reason to validate properties here.
This makes it so we don't have to keep updating the schema in the CLI to support properties
added in the Compose Spec for build, and does not imply any new feature support since Swarm
does not consider this section.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
For moby/moby PR 45025 (Docker v24, API v1.43).
`docker run --annotation foo=bar` is similar to `podman run --annotation foo=bar`,
however, unlike Podman, Docker implementation also accepts an annotation with an empty value.
(`docker run --annotation foo`)
Signed-off-by: Akihiro Suda <akihiro.suda.cz@hco.ntt.co.jp>
Set the client's API version that's used in the info, instead of requesting
it as part of printing.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Make this function only _print_ the info we have, and not read the username
from the credential-store.
This patch adds a Username field to the (local) `info` type, and sets it
when needed, so that prettyPrintServerInfo only has to format and print
the information, instead of calling out to the credential-store.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Starting with b4ca1c7368, docker login
no longer depends on info.IndexServerAddress to determine the default
registry.
The prettyPrintServerInfo() still depended on this information, which
could potentially show the wrong information.
This patch changes it to also depend on the same information as docker login
now does.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The IndexServerAddress field was as part of the initial Windows implementation
of the engine. For legal reasons, Microsoft Windows (and thus Docker images
based on Windows) were not allowed to be distributed through non-Microsoft
infrastructure. As a temporary solution, a dedicated "registry-win-tp3.docker.io"
registry was created to serve Windows images.
Currently, this field always shows "https://index.docker.io/v1/", which is
confusing, because that address is not used for the registry (only for
authentication and "v1" search).
docker info
...
Registry: https://index.docker.io/v1/
Starting with b4ca1c7368, this field is also
no longer used during authentication, and a3d56e7d06
removed the (deprecated) ElectAuthServer() which was previously used to
query it.
Given that there's currently no practical use for this information, and
it only adds "noise" (and confusion), this patch removes it from the default
output.
For now, the field is (still) available for those that want to use it;
docker info --format '{{.IndexServerAddress}}'
https://index.docker.io/v1/
But it won't be printed by default.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Deprecate this function in favor of the implementation in the API types,
considering that to be the canonical implementation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This utility provides the same logic as was implemented here (and using it
aligns with the "docker pull" equivalent).
Also added a TODO to replace this function with the regular "docker pull"
code.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
replace the local code with RetrieveAuthTokenFromImage, which does exactly the same;
623356001f/cli/command/registry.go (L163-L188)
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Replace uses of this function in favor of the implementation in the
API types, so that we have a single, canonical implementation.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
changes readInput() to trim whitespace. The existing code tried to be
conservative and only trimmed whitespace for username (not for password).
Passwords with leading/trailing whitespace would be _very_ unlikely, and
trimming whitespace is generally accepted.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
ConfigureAuth used the readInput() utility to read the username and password.
However, this utility did not return errors it encountered, but instead did
an os.Exit(1). A result of this was that the terminal was not restored if
an error happened. When reading the password, the terminal is configured to
disable echo (i.e. characters are not printed), and failing to restore
the previous state means that the terminal is now "non-functional".
This patch:
- changes readInput() to return errors it encounters
- uses a defer() to restore terminal state
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sebastiaan van Stijn
Sebastiaan van Stijn
Boban Acimovic
Laura Brehm
David Karlsson
Brian Goff
Paweł Gronowski
Akihiro Suda