This patch fixes a bug where labels use the same behavior as `--env`, resulting
in a value to be copied from environment variables with the same name as the
label if no value is set (i.e. a simple key, no `=` sign, no value).
An earlier pull request addressed similar cases for `docker run`;
2b17f4c8a8, but this did not address the
same situation for (e.g.) `docker service create`.
Digging in history for this bug, I found that use of the `ValidateEnv`
function for labels was added in the original implementation of the labels feature in
abb5e9a077 (diff-ae476143d40e21ac0918630f7365ed3cR34)
However, the design never intended it to expand environment variables,
and use of this function was either due to either a "copy/paste" of the
equivalent `--env` flags, or a misunderstanding (the name `ValidateEnv` does
not communicate that it also expands environment variables), and the existing
`ValidateLabel` was designed for _engine_ labels (which required a value to
be set).
Following the initial implementation, other parts of the code followed
the same (incorrect) approach, therefore leading the bug to be introduced
in services as well.
This patch:
- updates the `ValidateLabel` to match the expected validation
rules (this function is no longer used since 31dc5c0a9a),
and the daemon has its own implementation)
- corrects various locations in the code where `ValidateEnv` was used instead of `ValidateLabel`.
Before this patch:
```bash
export SOME_ENV_VAR=I_AM_SOME_ENV_VAR
docker service create --label SOME_ENV_VAR --tty --name test busybox
docker service inspect --format '{{json .Spec.Labels}}' test
{"SOME_ENV_VAR":"I_AM_SOME_ENV_VAR"}
```
After this patch:
```bash
export SOME_ENV_VAR=I_AM_SOME_ENV_VAR
docker service create --label SOME_ENV_VAR --tty --name test busybox
docker container inspect --format '{{json .Config.Labels}}' test
{"SOME_ENV_VAR":""}
```
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- make it possible to extract the formatter implementation from the
"common" code, that way, the formatter package stays small
- extract some formatter into their own packages
This is essentially moving the "formatter" implementation of each type
in their respective packages. The *main* reason to do that, is to be
able to depend on `cli/command/formatter` without depending of the
implementation detail of the formatter. As of now, depending on
`cli/command/formatter` means we depend on `docker/docker/api/types`,
`docker/licensing`, … — that should not be the case. `formatter`
should hold the common code (or helpers) to easily create formatter,
not all formatter implementations.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
- Use `Contains` instead of `Include`
- Use `ToJSON` instead of `ToParam`
- Remove usage of `ParseFlag` as it is deprecated too
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Before this change:
----------------------------------------------------
Create a service with reservations and limits for memory and cpu:
docker service create --name test \
--limit-memory=100M --limit-cpu=1 \
--reserve-memory=100M --reserve-cpu=1 \
nginx:alpine
Verify the configuration
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
}
}
Update just CPU limit and reservation:
docker service update --limit-cpu=2 --reserve-cpu=2 test
Notice that the memory limit and reservation is not preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000
},
"Reservations": {
"NanoCPUs": 2000000000
}
}
Update just Memory limit and reservation:
docker service update --limit-memory=200M --reserve-memory=200M test
Notice that the CPU limit and reservation is not preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"MemoryBytes": 209715200
},
"Reservations": {
"MemoryBytes": 209715200
}
}
After this change:
----------------------------------------------------
Create a service with reservations and limits for memory and cpu:
docker service create --name test \
--limit-memory=100M --limit-cpu=1 \
--reserve-memory=100M --reserve-cpu=1 \
nginx:alpine
Verify the configuration
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 1000000000,
"MemoryBytes": 104857600
}
}
Update just CPU limit and reservation:
docker service update --limit-cpu=2 --reserve-cpu=2 test
Confirm that the CPU limits/reservations are updated, but memory limit and reservation are preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000,
"MemoryBytes": 104857600
},
"Reservations": {
"NanoCPUs": 2000000000,
"MemoryBytes": 104857600
}
}
Update just Memory limit and reservation:
docker service update --limit-memory=200M --reserve-memory=200M test
Confirm that the Mempry limits/reservations are updated, but CPU limit and reservation are preserved:
docker service inspect --format '{{json .Spec.TaskTemplate.Resources}}' test
{
"Limits": {
"NanoCPUs": 2000000000,
"MemoryBytes": 209715200
},
"Reservations": {
"NanoCPUs": 2000000000,
"MemoryBytes": 209715200
}
}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Since go 1.7, "context" is a standard package. Since go 1.9,
x/net/context merely provides some types aliased to those in
the standard context package.
The changes were performed by the following script:
for f in $(git ls-files \*.go | grep -v ^vendor/); do
sed -i 's|golang.org/x/net/context|context|' $f
goimports -w $f
for i in 1 2; do
awk '/^$/ {e=1; next;}
/\t"context"$/ {e=0;}
{if (e) {print ""; e=0}; print;}' < $f > $f.new && \
mv $f.new $f
goimports -w $f
done
done
[v2: do awk/goimports fixup twice]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Removing a host by `<host>:<ip>` should only remove occurences of the host with
a matching IP-address, instead of removing all entries for that host.
In addition, combining `--host-rm` and `--host-add` for the same host should
result in the new host being added.
This patch fixes the way the diff is calculated to allow combining
removing/adding, and to support entries having both a canonical, and aliases.
Aliases cannot be added by the CLI, but are supported in the Service spec, thus
should be taken into account:
Entries can be removed by either a specific `<host-name>:<ip-address>`
mapping, or by `<host>` alone:
- If both IP-address and host-name is provided, only remove the hostname
from entries that match the given IP-address.
- If only a host-name is provided, remove the hostname from any entry it
is part of (either as _canonical_ host-name, or as _alias_).
- If, after removing the host-name from an entry, no host-names remain in
the entry, the entry itself should be removed.
For example, the list of host-entries before processing could look like this:
hosts = &[]string{
"127.0.0.2 host3 host1 host2 host4",
"127.0.0.1 host1 host4",
"127.0.0.3 host1",
"127.0.0.1 host1",
}
Removing `host1` removes every occurrence:
hosts = &[]string{
"127.0.0.2 host3 host2 host4",
"127.0.0.1 host4",
}
Whereas removing `host1:127.0.0.1` only remove the host if the IP-address matches:
hosts = &[]string{
"127.0.0.2 host3 host1 host2 host4",
"127.0.0.1 host4",
"127.0.0.3 host1",
}
Before this patch:
$ docker service create --name my-service --host foo:127.0.0.1 --host foo:127.0.0.2 --host foo:127.0.0.3 nginx:alpine
$ docker service update --host-rm foo:127.0.0.1 --host-add foo:127.0.0.4 my-service
$ docker service inspect --format '{{.Spec.TaskTemplate.ContainerSpec.Hosts}}' my-service
[]
After this patch is applied:
$ docker service create --name my-service --host foo:127.0.0.1 --host foo:127.0.0.2 --host foo:127.0.0.3 nginx:alpine
$ docker service update --host-rm foo:127.0.0.1 --host-add foo:127.0.0.5 my-service
$ docker service inspect --format '{{.Spec.TaskTemplate.ContainerSpec.Hosts}}' my-service
[127.0.0.2 foo 127.0.0.3 foo 127.0.0.4 foo]
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The "update" and "rollback" configurations were cross-wired, as a result, setting
`--rollback-*` options would override the service's update-options.
Creating a service with both update, and rollback configuration:
docker service create \
--name=test \
--update-failure-action=pause \
--update-max-failure-ratio=0.6 \
--update-monitor=3s \
--update-order=stop-first \
--update-parallelism=3 \
--rollback-failure-action=continue \
--rollback-max-failure-ratio=0.5 \
--rollback-monitor=4s \
--rollback-order=start-first \
--rollback-parallelism=2 \
--tty \
busybox
Before this change:
docker service inspect --format '{{json .Spec.UpdateConfig}}' test \
&& docker service inspect --format '{{json .Spec.RollbackConfig}}' test
Produces:
{"Parallelism":3,"FailureAction":"pause","Monitor":3000000000,"MaxFailureRatio":0.6,"Order":"stop-first"}
{"Parallelism":3,"FailureAction":"pause","Monitor":3000000000,"MaxFailureRatio":0.6,"Order":"stop-first"}
After this change:
{"Parallelism":3,"FailureAction":"pause","Monitor":3000000000,"MaxFailureRatio":0.6,"Order":"stop-first"}
{"Parallelism":2,"FailureAction":"continue","Monitor":4000000000,"MaxFailureRatio":0.5,"Order":"start-first"}
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Fix tests that failed when using cmp.Compare()
internal/test/testutil/assert
InDelta
Fix DeepEqual with kube metav1.Time
Convert some ErrorContains to assert
Signed-off-by: Daniel Nephin <dnephin@docker.com>
`--label-file` has the exact same behavior as `--env-file`, meaning any
placeholder (i.e. a simple key, no `=` sign, no value), it will get the
value from the environment variable.
For `--label-file` it should just add an empty label.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
When adding a network using `docker service update --network-add`,
the new network was added by _name_.
Existing entries in a service spec are listed by network ID, which
resulted in the CLI not detecting duplicate entries for the same
network.
This patch changes the behavior to always use the network-ID,
so that duplicate entries are correctly caught.
Before this change;
$ docker network create -d overlay foo
$ docker service create --name=test --network=foo nginx:alpine
$ docker service update --network-add foo test
$ docker service inspect --format '{{ json .Spec.TaskTemplate.Networks}}' test
[
{
"Target": "9ot0ieagg5xv1gxd85m7y33eq"
},
{
"Target": "9ot0ieagg5xv1gxd85m7y33eq"
}
]
After this change:
$ docker network create -d overlay foo
$ docker service create --name=test --network=foo nginx:alpine
$ docker service update --network-add foo test
service is already attached to network foo
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Extra hosts (`extra_hosts` in compose-file, or `--hosts` in services) adds
custom host/ip mappings to the container's `/etc/hosts`.
The current implementation used a `map[string]string{}` as intermediate
storage, and sorted the results alphabetically when converting to a service-spec.
As a result, duplicate hosts were removed, and order of host/ip mappings was not
preserved (in case the compose-file used a list instead of a map).
According to the **host.conf(5)** man page (http://man7.org/linux/man-pages/man5/host.conf.5.html)
multi Valid values are on and off. If set to on, the resolver
library will return all valid addresses for a host that
appears in the /etc/hosts file, instead of only the first.
This is off by default, as it may cause a substantial
performance loss at sites with large hosts files.
Multiple entries for a host are allowed, and even required for some situations,
for example, to add mappings for IPv4 and IPv6 addreses for a host, as illustrated
by the example hosts file in the **hosts(5)** man page (http://man7.org/linux/man-pages/man5/hosts.5.html):
# The following lines are desirable for IPv4 capable hosts
127.0.0.1 localhost
# 127.0.1.1 is often used for the FQDN of the machine
127.0.1.1 thishost.mydomain.org thishost
192.168.1.10 foo.mydomain.org foo
192.168.1.13 bar.mydomain.org bar
146.82.138.7 master.debian.org master
209.237.226.90 www.opensource.org
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
This patch changes the intermediate storage format to use a `[]string`, and only
sorts entries if the input format in the compose file is a mapping. If the input
format is a list, the original sort-order is preserved.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The `--host-add` flag adds a new `host:ip` mapping. Even though
adding an entry is idempotent (adding the same mapping multiple
times does not update the service's definition), it does not
_update_ an existing mapping with a new IP-address (multiple
IP-addresses can be defined for a host).
This patch removes the "or update" part from the flag's
description.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
and enable the new WarnUnmatchedDirective to warn if a nolint is unnecessary.
remove some unnecessary nolint
Signed-off-by: Daniel Nephin <dnephin@docker.com>
Running `docker service ps --quiet` should print the
full, non-truncated ID, even if the `--no-trunc` option
is not set.
This patch disables truncation if the `--quiet` flag
is set.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sebastiaan van Stijn
Vincent Demeester
Stephane Jeandeaux
Olli Janatuinen
Akihiro Suda
Arash Deshmeh
Victor Vieux
Vincent Demeester
Kir Kolyshkin
Essam A. Hassan
Silvin Lubecki
Daniel Nephin
Renaud Gaubert
Simon Ferquel
Sebastiaan van Stijn
Brian Goff
Riyaz Faizullabhoy