Hardware S2R special registers match gl_Thread*MaskNV. We can trivially
implement these using Nvidia's extension on OpenGL or naively stubbing
them with the ARB instructions to match. This might cause issues if the
host device warp size doesn't match Nvidia's. That said, this is
unlikely on proper shaders.
Refer to the attached url for more documentation about these flags.
https://www.khronos.org/registry/OpenGL/extensions/NV/NV_shader_thread_group.txt
Some operations like atomicMin were ignored because they returned were
being stored to RZ. This operations have a side effect and it was being
ignored.
Drop the std::list hack to allocate memory indefinitely.
Instead use a custom allocator that keeps references valid until
destruction. This allocates fixed chunks of memory and puts pointers in
a free list. When an allocation is no longer used put it back to the
free list, this doesn't heap allocate because std::vector doesn't change
the capacity. If the free list is empty, allocate a new chunk.
Most overlaps in the buffer cache only contain one mapped address.
We can avoid close to all heap allocations once the buffer cache is
warmed up by using a small_vector with a stack size of one.
Instead of using boost::icl::interval_map for caching, use
boost::intrusive::set. interval_map is intended as a container where the
keys can overlap with one another; we don't need this for caching
buffers and a std::set-like data structure that allows us to search with
lower_bound is enough.
This has been wrong since 0432af5ad1
I haven't found a game that called this function (and I haven't tried this on a real Switch), and because of this I haven't been able to check if the number in assert OR the string in the assert is wrong, but one of the two is wrong:
NetworkProfileData is 0x18E, while SfNetworkProfileData is 0x17C, according to Switchbrew
Switchbrew doesn't officially say that NetworkProfileData's size is 0x18E but it's possible to calculate its size since Switchbrew provides the size and the offset of all the components of NetworkProfileData (which isn't currently implemented in yuzu, alongside SfNetworkProfileData)
NetworkProfileData documentation: https://switchbrew.org/wiki/Network_Interface_services#NetworkProfileData
SfNetworkProfileData documentation: https://switchbrew.org/wiki/Network_Interface_services#SfNetworkProfileData
Since I trust ogniK's work on reversing NIFM, I'd assume this was just a typo in the string
Add code required to use OpenGL assembly programs based on
NV_gpu_program5. Decompilation for ARB programs is intended to be added
in a follow up commit. This does **not** include ARB decompilation and
it's not in an usable state.
The intention behind assembly programs is to reduce shader stutter
significantly on drivers supporting NV_gpu_program5 (and other required
extensions). Currently only Nvidia's proprietary driver supports these
extensions.
Add a UI option hidden for now to avoid people enabling this option
accidentally.
This code path has some limitations that OpenGL compatibility doesn't
have:
- NV_shader_storage_buffer_object is limited to 16 entries for a single
OpenGL context state (I don't know if this is an intended limitation, an
specification issue or I am missing something). Currently causes issues
on The Legend of Zelda: Link's Awakening.
- NV_parameter_buffer_object can't bind buffers using an offset
different to zero. The used workaround is to copy to a temporary buffer
(this doesn't happen often so it's not an issue).
On the other hand, it has the following advantages:
- Shaders build a lot faster.
- We have control over how floating point rounding is done over
individual instructions (SPIR-V on Vulkan can't do this).
- Operations on shared memory can be unsigned and signed.
- Transform feedbacks are dynamic state (not yet implemented).
- Parameter buffers (uniform buffers) are per stage, matching NVN and
hardware's behavior.
- The API to bind and create assembly programs makes sense, unlike
ARB_separate_shader_objects.
Constant attributes (in OpenGL known disabled attributes) are not
supported on Vulkan, even with extensions. To emulate this behavior we
return zero on reads from disabled vertex attributes in shader code.
This has no caching cost because attribute formats are not dynamic state
on Vulkan and we have to store it in the pipeline cache anyway.
- Fixes Animal Crossing: New Horizons terrain borders
This was a left over from OpenGL when disabled buffers where not properly
emulated. We no longer have to assert this as it is checked in vertex
buffer initialization.
Previously we never cleared the states of the entries and the key would stay held down, also looping over the key bytes for each key lead to setting every bit for the key state instead of the key we wanted
"Not equal" operators on GLSL seem to behave as unordered when we expect
an ordered comparison.
Manually emulate this checking for LGE values (numbers, not-NaNs).
* Remove git submodules that will be loaded through conan
* Move custom Find modules to their own folder
* Use conan for downloading missing external dependencies
* CI: Change the yuzu source folder user to the user that the containers run on
* Attempt to remove dirty mingw build hack
* Install conan on the msvc build
* Only set release build type when using not using multi config generator
* Re-add qt bundled to workaround an issue with conan qt not downloading prebuilt binaries
* Add workaround for submodules that use legacy CMAKE variables
* Re-add USE_BUNDLED_QT on the msvc build bot
This should fix grass interactions on Breath of the Wild on Vulkan.
It is currently untested against validation layers.
Nvidia's Windows 443.09 beta driver or Linux 440.66.12 is required for
now.
While èis generally representable in some language encodings, in some
it isn't and will result in compilation warnings occurring. To remain
friendly with other language's codepages on Windows, we normalize it to
an ASCII e.
In file included from src/video_core/renderer_opengl/renderer_opengl.cpp:25:
In file included from src/./video_core/renderer_opengl/gl_rasterizer.h:26:
In file included from src/./video_core/renderer_opengl/gl_fence_manager.h:11:
src/./video_core/fence_manager.h:91:32: error: use 'template' keyword
to treat 'Write' as a dependent template name
memory_manager.Write<u32>(current_fence->GetAddress(), current_fence->GetPayload());
^
template
src/./video_core/fence_manager.h:137:32: error: use 'template'
keyword to treat 'Write' as a dependent template name
memory_manager.Write<u32>(current_fence->GetAddress(), current_fence->GetPayload());
^
template
Return the proper state of vr mode for IsVrModeEnabled
We should not return an error for SetVrModeEnabled. When VR Mode is turned on, it signals to lbl to turn vr mode on, not return an error code
Reduces some header churn and reduces rebuilds when some header
internals change.
While we're at it we can also resolve a missing include in buffer_cache.
Xenoblade 2 invokes a draw call with zero vertices.
This is likely due to indirect drawing (glDrawArraysIndirect).
This causes a crash in the staging buffer pool when trying to create a
buffer with a size of zero. To workaround this, skip index buffer setup
entirely when the number of indices is zero.
Drop MemoryBarrier from the buffer cache and use Maxwell3D's register
WaitForIdle.
To implement this on OpenGL we just call glMemoryBarrier with the
necessary bits.
Vulkan lacks this synchronization primitive, so we set an event and
immediately wait for it. This is not a pretty solution, but it's what
Vulkan can do without submitting the current command buffer to the queue
(which ends up being more expensive on the CPU).
Using deko3d as reference:
4e47ba0013/source/maxwell/gpu_3d_state.cpp (L42)
We were using bits 3 and 4 to determine depth clamping, but these are
the same both enabled and disabled:
state->depthClampEnable ? 0x101A : 0x181D
The same happens on Nvidia's OpenGL driver, where they do something like
this (default capabilities, GL 4.5 compatibility):
(state & DEPTH_CLAMP) != 0 ? 0x201a : 0x281c
There's always a difference between the first bits in this register, but
bit 11 is consistently disabled on both deko3d/NVN and OpenGL. This
commit changes yuzu's behaviour to use bit 11 to determine depth
clamping.
- Fixes depth issues on Super Mario Odyssey's intro.
bunnei
Tobias
ReinUsesLisp
VolcaEM
Morph
Fernando Sahmkow
David Marcec
James Rowe
Lioncash
Jan Beich
Dan
Jason Parker