Rather than conflict with the unexposed task model, change the names of
the object-oriented task display to `docker <object> ps`. The command
works identically to `docker service tasks`. This change is superficial.
This provides a more sensical docker experience while not trampling on
the task model that may be introduced as a top-level command at a later
date.
The following is an example of the display using `docker service ps`
with a service named `condescending_cori`:
```
$ docker service ps condescending_cori
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 13 minutes ago Running 6c6d232a5d0e
```
The following shows the output for the node on which the command is
running:
```console
$ docker node ps self
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
b1tpbi43k1ibevg2e94bmqo0s mad_kalam.1 mad_kalam apline Accepted 2 seconds ago Accepted 6c6d232a5d0e
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 12 minutes ago Running 6c6d232a5d0e
4x609m5o0qyn0kgpzvf0ad8x5 furious_davinci.1 furious_davinci redis Running 32 minutes ago Running 6c6d232a5d0e
```
Signed-off-by: Stephen J Day <stephen.day@docker.com>
These links were temporarily changed, because the
docs were published before the 1.12.0 tag was
available.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
There is no example bundlefile in the documentation
so a bundlefile example has been added. This should
help in case user don't want to search inside the
source code.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
Swarm mode makes it possible through the API to set labels to containers
but not through command line. This tries to fix it.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Instead reserve exit code 2 to be future proof, document that it should
not be used. Implementation-wise, it is considered as unhealthy, but
users should not rely on this as it may change in the future.
Signed-off-by: Tibor Vass <tibor@docker.com>
This changes the default behavior so that rolling updates will not
proceed once an updated task fails to start, or stops running during the
update. Users can use docker service inspect --pretty servicename to see
the update status, and if it pauses due to a failure, it will explain
that the update is paused, and show the task ID that caused it to pause.
It also shows the time since the update started.
A new --update-on-failure=(pause|continue) flag selects the
behavior. Pause means the update stops once a task fails, continue means
the old behavior of continuing the update anyway.
In the future this will be extended with additional behaviors like
automatic rollback, and flags controlling parameters like how many tasks
need to fail for the update to stop proceeding. This is a minimal
solution for 1.12.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
These docs have AuthzPlugin with a lower case 'z'. What the plugin
api is actually looking for is AuthZPlugin with an upper case 'Z'.
See 46e3a249a1/pkg/authorization/api.go (L5-L8)
Signed-off-by: Everett Toews <everett.toews@rackspace.com>
Hostnames are not supported for now because libnetwork can't use them
for overlay networking yet.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Update documentation to account for the changes in #24952.
docs/swarm/swarm-tutorial/rolling-update.md doesn't need any changes,
but the CLI reference pages should show the current help text.
drain-node.md no longer needs to specify --update-parallelism 1 in its
example.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
f5e1f6f6880391a5a3399023cf93a3c48502e57d replaced "secrets"
with "join tokens", which also removed the "auto-accept"
policy.
This removes some remaining references to those features.
Note that there are other references, but those
are already addressed in another pull request.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Swarm join has been changed in f5e1f6f6880391a5a3399023cf93a3c48502e57d,
removing various options and the "node accept" command.
This removes the removed options from the completion
scripts.
NOTE: a new command ("docker swarm join-token") was
also added, but is not part of this commit.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement the proposal from
https://github.com/docker/docker/issues/24430#issuecomment-233100121
Removes acceptance policy and secret in favor of an automatically
generated join token that combines the secret, CA hash, and
manager/worker role into a single opaque string.
Adds a docker swarm join-token subcommand to inspect and rotate the
tokens.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
At the moment docker's deprecation policy is 2 release cycles by
default, which is around 5 months. This may not be enough for
production environment and there is a need to extend the
deprecation cycle to 3 releases (see #24494).
This fix updates the docs/deprecated.md and extend the deprecation
cycle to 3 releases.
This fix is related to #24494 and #24534.
This fix fixes#24534.
Signed-off-by: Yong Tang <yong.tang.github@outlook.com>
this improves the formatting, and code-highlighting
of the `docker ps` reference page, and wraps sentences
to 80 chars
also adds single quotes around the formatting
example for labels.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Adds documentation for "--log-driver" and "--log-opt"
for services.
Also updated the API docs to include the new
options, and generated a more complete JSON
example.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
the output/response slightly changed in
340964db1c8f161a2ad156023eb47dcc93bf804b,
and `:latest` is no longer required for
various actions.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This renames the '--bundle' flag for docker (stack) deploy
to be consistent with 'docker build'.
Note that there's no shorthand '-f' added for now,
because this may be confusing on 'docker stack config',
which also takes a file, and for which we may want to
have a '--format' flag in future.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
this removes a copy/pasta whoopsie on my side,
introduced in de64324109d2694b1525e62b5c0072267282a36c
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
following the announcement;
https://groups.google.com/forum/m/#!topic/golang-announce/7JTsd70ZAT0
> [security] Go 1.6.3 and Go 1.7rc2 pre-announcement
>
> Hello gophers,
> We plan to issue Go 1.6.3 and Go 1.7rc2 on Monday July 18 at approximately 2am UTC.
> These are minor release to fix a security issue.
>
> Following our policy at https://golang.org/security, this is the pre-announcement of those releases.
>
> Because we are so late in the release cycle for Go 1.7, we will not issue a minor release of Go 1.5.
> Additionally, we plan to issue Go 1.7rc3 later next week, which will include any changes between 1.7rc1 and tip.
>
> Cheers,
> Chris on behalf of the Go team
**Note:**
the man/Dockerfile is not yet updated, because
the official image for Go 1.6.2 has not yet
been updated.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Stephen J Day
Anusha Ragunathan
Sebastiaan van Stijn
Yong Tang
Charles Smith
Harald Albers
Vincent Demeester
Tibor Vass
Aaron Lehmann
Aanand Prasad
Everett Toews
allencloud
Steve Durrheimer
Justin Cormack
Nishant Totla
Harry Zhang
Daniel Nephin
Dong Chen