Run a process in a new container. **docker run** starts a process with its own
file system, its own networking, and its own isolated process tree. The IMAGE
which starts the process may define defaults related to the process that will be
run in the container, the networking to expose, and more, but **docker run**
gives final control to the operator or administrator who starts the container
from the image. For that reason **docker run** has more options than any other
Docker command.
If the IMAGE is not already loaded then **docker run** will pull the IMAGE, and
all image dependencies, from the repository in the same way running **docker
pull** IMAGE, before it starts the container from that image.
# OPTIONS
**-a**, **--attach**=[]
Attach to STDIN, STDOUT or STDERR.
In foreground mode (the default when **-d**
is not specified), **docker run** can start the process in the container
and attach the console to the process’s standard input, output, and standard
error. It can even pretend to be a TTY (this is what most commandline
executables expect) and pass along signals. The **-a** option can be set for
each of stdin, stdout, and stderr.
**--add-host**=[]
Add a custom host-to-IP mapping (host:ip)
Add a line to /etc/hosts. The format is hostname:ip. The **--add-host**
option can be set multiple times.
**--blkio-weight**=0
Block IO weight (relative weight) accepts a weight value between 10 and 1000.
**-c**, **--cpu-shares**=0
CPU shares (relative weight)
By default, all containers get the same proportion of CPU cycles. This proportion
can be modified by changing the container's CPU share weighting relative
to the weighting of all other running containers.
To modify the proportion from the default of 1024, use the **-c** or **--cpu-shares**
flag to set the weighting to 2 or higher.
The proportion will only apply when CPU-intensive processes are running.
When tasks in one container are idle, other containers can use the
left-over CPU time. The actual amount of CPU time will vary depending on
the number of containers running on the system.
For example, consider three containers, one has a cpu-share of 1024 and
two others have a cpu-share setting of 512. When processes in all three
containers attempt to use 100% of CPU, the first container would receive
50% of the total CPU time. If you add a fourth container with a cpu-share
of 1024, the first container only gets 33% of the CPU. The remaining containers
receive 16.5%, 16.5% and 33% of the CPU.
On a multi-core system, the shares of CPU time are distributed over all CPU
cores. Even if a container is limited to less than 100% of CPU time, it can
use 100% of each individual CPU core.
For example, consider a system with more than three cores. If you start one
container **{C0}** with **-c=512** running one process, and another container
**{C1}** with **-c=1024** running two processes, this can result in the following
division of CPU shares:
PID container CPU CPU share
100 {C0} 0 100% of CPU0
101 {C1} 1 100% of CPU1
102 {C1} 2 100% of CPU2
**--cap-add**=[]
Add Linux capabilities
**--cap-drop**=[]
Drop Linux capabilities
**--cgroup-parent**=""
Path to cgroups under which the cgroup for the container will be created. If the path is not absolute, the path is considered to be relative to the cgroups path of the init process. Cgroups will be created if they do not already exist.
**--cidfile**=""
Write the container ID to the file
**--cpu-period**=0
Limit the CPU CFS (Completely Fair Scheduler) period
Limit the container's CPU usage. This flag tell the kernel to restrict the container's CPU usage to the period you specify.
**--cpuset-cpus**=""
CPUs in which to allow execution (0-3, 0,1)
**--cpuset-mems**=""
Memory nodes (MEMs) in which to allow execution (0-3, 0,1). Only effective on NUMA systems.
If you have four memory nodes on your system (0-3), use `--cpuset-mems=0,1`
then processes in your Docker container will only use memory from the first
two memory nodes.
**--cpu-quota**=0
Limit the CPU CFS (Completely Fair Scheduler) quota
Limit the container's CPU usage. By default, containers run with the full
CPU resource. This flag tell the kernel to restrict the container's CPU usage
to the quota you specify.
**-d**, **--detach**=*true*|*false*
Detached mode: run the container in the background and print the new container ID. The default is *false*.
At any time you can run **docker ps** in
the other shell to view a list of the running containers. You can reattach to a
detached container with **docker attach**. If you choose to run a container in
the detached mode, then you cannot use the **-rm** option.
When attached in the tty mode, you can detach from a running container without
stopping the process by pressing the keys CTRL-P CTRL-Q.
**--device**=[]
Add a host device to the container (e.g. --device=/dev/sdc:/dev/xvdc:rwm)
**--dns-search**=[]
Set custom DNS search domains (Use --dns-search=. if you don't wish to set the search domain)
Sets the container host name that is available inside the container.
**--help**
Print usage statement
**-i**, **--interactive**=*true*|*false*
Keep STDIN open even if not attached. The default is *false*.
When set to true, keep stdin open even if not attached. The default is false.
**--ipc**=""
Default is to create a private IPC namespace (POSIX SysV IPC) for the container
'container:<name|id>': reuses another container shared memory, semaphores and message queues
'host': use the host shared memory,semaphores and message queues inside the container. Note: the host mode gives the container full access to local shared memory and is therefore considered insecure.
**-l**, **--label**=[]
Set metadata on the container (e.g., --label com.example.key=value)
This value should always larger than **-m**, so you should always use this with **-m**.
**--mac-address**=""
Container MAC address (e.g. 92:d0:c6:0a:29:33)
Remember that the MAC address in an Ethernet network must be unique.
The IPv6 link-local address will be based on the device's MAC address
according to RFC4862.
**--name**=""
Assign a name to the container
The operator can identify a container in three ways:
UUID long identifier (“f78375b1c487e03c9438c729345e54db9d20cfa2ac1fc3494b6eb60872e74778”)
UUID short identifier (“f78375b1c487”)
Name (“jonah”)
The UUID identifiers come from the Docker daemon, and if a name is not assigned
to the container with **--name** then the daemon will also generate a random
string name. The name is useful when defining links (see **--link**) (or any
other place you need to identify a container). This works for both background
and foreground Docker containers.
**--net**="bridge"
Set the Network mode for the container
'bridge': creates a new network stack for the container on the docker bridge
'none': no networking for this container
'container:<name|id>': reuses another container network stack
'host': use the host network stack inside the container. Note: the host mode gives the container full access to local system services such as D-bus and is therefore considered insecure.
**--oom-kill-disable**=*true*|*false*
Whether to disable OOM Killer for the container or not.
**-P**, **--publish-all**=*true*|*false*
Publish all exposed ports to random ports on the host interfaces. The default is *false*.
When set to true publish all exposed ports to the host interfaces. The
default is false. If the operator uses -P (or -p) then Docker will make the
exposed port accessible on the host and the ports will be available to any
client that can reach the host. When using -P, Docker will bind any exposed
port to a random port on the host within an *ephemeral port range* defined by
`/proc/sys/net/ipv4/ip_local_port_range`. To find the mapping between the host
ports and the exposed ports, use `docker port`.
**-p**, **--publish**=[]
Publish a container's port, or range of ports, to the host.
Both hostPort and containerPort can be specified as a range of ports.
When specifying ranges for both, the number of container ports in the range must match the number of host ports in the range. (e.g., `-p 1234-1236:1234-1236/tcp`)
(use 'docker port' to see the actual mapping)
**--pid**=host
Set the PID mode for the container
**host**: use the host's PID namespace inside the container.
Note: the host mode gives the container full access to local PID and is therefore considered insecure.
**--uts**=host
Set the UTS mode for the container
**host**: use the host's UTS namespace inside the container.
Note: the host mode gives the container access to changing the host's hostname and is therefore considered insecure.
**--privileged**=*true*|*false*
Give extended privileges to this container. The default is *false*.
By default, Docker containers are
“unprivileged” (=false) and cannot, for example, run a Docker daemon inside the
Docker container. This is because by default a container is not allowed to
access any devices. A “privileged” container is given access to all devices.
When the operator executes **docker run --privileged**, Docker will enable access
to all devices on the host as well as set some configuration in AppArmor to
allow the container nearly all the same access to the host as processes running
outside of a container on the host.
**--read-only**=*true*|*false*
Mount the container's root filesystem as read only.
By default a container will have its root filesystem writable allowing processes
to write files anywhere. By specifying the `--read-only` flag the container will have
its root filesystem mounted as read only prohibiting any writes.
