remove a client-side warning about volume drivers combined with "mounts"
in favor of producing the warning on the daemon side.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The docker inspect command did not inspect configs. This patch adds support for
it, and while at it, also sorts the list of objects in runInspect.
Before this patch:
docker config create myconfig ./codecov.yml
danpeyh8qzb30vgdj9fr665l1
docker inspect --format='{{.ID}}' myconfig
[]
Error: No such object: myconfig
docker inspect --format='{{.ID}}' --type=config myconfig
"config" is not a valid value for --type
With this patch:
docker inspect --format='{{.ID}}' myconfig
danpeyh8qzb30vgdj9fr665l1
docker inspect --format='{{.ID}}' --type=config myconfig
danpeyh8qzb30vgdj9fr665l1
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function was names slightly confusing, as it returns a fakeStore,
and it didn't do any constructing, so didn't provide value above just
constructing the type.
I'm planning to add more functionality to the fakeStore, but don't want
to maintain a full-fledged constructor for all of that, so let's remove
this utility.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Errors type was deprecated in d3bafa5f3e,
which has been included in the 27.4.0 release.
This patch removes the type, as there are no external consumers.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The format had a stray colon and space included. While fixing that, also
updating the error message to clarify the error happened while parsing
the file (not so much "loading" it).
Before:
WARNING: Error loading config file: /root/.docker/config.json: : json: cannot unmarshal bool into Go struct field ConfigFile.features of type string
After:
WARNING: Error parsing config file (/root/.docker/config.json): json: cannot unmarshal bool into Go struct field ConfigFile.features of type string
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this change, the config-file was always updated, even if there
were no changes to save. This could cause issues when the config-file
already had credentials set and was read-only for the current user.
For example, on NixOS, this poses a problem because `config.json` is a
symlink to a write-protected file;
$ readlink ~/.docker/config.json
/home/username/.config/sops-nix/secrets/ghcr_auth
$ readlink -f ~/.docker/config.json
/run/user/1000/secrets.d/28/ghcr_auth
Which causes `docker login` to fail, even if no changes were to be made;
Error saving credentials: rename /home/derek/.docker/config.json2180380217 /home/username/.config/sops-nix/secrets/ghcr_auth: invalid cross-device link
This patch updates the code to only update the config file if changes
were detected. It there's nothing to save, it skips updating the file,
as well as skips printing the warning about credentials being stored
insecurely.
With this patch applied:
$ docker login -u yourname
Password:
WARNING! Your credentials are stored unencrypted in '/root/.docker/config.json'.
Configure a credential helper to remove this warning. See
https://docs.docker.com/go/credential-store/
Login Succeeded
$ docker login -u yourname
Password:
Login Succeeded
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This message resulted in code-lines that were too long; move it to a
const together with the other hint. While at it, also suppress unhandled
error, and touch-up the code-comment.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Deprecation comments must have an empty line before them, otherwise tools
and linters may not recognise them. While fixing this, also updated the
reference to PromptUserForCredentials to be a docs-link to make it clickable.
Updates 6e4818e7d6.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
If restoring the terminal state fails, "echo" no longer works, which means
that anything the user types is no longer shown. The login itself may already
have succeeded, so we should not fail the command, but it's good to inform
the user that this happened, which may give them a clue why things no longer
work as they expect them to work.
With this patch:
docker login -u yourname
Password:
Error: failed to restore terminal state to echo input: something bad happened
Login Succeeded
We should consider printing instructions how to restore this manually (other
than restarting the shell). e.g., 'run stty echo' when in a Linux or macOS shell,
but PowerShell and CMD.exe may need different instructions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
we don't support empty passwords; when prompting the user for a password,
we already trim the result, but we didn't do the same for a password that's
passed through stdin or through the `-p` / `--password` flag.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- move trimming defaultUsername inside the if-branch, as it's the only
location where the result of the trimmed username is use.
- do the reverse for trimming argUser, because the result of trimming
argUser is used outside of the if-branch (not just for the condition).
putting it inside the condition makes it easy to assume the result is
only used locally.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
move the "post" check for username being empty inside the branch
that's handling the username, as it's the only branch where username
is mutated after checking if it's empty.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
remove isDefaultRegistry and inline it where it's used; the code-comment
already outlines what we're looking for, so the intermediate var didn't
add much currently.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This function has multiple conditional branches, which makes it harder
to see at a glance whether authConfig may be partially populated. This
patch instead returns a fresh instance for error returns to prevent any
confusion.
It also removes the named output variables, as they're now no longer used,
and the returned types should already be descriptive enough to understand
what's returned.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
The Errors type is no longer used by the CLI itself, and this custom
"multi-error" implementation had both limitations (empty list not being
`nil`), as well as formatting not being great. All of this making it not
something to recommend, and better handled with Go's stdlib.
As far as I could find, there's no external consumers of this, but let's
deprecate first, and remove in the next release.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This command was using a custom "multi-error" implementation, but it
had some limitations, and the formatting wasn't great.
This patch replaces it with Go's errors.Join.
Before:
docker plugin remove one two three
Error response from daemon: plugin "one" not found, Error response from daemon: plugin "two" not found, Error response from daemon: plugin "three" not found
After:
docker plugin remove one two three
Error response from daemon: plugin "one" not found
Error response from daemon: plugin "two" not found
Error response from daemon: plugin "three" not found
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Prevent some tests from failing when running from a pre-compiled
testbinary, and discard output to make the output less noisy.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This commit implements a validation
method for the port mappings.
Also, it removes the ports validation
method from the expose property
since they do not accept the
same type of values.
Signed-off-by: Stavros Panakakis <stavrospanakakis@gmail.com>
When running tests from my IDE, it compiles the tests before running,
then executes the compiled binary to run the tests. Cobra doesn't like that,
because in that situation os.Args is taken as argument for the command that's
executed. The command that's tested now sees the `test-` flags as arguments
(`-test.v -test.run ..`), which causes various tests to fail ("Command XYZ
does not accept arguments").
# compile the tests:
go test -c -o foo.test
# execute the test:
./foo.test -test.v -test.run TestFoo
=== RUN TestFoo
Error: "foo" accepts no arguments.
Set arguments to an empty slice to make sure it doesn't inherit arguments
from the test-binary.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This test was added in [moby@b2551c6] as part of a larger PR that implemented
unit tests in various packages. In this specific test, it looks like the
`imageSaveFunc` that's defined in the test-table was forgotten to be wired
up, causing all tests to effectively be skipped.
This patch wires up the function so that it's used in the test.
[moby@b2551c6]: b2551c619d
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Sebastiaan van Stijn
Harald Albers
Sebastiaan van Stijn
Laura Brehm
Paweł Gronowski
Stavros Panakakis