actually use markdown features

pages should look better in yiki now since i improved that too
This commit is contained in:
yellows111 2024-10-11 20:40:21 +01:00
parent ca311e1953
commit 13e76c884d
Signed by: yellows111
SSH Key Fingerprint: SHA256:ynw5IJBU1pb7fZfHgLihKu9gHHA8FVpixZbB6IEB3r8
20 changed files with 328 additions and 66 deletions

View File

@ -6,7 +6,8 @@ An alternative to MSNPiki that aims to actually document things they didn't.
npm i
set WIKINAME=yellows' MSNP wiki
# this should be an absolute path on a domain to where the files will be put
set VPREFIX=https://example.com/
set VPREFIX=/
set DOMAIN=example.com
mkdir build
npm run build
cp ./node_modules/yiki/yiki.css build/

View File

@ -5,8 +5,9 @@ This is a list of all known MSNP commands and their originating version.
| `COMMAND` | Payload (Y/N) | Client to Server (Y/N) | Server to Client (Y/N) | Originating Version | Changed? (version list) |
| ----- | - | - | -| ------ | ----- |
| [`VER`](commands/ver.md) | N | Y | N | [MSNP2](versions/msnp2.md) | every MSNP version, but retaining base syntax, removed in MSNP24 |
| `INF` | N | Y | N | [MSNP2](versions/msnp2.md) | [MSNP3](versions/msnp3.md) (removed CTP), [MSNP8](versions/msnp8.md) (removed; automatic disconnect) |
| [`INF`](commands/inf.md) | N | Y | N | [MSNP2](versions/msnp2.md) | [MSNP3](versions/msnp3.md) (removed CTP), [MSNP8](versions/msnp8.md) (removed; automatic disconnect) |
| `CVR` | N | Y | N | [MSNP2](versions/msnp2.md) | [MSNP8](versions/msnp8.md) (parameter 8) |
| `CVQ` | N | Y | N | [CVR0](versions/cvr0.md) | [MSNP8](versions/msnp8.md) (parameter 8) |
| `USR` | N | Y | N | [MSNP2](versions/msnp2.md) | [MSNP3](versions/msnp3.md) (removed CTP), [MSNP6](versions/msnp7.md) (added verified bit to OK), [MSNP8](versions/msnp8.md) (TWN auth, removed MD5 auth, added unknown bit to OK), [MSNP10](versions/msnp10.md) (removed current display name in favor of PRP MFN), [MSNP15](versions/msnp15.md) (SSO auth) |
| `XFR` | N | Y | Y?| [MSNP2](versions/msnp2.md) | [MSNP3](versions/msnp3.md) (parameter 3), [MSNP7](versions/msnp7.md) (parameter 4) |
| [`XFR`](commands/xfr.md) | N | Y | Y?| [MSNP2](versions/msnp2.md) | [MSNP3](versions/msnp3.md) (parameter 3), [MSNP7](versions/msnp7.md) (parameter 4) |
| [`OUT`](commands/out.md) | N | Y | Y | [MSNP2](versions/msnp2.md) | [MSNP10](versions/msnp10.md) (MIG and TOU disconnect reasons added), [MSNP11](versions/msnp11.md) (RCT reason added with parameter for amount of minutes until attempted reconnect.) |

41
docs/commands/inf.md Normal file
View File

@ -0,0 +1,41 @@
# Introduction
`INF` is a command introduced with [MSNP2](../versions/msnp2.md).
It is a Dispatch Server and Notification Server command, without either a request or response payload.
It specifies which authentication methods the client is allowed to use.
This command can only be sent once. Any further uses of this command in the same session is Undefined Behavour.
# Client/Request
`INF TrID`
# Server/Response
`INF TrID security-package {security-package ...}`
Where (unlikely multiple) `security-package` parameters being the avaliable authentication methods your client is allowed to use.
# Examples
## Two types supported
*This configuration is only supported in [MSNP2](../versions/msnp2.md).*
```
C: INF 1
S: INF 1 MD5 CTP
```
## One type supported
```
C: INF 2
S: INF 2 MD5
```
## Command removed
*Since [MSNP8](../versions/msnp8.md).*
```
C: INF 3
```
Server disconnects client.
# Known changes
* Removed in [MSNP8](../versions/msnp8.md). [USR](usr.md) assumes the authentication method is `TWN`.

63
docs/commands/out.md Normal file
View File

@ -0,0 +1,63 @@
# Introduction
`OUT` is a command introduced with [MSNP2](../versions/msnp2.md).
It exists in all servers, without either a request or response payload.
It disconnects either the server or the client gracefully.
This command does not require a Transaction ID.
# Client/Request
`OUT`
# Server/Response
`OUT {reason}`
Where `reason` can be:
* `OTH`: Other client logged in to this account.
* `SSD`: Server is shutting down.
* `MIG`: [MSNP10](../versions/msnp10.md) and higher: Contact list has been migrated.
* `TOU`: [MSNP10](../versions/msnp10.md) and higher: You need to accept the Terms Of Use.
* `RCT`: [MSNP11](../versions/msnp11.md) and higher: Temporary server closure, please reconnect in (parameter 2) minutes.
`OUT RCT {minutes}`
Where `minutes` is the amount of minutes the client should wait before trying to log in automatically again.
# Examples
## Client-initiated
```
C: OUT
S: OUT
```
Server disconnects client.
## Logged in from another client
```
S: OUT OTH
```
## Server is shutting down
```
S: OUT SSD
```
## ABCH Migration
*This can only happen in [MSNP10](../versions/msnp10.md) exclusively.*
```
S: OUT MIG
```
## Terms of Use update
*This can only happen since [MSNP10](../versions/msnp10.md).*
```
S: OUT TOU
```
## Forced Reconnect
*This can only happen since [MSNP11](../versions/msnp11.md).*
```
S: OUT RCT 6
```

View File

@ -1,25 +1,24 @@
# Introduction
`VER` is a command introduced with [MSNP2](../versions/msnp2.md).
It is a Dispatch Server and Notification Server command, without either a request payload or response payload.
It specifies which protocols the client can accept, and which one the server likes the best.
This command can only be sent once. Any further uses of this command in the same session is Undefined Behavour.
# Client/Request
```
VER TrID dialect-name {dialect-name ...}
```
Where (possibly multiple) dialect-name(s) being the versions of the protocol your client can use.
`VER TrID dialect-name {dialect-name ...}`
Where (possibly multiple) `dialect-name` parameters being the versions of the protocol your client can use.
# Server/Response
```
VER TrID preferred-dialect-name
```
`VER TrID preferred-dialect-name`
Where `preferred-dialect-name` is the preferred version of the protocol the server will continue to use. The highest is usually preferred, unless it isn't supported by the server.
If the server's `preferred-dialect-name` is `0`, that means it doesn't want to use any of the protocols you have specified. A forced disconnect is to be expected in this circumstance.
This command can only be sent once. Any further uses of this command in the same session is Undefined Behavour.
# Examples
## Unsupported Protocols

86
docs/commands/xfr.md Normal file
View File

@ -0,0 +1,86 @@
# Introduction
`XFR` is a command introduced with [MSNP2](../versions/msnp2.md).
It is a Dispatch Server and Notification Server command, without either a request or response payload.
It tells the client what server to connect to for the request.
# Client/Request
`XFR TrID server-type`
Where `server-type` is either `SB` (for a switchboard server), or `NS` (for a new Notification server).
# Server/Response
## XFR NS
`XFR TrID NS address:port {0} {current-server}`
Where `address:port` is the server you have requested or being referred to is.
In [MSNP3](../versions/msnp3.md) or higher, `0` is always 0.
In [MSNP7](../versions/msnp7.md) or higher, `current-server` is the current server you are connected to.
## XFR SB
`XFR TrID SB address:port authentication-method authentication-parameter`
Where `address:port` is the server you have requested is.
Where `authentication-method` is always `CKI`.
Where `authentication-parameter` is the "cookie" you need to log in to Switchboard.
# Examples
## Client requests a new Switchboard connection
```
C: XFR 1 SB
S: XFR 1 SB 10.0.1.200:1865 CKI 123456789.123456789.123456789
```
## Client requests a new Notification server
*Only used as-is in Beta 2 as the first command sent to a Dispatch Server.*
```
C: XFR 2 NS
S: XFR 2 NS 10.0.0.5:1863
```
Client disconnects from server
Client opens a connection to 10.0.0.5:1863
## Client referred from Dispatch Server
### Very Old
*Only in [MSNP2](../versions/msnp2.md) Exclusively.*
```
C: USR 3 MD5 I example@hotmail.com
S: XFR 3 NS 10.0.0.5:1863
```
Client disconnects from server
Client opens a connection to 10.0.0.5:1863
### Classic
*Only in [MSNP3](../versions/msnp3.md) to [MSNP6](../versions/msnp6.md).*
```
C: USR 4 MD5 I example@hotmail.com
S: XFR 4 NS 10.0.0.5:1863 0
```
Client disconnects from server
Client opens a connection to 10.0.0.5:1863
### Modern
*Since [MSNP7](../versions/msnp7.md).*
```
C: USR 5 MD5 I example@hotmail.com
S: XFR 5 NS 10.0.0.5:1863 0 10.0.0.1:1863
```
Client disconnects from server
Client opens a connection to 10.0.0.5:1863
# Known changes
* [MSNP3](..versions/msnp3.md) adds a new parameter that is always 0.
* [MSNP7](..versions/msnp7.md) adds a new parameter that is the current server you are connected to.

View File

@ -21,9 +21,15 @@ Why not visit the [Command Table](command-table.md)?
More is to come soon! Hopefully!
# Wanted Information
* [MSNP2](versions/msnp2.md): What is the format of the initial `text/x-msmsgsemailnotification`?
* [MSNP3](versions/msnp3.md): How is `creds` generated for URLs native to this version?
* [MSNP4](versions/msnp4.md): Anything for this one.
* [MSNP6](versions/msnp6.md): What makes the "Account must be verified before using the service" dialog show up?
* [MSNP6](versions/msnp6.md): Does it really acknoledge the account verified bit? I couldn't get the toast to show up in Client Version 3.6.003x.
* [MSNP8](versions/msnp8.md): Did FND exist? Rumors said it did shortly before it got killed in all protocols.
* [MSNP10](versions/msnp10.md): Asynchronous `BPR MFN`s from the server. Does it really?
* [MSNP11](versions/msnp11.md): How does `ABCHMigrated: 0` really work now? `OUT MIG` still exists.
* All Protocols: Any error code known to exist but is missing from the pages.
# Common (or not) Terms
* Official Client: MSN Messenger (Service) or Windows Live Messenger.
@ -46,6 +52,7 @@ More is to come soon! Hopefully!
* New-line/Newline: A Carriage Return character followed by a Line Feed character. Seperates commands in the protocol.
* Carriage Return: To return the page-writing apparatus to the left of the page.
* Line Feed: To move the page-writing apparatus down a "line".
* TrID: Transaction ID. Links the server's response to the client's request.
# Where do I find or edit these page's source?
The git repo is avaliable at <https://git.kevinthe.horse/yellows111/msnp-wiki>.

View File

@ -1,8 +1,11 @@
# Introduction
CVR0 is a subprotocol of the Mobile Status Notification Protocol.
It was introduced officially in Client Version 1.0.0863, along with [MSNP2](msnp2.md).
It is used for requesting the latest client information in case no other protocols were supported.
# Command information
It introduces the commands:
* CVQ
@ -10,12 +13,16 @@ It introduces the commands:
*No commands were known to be removed in this version*
Known changes (from Beta 2):
# Known changes
(from Beta 2):
* Changed CVR to CVQ
* CVQ: Added fallback URL to response (parameter 5)
* [[MSNP8](msnp8.md) and higher] Added current principle address to request (parameter 8)
* [[MSNP8](msnp8.md) and higher]: Added current principle address to request (parameter 8)
Client-server communication example (MSNP2-MSNP7):
# Client-server communication examples
## Older protocols
* [MSNP2](msnp2.md)-[MSNP7](msnp7.md), example using Client Version 1.0.
```
C: VER 1 MSNP2 CVR0
S: VER 1 CVR0
@ -24,9 +31,8 @@ S: CVQ 2 5.0.0537 5.0.0537 1.0.0863 http://download.microsoft.com/download/msnme
```
Server disconnects client.
---
Client-server communication example (MSNP8+, example using Client 6.1):
## Newer protocols
* [MSNP8](msnp8.md) and higher, example using Client Version 6.1.
```
C: VER 1 MSNP10 MSNP9 CVR0
S: VER 1 CVR0

View File

@ -1,6 +1,10 @@
# Introduction
MSNP10 is the ninth released version of the Mobile Status Notification Protocol.
It was introduced officially in Client Version 6.1.0155.
# Command information
It introduces the notification service commands:
* ADC
* SBP
@ -13,21 +17,22 @@ The following commands were removed in this version:
* ADD (automatic disconnection)
* REA (automatic disconnection?)
Known changes (from [MSNP9](msnp9.md)):
* Added new initial profile variable TOUNeeded. If exists and set to 1,
# Known changes
(from [MSNP9](msnp9.md)):
* Added new initial profile variable `TOUNeeded`. If exists and set to 1,
a dialog box to review the Messenger Service Terms of Use is shown to the user.
* Changed SYN request and response.
Client: `SYN transactionID listVersion settingsVersion`.
Server: `SYN transactionID listVersion settingsVersion numberOfContacts numberOfGroups`.
settingsVersion is always 0.
`settingsVersion` is always 0.
* Current display name is removed from USR, now is returned with other user properties (PRPs) in SYN.
* PRP MFN replaces REA (current passport). SBP (contact's address) MFN replaces other uses of REA.
* Added new initial profile variable ABCHMigrated. If set to 1, some commands are altered, such as:
* Added new initial profile variable `ABCHMigrated`. If set to 1, some commands are altered, such as:
SYN: The request and response's list versions are now ISO 8601 with 7 subsecond digits,
usually with a -07:00 timezone offset.
the previously unused second parameter (both request and response) is used as the Last Settings Version,
and follows the same time format as List Versions now do.
LST: GUID specified as C= parameter, group IDs are now GUIDs.
LST: GUID specified as `C=` parameter, group IDs are now GUIDs.
ADC, REM: uses GUIDs instead of contact emails if the list is FL, and also for groups.
LSG, ADG: Uses GUIDs instead of IDs.
SBP: Uses the contact's GUID instead of the Contact Address.
@ -36,13 +41,13 @@ Known changes (from [MSNP9](msnp9.md)):
* Asynchronous BPRs also do not include the new list version number,
and now provide Friendly Name (MFN) changes instead of sending entire NLNs [needs to be confirmed].
* Added a new list: Pending List/PL (bit 5, decimal 16). Is meant for unhandled contact added you notifications.
* Added new server-side OUT reasons: MIG, if the server has migrated you to ABCH,
* Added new server-side [OUT](../commands/out.md) reasons: MIG, if the server has migrated you to ABCH,
and TOU, for not accepting the Service Terms of Use.
* Official Client: Now handles the 604 error code again, which was last seen in Client Version 3.6.003x.
Error code 913 is no longer handled after being implemented in Client Version 4.5.
* First protocol version to remove a core command implemented since MSNP2 draft (ADD).
* First protocol version to remove a core command implemented since [MSNP2](msnp2.md) draft (ADD).
Client-server communication example:
# Client-server communication example
```
C: VER 1 MSNP10 MSNP9 CVR0
S: VER 1 MSNP10

View File

@ -1,6 +1,10 @@
# Introduction
MSNP11 is the tenth released version of the Mobile Status Notification Protocol.
It was introduced officially in Client Version 7.0.0777.
# Command information
It introduces the notification service commands:
* GCF
* SBS
@ -13,13 +17,18 @@ It introduces the notification service commands:
*No commands were known to be removed in this version*
Known changes (from [MSNP10](msnp10.md)):
* All ABCHMigrated changes are now the default - ABCHMigrated: 0 is Undefined Behavour from now on.
# Known changes
(from [MSNP10](msnp10.md)):
* [OUT](../commands/out.md) RCT `TimeBeforeRetry` now exists.
`TimeBeforeRetry` is a numerical value in minutes that specifies the amount
of time in minutes the client should wait before reconnecting.
* All `ABCHMigrated` changes are now the default - `ABCHMigrated: 0` is Undefined Behavour from now on.
* Official Client: WebMessenger now canonically exists - Client Capability 512 is used for this.
* Official Client: Notifications (NOTs) with encoded NotificationData documents are supported for spaces.
* Official Client: Notifications (NOTs) with encoded `NotificationData` documents are supported for spaces.
* Official Client: Messenger Config requests now support regional arguments via SOAP.
* Official Client: [OUT](../commands/out.md) SSD is actually implemented now.
Client-server communication example:
# Client-server communication example
```
C: VER 1 MSNP10 MSNP9 CVR0
S: VER 1 MSNP10

View File

@ -1,6 +1,10 @@
MSNPXX is the eleventh released version of the Mobile Status Notification Protocol.
# Introduction
MSNP12 is the eleventh released version of the Mobile Status Notification Protocol.
It was introduced officially in Client Version 7.5.0299.
# Command information
It introduces the notification service commands:
* LKP
@ -10,14 +14,15 @@ It introduces the notification service commands:
*No commands were known to be removed in this version*
Known changes (from [MSNP11](msnp11.md)):
# Known changes
(from [MSNP11](msnp11.md)):
* Network IDs are introduced, each bit represents a contact's service, with bit 0/decimal 1 being MSNP.
* Switchboard commands JOI and IRO have a new parameter for the Client Capabilities of the relevant user.
* LST has the Network ID after the list bits (on any list), but before the Group ID (if on FL).
* Official Client: Uses Passport 3.0 (via the Microsoft Identity Common Runtime Library).
* Official Client: Dropped support for older operating systems, Now requires Windows XP or higher.
Client-server communication example:
# Client-server communication example
```
C: VER 1 MSNP12 MSNP11 MSNP10 CVR0
S: VER 1 MSNP12

View File

@ -1,12 +1,15 @@
# Introduction
MSNP2 is the first released version of the Mobile Status Notification Protocol.
It was introduced officially in Client Version 1.0.0863, along with [CVR0](cvr0.md).
# Command information
It introduces the dispatch service commands:
* INF
* OUT
* [INF](../commands/inf.md)
* [OUT](../commands/out.md)
* USR
* [VER](../commands/ver.md)
* XFR
* [XFR](../commands/xfr.md)
It introduces the notification service commands:
* ADD
@ -16,12 +19,12 @@ It introduces the notification service commands:
* FND (not in draft)
* FLN
* GTC
* INF
* [INF](../commands/inf.md)
* ILN
* LST
* MSG
* NLN
* OUT
* [OUT](../commands/out.md)
* PNG (not in draft)
* QNG (not in draft)
* REA (not in draft)
@ -32,7 +35,7 @@ It introduces the notification service commands:
* URL (not in draft)
* USR
* [VER](../commands/ver.md)
* XFR
* [XFR](../commands/xfr.md)
It introduces the switchboard service commands:
* ACK
@ -43,7 +46,7 @@ It introduces the switchboard service commands:
* JOI
* MSG
* NAK
* OUT
* [OUT](../commands/out.md)
* USR
It introduces the error codes:
@ -93,10 +96,11 @@ It introduces the error codes:
*No commands were known to be removed in this version*
Known changes (from Beta 2):
# Known changes
(from Beta 2)
* Dispatch servers now go through the normal user proceedure until `USR x MD5 I`.
Client-server communication example:
# Client-server communication example
```
C: VER 1 MSNP2 CVR0
S: VER 1 MSNP2
@ -147,4 +151,4 @@ Client disconnects from server
```
S: OUT
```
Server disconnects client
Server disconnects client

View File

@ -1,6 +1,10 @@
# Introduction
MSNP3 is the second released version of the Mobile Status Notification Protocol.
It was introduced officially in Client Version 2.0.0085.
# Command information
It introduces the notification service commands:
* IMS
@ -13,8 +17,9 @@ It introduces the error codes:
*No commands were known to be removed in this version*
Known changes (from [MSNP2](msnp2.md)):
* XFR: Added a new parameter that is always 0. No use is known or documented.
# Known changes
(from [MSNP2](msnp2.md)):
* [XFR](../commands/xfr.md): Added a new parameter that is always 0. No use is known or documented.
* Added Passport Site IDs to URL (parameter 3).
* Initial profile: Added Passport intergration fields.
* Font information has been added to Switchboard MSGs.
@ -26,11 +31,11 @@ Known changes (from [MSNP2](msnp2.md)):
* Clear-Text Password (CTP) authentication method discontinued.
* Entire content of initial email notification changed from
`text/x-msmsgsemailnotification` to `application/x-msmsgsinitialemailnotification`,
the format is likely different. Now includes unread email count. \[Examination needed\]
the format is likely different. Now includes unread email count. [Examination needed]
* Official Client: Changed form that URL uses to login drastically.
New format is undocumented, but now has MD5 `creds` instead of the plain-text `passwd`.
Client-server communication example:
# Client-server communication example
```
C: VER 1 MSNP3 MSNP2 CVR0
S: VER 1 MSNP3

View File

@ -1,13 +1,18 @@
# Introduction
MSNP4 is the third released version of the Mobile Status Notification Protocol.
It was introduced officially in Client Version 2.1.1047.
# Command information
*No commands for any service were known to be introduced in this version*
*No error codes were known to be introduced in this version*
*No commands were known to be removed in this version*
Known changes (from [MSNP3](msnp3.md)):
# Known changes
(from [MSNP3](msnp3.md)):
* ?
* ?
* ?
@ -19,7 +24,7 @@ Known changes (from [MSNP3](msnp3.md)):
Probably a new initial profile field by then.
(Client doesn't parse 923 yet either)
Client-server communication example:
# Client-server communication example
```
C: VER 1 MSNP4 MSNP3 CVR0
S: VER 1 MSNP4

View File

@ -1,6 +1,10 @@
# Introduction
MSNP5 is the fourth released version of the Mobile Status Notification Protocol.
It was introduced officially in Client Version 3.0.0283.
# Command information
It introduces the notification service commands:
* BPR
* NOT
@ -14,8 +18,9 @@ It introduces the notification service commands:
*No commands were known to be removed in this version*
Known changes (from [MSNP4](msnp4.md)):
* Non-protocol: Official website stopped updating the whatsnew.asp page between this (MSNP5) and MSNP7.
# Known changes
(from [MSNP4](msnp4.md)):
* Non-protocol: Official website stopped updating the whatsnew.asp page between this (MSNP5) and [MSNP7](msnp7.md).
* Official Client: Introduced the toast notification system. Notifications can now stack vertically.
* Official Client: Log in notifications are now handled by the newly introduced toast system.
* Official Client: Introduced emoticons.
@ -23,7 +28,7 @@ Known changes (from [MSNP4](msnp4.md)):
* Introduced first payload commands (SDC, PAG) to be sent to the switchboard from the client.
* Official Client: Error code 913 is no longer handled. It was last seen in Client Version 2.1.
Client-server communication example:
# Client-server communication example
```
C: VER 1 MSNP5 MSNP4 CVR0
S: VER 1 MSNP5

View File

@ -1,6 +1,10 @@
# Introduction
MSNP6 is the fifth released version of the Mobile Status Notification Protocol.
It was introduced officially in Client Version 3.6.0038.
# Command information
It introduces the notification service commands:
* CHL
* IPG
@ -12,7 +16,8 @@ It introduces the notification service commands:
*No commands were known to be removed in this version*
Known changes (from [MSNP5](msnp5.md)):
# Known changes
(from [MSNP5](msnp5.md)):
* USR OK now has a verified bit (parameter 4), if 0, shows a warning to verify the account.
Note: Your display name will be forced to be
`example@hotmail.com (E-Mail Address Not Verified)`, and cannot be changed.
@ -21,7 +26,7 @@ Known changes (from [MSNP5](msnp5.md)):
* An example client secret is `Q1P7W2E4J9R8U3S5`, which is tied to `msmsgs@msnmsgr.com`.
* First protocol version added in a patch release (3.6.0025 and 3.6.0026 do not support MSNP6).
Client-server communication example:
# Client-server communication example
```
C: VER 1 MSNP6 MSNP5 MSNP4 CVR0
S: VER 1 MSNP6

View File

@ -1,6 +1,10 @@
# Introduction
MSNP7 is the sixth released version of the Mobile Status Notification Protocol.
It was introduced officially in Client Version 4.5.0121.
# Command information
It introduces the notification service commands:
* ADG
* REG
@ -15,7 +19,8 @@ It introduces the error codes:
*No commands were known to be removed in this version*
Known changes (from [MSNP6](msnp6.md)):
# Known changes
(from [MSNP6](msnp6.md)):
* Added contact groups. All FL contacts now have an extra number array for what groups they are in.
The "Other Contacts" group can NOT be removed.
* ADD and REM now have group parameters if the list is FL.
@ -23,13 +28,13 @@ Known changes (from [MSNP6](msnp6.md)):
* Adds with the list set to FL with a group ID only adds that user from the respective group, not to the FL.
* SYN now includes LSG entries for groups.
* LST (either from itself or a SYN response ) now includes contact group numbers for the FL list.
* XFR NS's now include the origin server.
* [XFR](../commands/xfr.md) NS's now include the server it was sent from.
* Official Client: Error codes 602, 603, 911 (since removal in Client Version 3.0) are implemented.
Error code 604 is no longer handled since Client Version 2.0.
* Official website's `whatsnew.asp` page has been updated.
* Official Client: New service URLs for some features.
Client-server communication example:
# Client-server communication example
```
C: VER 1 MSNP7 MSNP6 MSNP5 MSNP4 CVR0
S: VER 1 MSNP7
@ -110,4 +115,4 @@ Client disconnects from server
```
S: OUT
```
Server disconnects client
Server disconnects client

View File

@ -1,6 +1,10 @@
# Introduction
MSNP8 is the seventh released version of the Mobile Status Notification Protocol.
It was introduced officially in Client Version 5.0.0537.
# Command information
*No commands for any service were known to be introduced in this version*
*No error codes were known to be introduced in this version*
@ -9,7 +13,8 @@ The following commands were removed in this version:
* INF (automatic disconnection)
* FND (`502` by July 2003, see Known changes for client details.)
Known changes (from [MSNP7](msnp7.md)):
# Known changes
(from [MSNP7](msnp7.md)):
* Being the first protocol split,
all released clients that support MSNP8 do not support any previous versions.
* Login process now VER-CVR-USR instead of VER-INF-USR.
@ -37,9 +42,8 @@ Known changes (from [MSNP7](msnp7.md)):
The URL is gathered from `svcs.microsoft.com`.
`abch_config.asp` provides an XML document with a `<abchconfig>` element.
It likely has a `<url>` child element containing the URL of the ABCH service.
Client-server communication example:
# Client-server communication example
```
C: VER 1 MSNP8 CVR0
S: VER 1 MSNP8

View File

@ -1,6 +1,10 @@
# Introduction
MSNP9 is the eighth released version of the Mobile Status Notification Protocol.
It was introduced officially in Client Version 6.0.0312.
# Command information
It introduces the notification service commands:
* PGD
@ -12,15 +16,17 @@ It introduces the error codes:
The following commands were removed in this version:
* PAG (returns 715)
Known changes (from [MSNP8](msnp8.md)):
# Known changes
(from [MSNP8](msnp8.md)):
* ILN, NLN, CHG: Added a MSNObject parameter.
Now you can tell other clients about image data associated with your account.
* QNG: Added a "next ping" time (in seconds) parameter
* Switchboard-MSG: Acknoledgement type D added
* Switchboard MSG: Acknowledgement type D added
* Official Client: Error 603 is handled again after being removed in Client Version 5.0.
Error code 711 is no longer handled after being implemented in Client Version 5.0.
* Official Client: Supports the Messenger Config XML service, replacing `svcs.microsoft.com`.
Client-server communication example:
# Client-server communication example
```
C: VER 1 MSNP9 MSNP8 CVR0
S: VER 1 MSNP9

4
package-lock.json generated
View File

@ -680,8 +680,8 @@
}
},
"node_modules/yiki": {
"version": "0.1.2",
"resolved": "git+https://git.kevinthe.horse/yellows111/yiki.git#4e65d573b281eca56fca10910ea026785152a6b5",
"version": "0.1.3",
"resolved": "git+https://git.kevinthe.horse/yellows111/yiki.git#8736d49e527cd9127fbf4d78ea7b648f5af5da16",
"license": "MIT",
"dependencies": {
"@liquify/prettify": "^0.5.5-beta.1",