Support downloading remote tarball contexts in builder jobs.

Signed-off-by: Moysés Borges <moysesb@gmail.com>

docs/reference/commandline/cli.md

@@ -706,13 +706,17 @@ to any of the files in the context. For example, your build can use an
 [*ADD*](/reference/builder/#add) instruction to reference a file in the
 context.
 
-The `URL` parameter can specify the location of a Git repository; the repository
+The `URL` parameter can refer to three kinds of resources: Git repositories,
-acts as the build context. The system recursively clones the repository and its
+pre-packaged tarball contexts and plain text files. 
-submodules using a `git clone --depth 1 --recursive` command. This command runs
+
-in a temporary directory on your local host. After the command succeeds, the
+#### Git repositories
-directory is sent to the Docker daemon as the context. Local clones give you the
+When the `URL` parameter points to the location of a Git repository, the
-ability to access private repositories using local user credentials, VPNs, and
+repository acts as the build context. The system recursively clones the
-so forth.
+repository and its submodules using a `git clone --depth 1 --recursive`
+command. This command runs in a temporary directory on your local host. After
+the command succeeds, the directory is sent to the Docker daemon as the
+context. Local clones give you the ability to access private repositories using
+local user credentials, VPN's, and so forth.
 
 Git URLs accept context configuration in their fragment section, separated by a
 colon `:`.  The first part represents the reference that Git will check out,
@@ -739,21 +743,34 @@ Build Syntax Suffix | Commit Used | Build Context Used
 `myrepo.git#mybranch:myfolder` | `refs/heads/mybranch` | `/myfolder`
 `myrepo.git#abcdef:myfolder` | `sha1 = abcdef` | `/myfolder`
 
-Instead of specifying a context, you can pass a single Dockerfile in the `URL`
+#### Tarball contexts
-or pipe the file in via `STDIN`. To pipe a Dockerfile from `STDIN`:
+If you pass an URL to a remote tarball, the URL itself is sent to the daemon:
 
-    docker build - < Dockerfile
+    $ docker build http://server/context.tar.gz
 
-If you use STDIN or specify a `URL`, the system places the contents into a file
+The download operation will be performed on the host the Docker daemon is
-called `Dockerfile`, and any `-f`, `--file` option is ignored. In this
+running on, which is not necessarily the same host from which the build command
-scenario, there is no context.
+is being issued. The Docker daemon will fetch `context.tar.gz` and use it as the
+build context. Tarball contexts must be tar archives conforming to the standard
+`tar` UNIX format and can be compressed with any one of the 'xz', 'bzip2',
+'gzip' or 'identity' (no compression) formats.
+
+#### Text files
+Instead of specifying a context, you can pass a single `Dockerfile` in the
+`URL` or pipe the file in via `STDIN`. To pipe a `Dockerfile` from `STDIN`:
+
+    $ docker build - < Dockerfile
+
+If you use `STDIN` or specify a `URL` pointing to a plain text file, the system
+places the contents into a file called `Dockerfile`, and any `-f`, `--file`
+option is ignored. In this scenario, there is no context.
 
 By default the `docker build` command will look for a `Dockerfile` at the root
 of the build context. The `-f`, `--file`, option lets you specify the path to
 an alternative file to use instead. This is useful in cases where the same set
 of files are used for multiple builds. The path must be to a file within the
-build context. If a relative path is specified then it must to be relative to
+build context. If a relative path is specified then it is interpreted as
-the current directory.
+relative to the root of the context.
 
 In most cases, it's best to put each Dockerfile in an empty directory. Then,
 add to that directory only the files needed for building the Dockerfile. To
@@ -883,6 +900,29 @@ The Dockerfile at the root of the repository is used as Dockerfile. Note that
 you can specify an arbitrary Git repository by using the `git://` or `git@`
 schema.
 
+
+    $ docker build -f ctx/Dockerfile http://server/ctx.tar.gz
+    Downloading context: http://server/ctx.tar.gz [===================>]    240 B/240 B
+    Step 0 : FROM busybox
+     ---> 8c2e06607696
+    Step 1 : ADD ctx/container.cfg /
+     ---> e7829950cee3
+    Removing intermediate container b35224abf821
+    Step 2 : CMD /bin/ls
+     ---> Running in fbc63d321d73
+     ---> 3286931702ad
+    Removing intermediate container fbc63d321d73
+    Successfully built 377c409b35e4
+
+
+This will send the URL `http://server/ctx.tar.gz` to the Docker daemon, which
+will download and extract the referenced tarball. The `-f ctx/Dockerfile`
+parameter specifies a path inside `ctx.tar.gz` to the `Dockerfile` that will
+be used to build the image. Any `ADD` commands in that `Dockerfile` that
+refer to local paths must be relative to the root of the contents inside
+`ctx.tar.gz`. In the example above, the tarball contains a directory `ctx/`,
+so the `ADD ctx/container.cfg /` operation works as expected.
+
     $ docker build -f Dockerfile.debug .
 
 This will use a file called `Dockerfile.debug` for the build instructions

man/docker-build.1.md

@@ -37,13 +37,18 @@ daemon, not by the CLI, so the whole context must be transferred to the daemon.
 The Docker CLI reports "Sending build context to Docker daemon" when the context is sent to 
 the daemon.
 
-When a single Dockerfile is given as the URL, then no context is set.
+When the URL to a tarball archive or to a single Dockerfile is given, no context is sent from
-When a Git repository is set as the **URL**, the repository is used
+the client to the Docker daemon. When a Git repository is set as the **URL**, the repository is
-as context.
+cloned locally and then sent as the context.
 
 # OPTIONS
 **-f**, **--file**=*PATH/Dockerfile*
-   Path to the Dockerfile to use. If the path is a relative path then it must be relative to the current directory. The file must be within the build context. The default is *Dockerfile*.
+   Path to the Dockerfile to use. If the path is a relative path and you are
+   building from a local directory, then the path must be relative to that
+   directory. If you are building from a remote URL pointing to either a
+   tarball or a Git repository, then the path must be relative to the root of
+   the remote context. In all cases, the file must be within the build context.
+   The default is *Dockerfile*.
 
 **--force-rm**=*true*|*false*
    Always remove intermediate containers, even after unsuccessful builds. The default is *false*.
@@ -209,6 +214,17 @@ repository.
 
 Note: You can set an arbitrary Git repository via the `git://` schema.
 
+## Building an image using a URL to a tarball'ed context
+
+This will send the URL itself to the Docker daemon. The daemon will fetch the
+tarball archive, decompress it and use its contents as the build context. If you
+pass an *-f PATH/Dockerfile* option as well, the system will look for that file
+inside the contents of the tarball.
+
+    docker build -f dev/Dockerfile https://10.10.10.1/docker/context.tar.gz
+
+Note: supported compression formats are 'xz', 'bzip2', 'gzip' and 'identity' (no compression).
+
 # HISTORY
 March 2014, Originally compiled by William Henry (whenry at redhat dot com)
 based on docker.com source material and internal work.