- https://github.com/golang/go/issues?q=milestone%3AGo1.22.7+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.22.6...go1.22.7
These minor releases include 3 security fixes following the security policy:
- go/parser: stack exhaustion in all Parse* functions
Calling any of the Parse functions on Go source code which contains deeply nested literals can cause a panic due to stack exhaustion.
This is CVE-2024-34155 and Go issue https://go.dev/issue/69138.
- encoding/gob: stack exhaustion in Decoder.Decode
Calling Decoder.Decode on a message which contains deeply nested structures can cause a panic due to stack exhaustion.
This is a follow-up to CVE-2022-30635.
Thanks to Md Sakib Anwar of The Ohio State University (anwar.40@osu.edu) for reporting this issue.
This is CVE-2024-34156 and Go issue https://go.dev/issue/69139.
- go/build/constraint: stack exhaustion in Parse
Calling Parse on a "// +build" build tag line with deeply nested expressions can cause a panic due to stack exhaustion.
This is CVE-2024-34158 and Go issue https://go.dev/issue/69141.
View the release notes for more information:
https://go.dev/doc/devel/release#go1.23.1
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
e2e/global/cli_test.go:217:28: printf: non-constant format string in call to gotest.tools/v3/poll.Continue (govet)
return poll.Continue(err.Error())
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Such as with `docker run`, if a user CTRL-Cs while attached to a
container, we should forward the signal and wait for the exit from
`ContainerWait`, instead of just returning.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
In 3f0d90a2a9 we introduced a global
signal handler and made sure all the contexts passed into command
execution get (appropriately) cancelled when we get a SIGINT.
Due to that change, and how we use this context during `docker attach`,
we started to return the context cancelation error when a user signals
the running `docker attach`.
Since this is the intended behavior, we shouldn't return an error, so
this commit adds checks to ignore this specific error in this case.
Also adds a regression test.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
When trying to use an invalid flag, the CLI currently prints the a short
error message, instructions to use the `--help` flag to learn about the
correct usage, followed by the command's usage output.
While this is a common convention, and may have been a nice gesture when
docker was still young and only had a few commands and options ("you did
something wrong, but here's an overview of what you can use"), that's no
longer the case, and many commands have a _very_ long output.
The result of this is that the error message, which is the relevant
information in this case - "You mis-typed something" - is lost in the
output, and hard to find (sometimes even requiring scrolling back).
The output is also confusing, because it _looks_ like something ran
successfully (most of the output is not about the error!).
Even further; the suggested resolution (try `--help` to see the correct
options) is rather redundant, because running teh command with `--help`
produces _exactly_ the same output as was just showh, baring the error
message. As a fun fact, due to the usage output being printed, the
output even contains not one, but _two_ "call to actions";
- `See 'docker volume --help'.` (under the erro message)
- `Run 'docker volume COMMAND --help' for more information on a command.`
(under the usage output)
In short; the output is too verbose, confusing, and doesn't provide
a good UX. Let's reduce the output produced so that the focus is on the
important information.
This patch:
- Changes the usage to the short-usage.
- Prefixes the error message with the binary / root-command name
(usually `docker:`) to be consistent with `unknon command`, and helps
to distinguish where the message originated from (the `docker` CLI in
this case).
- Adds an empty line between the error-message and the "call to action"
(`Run 'docker volume --help' ...` in the example below). This helps
separating the error message ("unkown flag") from the call-to-action.
Before this patch:
docker volume --no-such-flag
unknown flag: --no-such-flag
See 'docker volume --help'.
Usage: docker volume COMMAND
Manage volumes
Commands:
create Create a volume
inspect Display detailed information on one or more volumes
ls List volumes
prune Remove unused local volumes
rm Remove one or more volumes
update Update a volume (cluster volumes only)
Run 'docker volume COMMAND --help' for more information on a command.
With this patch:
docker volume --no-such-flag
docker: unknown flag: --no-such-flag
Usage: docker volume COMMAND
Run 'docker volume --help' for more information
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
This confused me fore a bit, because I thought the test was checking for
an actual `context.Canceled` error (which is spelled "context canceled"
with a single "l". But then I found that this was a string that's printed
as part of a test-utility, just looking very similar but with the British
spelling ("cancelled").
Let's change this to a message that's unique for the test, also to make it
more grep'able.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Improve the output for these validation errors:
- Removes the short command description from the output. This information
does not provide much useful help, and distracts from the error message.
- Reduces punctuation, and
- Prefixes the error message with the binary / root-command name
(usually `docker:`) to be consistent with other similar errors.
- Adds an empty line between the error-message and the "call to action"
(`Run 'docker volume --help'...` in the example below). This helps
separating the error message and "usage" from the call-to-action.
Before this patch:
$ docker volume ls one two three
"docker volume ls" accepts no arguments.
See 'docker volume ls --help'.
Usage: docker volume ls [OPTIONS]
List volumes
$ docker volume create one two three
"docker volume create" requires at most 1 argument.
See 'docker volume create --help'.
Usage: docker volume create [OPTIONS] [VOLUME]
Create a volume
With this patch:
$ docker volume ls one two three
docker: 'docker volume ls' accepts no arguments
Usage: docker volume ls [OPTIONS]
Run 'docker volume ls --help' for more information
$ docker voludocker volume create one two three
docker: 'docker volume create' requires at most 1 argument
Usage: docker volume create [OPTIONS] [VOLUME]
SRun 'docker volume create --help' for more information
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Before this patch, output for invalid top-level and sub-commands differed.
For top-level commands, the CLI would print an error-message and a suggestion
to use `--help`. For missing *subcommands*, we would hit a different code-path,
and different output, which includes full "usage" / "help" output.
While it is a common convention to show usage output, and may have been
a nice gesture when docker was still young and only had a few commands
and options ("you did something wrong; here's an overview of what you
can use"), that's no longer the case, and many commands have a _very_
long output.
The result of this is that the error message, which is the relevant
information in this case - "You mis-typed something" - is lost in the
output, and hard to find (sometimes even requiring scrolling back).
The output is also confusing, because it _looks_ like something ran
successfully (most of the output is not about the error!).
Even further; the suggested resolution (try `--help` to see the correct
options) is rather redundant, because running teh command with `--help`
produces _exactly_ the same output as was just showh, baring the error
message. As a fun fact, due to the usage output being printed, the
output even contains not one, but _two_ "call to actions";
- `See 'docker volume --help'.` (under the erro message)
- `Run 'docker volume COMMAND --help' for more information on a command.`
(under the usage output)
In short; the output is too verbose, confusing, and doesn't provide
a good UX. Let's reduce the output produced so that the focus is on the
important information.
This patch:
- Changes the usage to the short-usage.
- Changes the error-message to mention the _full_ command instead of only
the command after `docker` (so `docker no-such-command` instead of
`no-such-command`).
- Prefixes the error message with the binary / root-command name
(usually `docker:`); this is something we can still decide on, but
it's a pattern we already use in some places. The motivation for this
is that `docker` commands can often produce output that's a combination
of output from the CLI itself, output from the daemon, and even output
from the container. The `docker:` prefix helps to distinguish where
the message originated from (the `docker` CLI in this case).
- Adds an empty line between the error-message and the "call to action"
(`Run 'docker volume --help'...` in the example below). This helps
separating the error message ("unkown flag") from the call-to-action.
Before this patch:
Unknown top-level command:
docker nosuchcommand foo
docker: 'nosuchcommand' is not a docker command.
See 'docker --help'
Unknown sub-command:
docker volume nosuchcommand foo
Usage: docker volume COMMAND
Manage volumes
Commands:
create Create a volume
inspect Display detailed information on one or more volumes
ls List volumes
prune Remove unused local volumes
rm Remove one or more volumes
update Update a volume (cluster volumes only)
Run 'docker volume COMMAND --help' for more information on a command.
After this patch:
Unknown top-level command:
docker nosuchcommand foo
docker: unknown command: docker nosuchcommand
Run 'docker --help' for more information
Unknown sub-command:
docker volume nosuchcommand foo
docker: unknown command: 'docker volume nosuchcommand'
Usage: docker volume COMMAND
Run 'docker volume --help' for more information
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.12+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.11...go1.21.12
These minor releases include 1 security fixes following the security policy:
net/http: denial of service due to improper 100-continue handling
The net/http HTTP/1.1 client mishandled the case where a server responds to a request with an "Expect: 100-continue" header with a non-informational (200 or higher) status. This mishandling could leave a client connection in an invalid state, where the next request sent on the connection will fail.
An attacker sending a request to a net/http/httputil.ReverseProxy proxy can exploit this mishandling to cause a denial of service by sending "Expect: 100-continue" requests which elicit a non-informational response from the backend. Each such request leaves the proxy with an invalid connection, and causes one subsequent request using that connection to fail.
Thanks to Geoff Franks for reporting this issue.
This is CVE-2024-24791 and Go issue https://go.dev/issue/67555.
View the release notes for more information:
https://go.dev/doc/devel/release#go1.21.12
**- Description for the changelog**
```markdown changelog
Update Go runtime to 1.21.12
```
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
cli/registry/client/endpoint.go:128:34: fmt.Sprintf can be replaced with string concatenation (perfsprint)
req.Header.Set("Authorization", fmt.Sprintf("Bearer %s", th.token))
^
cli/command/telemetry_docker.go:88:14: fmt.Sprintf can be replaced with string concatenation (perfsprint)
endpoint = fmt.Sprintf("unix://%s", path.Join(u.Host, u.Path))
^
cli/command/cli_test.go:195:47: fmt.Sprintf can be replaced with string concatenation (perfsprint)
opts := &flags.ClientOptions{Hosts: []string{fmt.Sprintf("unix://%s", socket)}}
^
cli/command/registry_test.go:59:24: fmt.Sprintf can be replaced with string concatenation (perfsprint)
inputServerAddress: fmt.Sprintf("https://%s", testAuthConfigs[1].ServerAddress),
^
cli/command/container/opts_test.go:338:35: fmt.Sprintf can be replaced with string concatenation (perfsprint)
if config, _, _ := mustParse(t, fmt.Sprintf("--hostname=%s", hostname)); config.Hostname != expectedHostname {
^
cli/command/context/options.go:79:24: fmt.Sprintf can be replaced with string concatenation (perfsprint)
errs = append(errs, fmt.Sprintf("%s: unrecognized config key", k))
^
cli/command/image/build.go:461:68: fmt.Sprintf can be replaced with string concatenation (perfsprint)
line = dockerfileFromLinePattern.ReplaceAllLiteralString(line, fmt.Sprintf("FROM %s", reference.FamiliarString(trustedRef)))
^
cli/command/image/remove_test.go:21:9: fmt.Sprintf can be replaced with string concatenation (perfsprint)
return fmt.Sprintf("Error: No such image: %s", n.imageID)
^
cli/command/image/build/context.go:229:102: fmt.Sprintf can be replaced with string concatenation (perfsprint)
progReader := progress.NewProgressReader(response.Body, progressOutput, response.ContentLength, "", fmt.Sprintf("Downloading build context from remote url: %s", remoteURL))
^
cli/command/service/logs.go:215:16: fmt.Sprintf can be replaced with string concatenation (perfsprint)
taskName += fmt.Sprintf(".%s", task.ID)
^
cli/command/service/logs.go:217:16: fmt.Sprintf can be replaced with string concatenation (perfsprint)
taskName += fmt.Sprintf(".%s", stringid.TruncateID(task.ID))
^
cli/command/service/progress/progress_test.go:877:18: fmt.Sprintf can be replaced with string concatenation (perfsprint)
ID: fmt.Sprintf("task%s", nodeID),
^
cli/command/stack/swarm/remove.go:61:24: fmt.Sprintf can be replaced with string concatenation (perfsprint)
errs = append(errs, fmt.Sprintf("Failed to remove some resources from stack: %s", namespace))
^
cli/command/swarm/ipnet_slice_test.go:32:9: fmt.Sprintf can be replaced with string concatenation (perfsprint)
arg := fmt.Sprintf("--cidrs=%s", strings.Join(vals, ","))
^
cli/command/swarm/ipnet_slice_test.go:137:30: fmt.Sprintf can be replaced with string concatenation (perfsprint)
if err := f.Parse([]string{fmt.Sprintf("--cidrs=%s", strings.Join(test.FlagArg, ","))}); err != nil {
^
cli/compose/schema/schema.go:105:11: fmt.Sprintf can be replaced with string concatenation (perfsprint)
return fmt.Sprintf("must be a %s", humanReadableType(expectedType))
^
cli/manifest/store/store.go:165:9: fmt.Sprintf can be replaced with string concatenation (perfsprint)
return fmt.Sprintf("No such manifest: %s", n.object)
^
e2e/image/push_test.go:340:4: fmt.Sprintf can be replaced with string concatenation (perfsprint)
fmt.Sprintf("NOTARY_ROOT_PASSPHRASE=%s", pwd),
^
e2e/image/push_test.go:341:4: fmt.Sprintf can be replaced with string concatenation (perfsprint)
fmt.Sprintf("NOTARY_TARGETS_PASSPHRASE=%s", pwd),
^
e2e/image/push_test.go:342:4: fmt.Sprintf can be replaced with string concatenation (perfsprint)
fmt.Sprintf("NOTARY_SNAPSHOT_PASSPHRASE=%s", pwd),
^
e2e/image/push_test.go:343:4: fmt.Sprintf can be replaced with string concatenation (perfsprint)
fmt.Sprintf("NOTARY_DELEGATION_PASSPHRASE=%s", pwd),
^
e2e/plugin/trust_test.go:23:16: fmt.Sprintf can be replaced with string concatenation (perfsprint)
pluginName := fmt.Sprintf("%s/plugin-content-trust", registryPrefix)
^
e2e/plugin/trust_test.go:53:8: fmt.Sprintf can be replaced with string concatenation (perfsprint)
Out: fmt.Sprintf("Installed plugin %s", pluginName),
^
e2e/trust/revoke_test.go:62:57: fmt.Sprintf can be replaced with string concatenation (perfsprint)
icmd.RunCommand("docker", "tag", fixtures.AlpineImage, fmt.Sprintf("%s:v1", revokeRepo)).Assert(t, icmd.Success)
^
e2e/trust/revoke_test.go:64:49: fmt.Sprintf can be replaced with string concatenation (perfsprint)
icmd.Command("docker", "-D", "trust", "sign", fmt.Sprintf("%s:v1", revokeRepo)),
^
e2e/trust/revoke_test.go:68:58: fmt.Sprintf can be replaced with string concatenation (perfsprint)
icmd.RunCommand("docker", "tag", fixtures.BusyboxImage, fmt.Sprintf("%s:v2", revokeRepo)).Assert(t, icmd.Success)
^
e2e/trust/revoke_test.go:70:49: fmt.Sprintf can be replaced with string concatenation (perfsprint)
icmd.Command("docker", "-D", "trust", "sign", fmt.Sprintf("%s:v2", revokeRepo)),
^
e2e/trust/sign_test.go:36:47: fmt.Sprintf can be replaced with string concatenation (perfsprint)
assert.Check(t, is.Contains(result.Stdout(), fmt.Sprintf("v1: digest: sha256:%s", fixtures.AlpineSha)))
^
e2e/trust/sign_test.go:53:47: fmt.Sprintf can be replaced with string concatenation (perfsprint)
assert.Check(t, is.Contains(result.Stdout(), fmt.Sprintf("v1: digest: sha256:%s", fixtures.BusyboxSha)))
^
e2e/trust/sign_test.go:65:47: fmt.Sprintf can be replaced with string concatenation (perfsprint)
assert.Check(t, is.Contains(result.Stdout(), fmt.Sprintf("v1: digest: sha256:%s", fixtures.AlpineSha)))
^
opts/file.go:21:9: fmt.Sprintf can be replaced with string concatenation (perfsprint)
return fmt.Sprintf("poorly formatted environment: %s", e.msg)
^
opts/hosts_test.go:26:31: fmt.Sprintf can be replaced with string concatenation (perfsprint)
"tcp://host:": fmt.Sprintf("tcp://host:%s", defaultHTTPPort),
^
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.21.11 (released 2024-06-04) includes security fixes to the archive/zip
and net/netip packages, as well as bug fixes to the compiler, the go command,
the runtime, and the os package. See the Go 1.21.11 milestone on our issue
tracker for details;
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.11+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.10...go1.21.11
From the security announcement;
We have just released Go versions 1.22.4 and 1.21.11, minor point releases.
These minor releases include 2 security fixes following the security policy:
- archive/zip: mishandling of corrupt central directory record
The archive/zip package's handling of certain types of invalid zip files
differed from the behavior of most zip implementations. This misalignment
could be exploited to create an zip file with contents that vary depending
on the implementation reading the file. The archive/zip package now rejects
files containing these errors.
Thanks to Yufan You for reporting this issue.
This is CVE-2024-24789 and Go issue https://go.dev/issue/66869.
- net/netip: unexpected behavior from Is methods for IPv4-mapped IPv6 addresses
The various Is methods (IsPrivate, IsLoopback, etc) did not work as expected
for IPv4-mapped IPv6 addresses, returning false for addresses which would
return true in their traditional IPv4 forms.
Thanks to Enze Wang of Alioth and Jianjun Chen of Zhongguancun Lab
for reporting this issue.
This is CVE-2024-24790 and Go issue https://go.dev/issue/67680.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
These minor releases include 2 security fixes following the security policy:
- cmd/go: arbitrary code execution during build on darwin
On Darwin, building a Go module which contains CGO can trigger arbitrary code execution when using the Apple version of ld, due to
usage of the -lto_library flag in a "#cgo LDFLAGS" directive.
Thanks to Juho Forsén of Mattermost for reporting this issue.
This is CVE-2024-24787 and Go issue https://go.dev/issue/67119.
- net: malformed DNS message can cause infinite loop
A malformed DNS message in response to a query can cause the Lookup functions to get stuck in an infinite loop.
Thanks to long-name-let-people-remember-you on GitHub for reporting this issue, and to Mateusz Poliwczak for bringing the issue to
our attention.
This is CVE-2024-24788 and Go issue https://go.dev/issue/66754.
View the release notes for more information:
https://go.dev/doc/devel/release#go1.22.3
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.10+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.9...go1.21.10
**- Description for the changelog**
```markdown changelog
Update Go runtime to 1.21.10
```
Signed-off-by: Paweł Gronowski <pawel.gronowski@docker.com>
Explicitly create the context and set it on the CLI, instead of depending on
NewDockerCli() to instance a default context.
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Co-authored-by: Alano Terblanche <18033717+Benehiko@users.noreply.github.com>
Signed-off-by: Alano Terblanche <18033717+Benehiko@users.noreply.github.com>
Added --detach and --quiet/-q flags to stack deploy. Setting --detach=false
waits until all of the stack services have converged. Shows progress bars for
each individual task, unless --quiet/-q is specified.
Co-authored-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: George Margaritis <gmargaritis@protonmail.com>
- gha runners updated to ubuntu 22.04
- e2e now runs against moby 23.0, 24.0 and 25.0
- temporarily skip broken test for moby < 25
Signed-off-by: Christopher Petito <chrisjpetito@gmail.com>
Adds a new plugin to the e2e plugins that simulates an older
plugin binary and a test suite to ensure older plugin binaries
keep behaving the same with newer CLI versions.
Signed-off-by: Laura Brehm <laurabrehm@hey.com>
go1.21.5 (released 2023-12-05) includes security fixes to the go command,
and the net/http and path/filepath packages, as well as bug fixes to the
compiler, the go command, the runtime, and the crypto/rand, net, os, and
syscall packages. See the Go 1.21.5 milestone on our issue tracker for
details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.5+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.5...go1.21.5
from the security mailing:
[security] Go 1.21.5 and Go 1.20.12 are released
Hello gophers,
We have just released Go versions 1.21.5 and 1.20.12, minor point releases.
These minor releases include 3 security fixes following the security policy:
- net/http: limit chunked data overhead
A malicious HTTP sender can use chunk extensions to cause a receiver
reading from a request or response body to read many more bytes from
the network than are in the body.
A malicious HTTP client can further exploit this to cause a server to
automatically read a large amount of data (up to about 1GiB) when a
handler fails to read the entire body of a request.
Chunk extensions are a little-used HTTP feature which permit including
additional metadata in a request or response body sent using the chunked
encoding. The net/http chunked encoding reader discards this metadata.
A sender can exploit this by inserting a large metadata segment with
each byte transferred. The chunk reader now produces an error if the
ratio of real body to encoded bytes grows too small.
Thanks to Bartek Nowotarski for reporting this issue.
This is CVE-2023-39326 and Go issue https://go.dev/issue/64433.
- cmd/go: go get may unexpectedly fallback to insecure git
Using go get to fetch a module with the ".git" suffix may unexpectedly
fallback to the insecure "git://" protocol if the module is unavailable
via the secure "https://" and "git+ssh://" protocols, even if GOINSECURE
is not set for said module. This only affects users who are not using
the module proxy and are fetching modules directly (i.e. GOPROXY=off).
Thanks to David Leadbeater for reporting this issue.
This is CVE-2023-45285 and Go issue https://go.dev/issue/63845.
- path/filepath: retain trailing \ when cleaning paths like \\?\c:\
Go 1.20.11 and Go 1.21.4 inadvertently changed the definition of the
volume name in Windows paths starting with \\?\, resulting in
filepath.Clean(\\?\c:\) returning \\?\c: rather than \\?\c:\ (among
other effects). The previous behavior has been restored.
This is an update to CVE-2023-45283 and Go issue https://go.dev/issue/64028.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Reverts "update to go1.21.4" due to regressions / breaking changes."
This reverts commit 4cf1c50ad1.
This re-applies commit 6472dabe4c.
----
update to go1.21.4
go1.21.4 (released 2023-11-07) includes security fixes to the path/filepath package, as well as bug fixes to the linker, the runtime, the compiler, and the go/types, net/http, and runtime/cgo packages. See the Go 1.21.4 milestone on our issue tracker for details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.4+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.3...go1.21.4
from the security mailing:
[security] Go 1.21.4 and Go 1.20.11 are released
Hello gophers,
We have just released Go versions 1.21.4 and 1.20.11, minor point releases.
These minor releases include 2 security fixes following the security policy:
- path/filepath: recognize `\??\` as a Root Local Device path prefix.
On Windows, a path beginning with `\??\` is a Root Local Device path equivalent
to a path beginning with `\\?\`. Paths with a `\??\` prefix may be used to
access arbitrary locations on the system. For example, the path `\??\c:\x`
is equivalent to the more common path c:\x.
The filepath package did not recognize paths with a `\??\` prefix as special.
Clean could convert a rooted path such as `\a\..\??\b` into
the root local device path `\??\b`. It will now convert this
path into `.\??\b`.
`IsAbs` did not report paths beginning with `\??\` as absolute.
It now does so.
VolumeName now reports the `\??\` prefix as a volume name.
`Join(`\`, `??`, `b`)` could convert a seemingly innocent
sequence of path elements into the root local device path
`\??\b`. It will now convert this to `\.\??\b`.
This is CVE-2023-45283 and https://go.dev/issue/63713.
- path/filepath: recognize device names with trailing spaces and superscripts
The `IsLocal` function did not correctly detect reserved names in some cases:
- reserved names followed by spaces, such as "COM1 ".
- "COM" or "LPT" followed by a superscript 1, 2, or 3.
`IsLocal` now correctly reports these names as non-local.
This is CVE-2023-45284 and https://go.dev/issue/63713.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Unfortunately, the go1.21.4 security update exposed some regressions / breaking
changes in moby (docker engine) and containerd. These issues are looked into,
but in the meantime we should revert this patch.
This temporarily reintroduces CVE-2023-45284 and CVE-2023-45283.
This reverts commit 6472dabe4c.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.21.4 (released 2023-11-07) includes security fixes to the path/filepath
package, as well as bug fixes to the linker, the runtime, the compiler, and
the go/types, net/http, and runtime/cgo packages. See the Go 1.21.4 milestone
on our issue tracker for details:
- https://github.com/golang/go/issues?q=milestone%3AGo1.21.4+label%3ACherryPickApproved
- full diff: https://github.com/golang/go/compare/go1.21.3...go1.21.4
from the security mailing:
[security] Go 1.21.4 and Go 1.20.11 are released
Hello gophers,
We have just released Go versions 1.21.4 and 1.20.11, minor point releases.
These minor releases include 2 security fixes following the security policy:
- path/filepath: recognize `\??\` as a Root Local Device path prefix.
On Windows, a path beginning with `\??\` is a Root Local Device path equivalent
to a path beginning with `\\?\`. Paths with a `\??\` prefix may be used to
access arbitrary locations on the system. For example, the path `\??\c:\x`
is equivalent to the more common path c:\x.
The filepath package did not recognize paths with a `\??\` prefix as special.
Clean could convert a rooted path such as `\a\..\??\b` into
the root local device path `\??\b`. It will now convert this
path into `.\??\b`.
`IsAbs` did not report paths beginning with `\??\` as absolute.
It now does so.
VolumeName now reports the `\??\` prefix as a volume name.
`Join(`\`, `??`, `b`)` could convert a seemingly innocent
sequence of path elements into the root local device path
`\??\b`. It will now convert this to `\.\??\b`.
This is CVE-2023-45283 and https://go.dev/issue/63713.
- path/filepath: recognize device names with trailing spaces and superscripts
The `IsLocal` function did not correctly detect reserved names in some cases:
- reserved names followed by spaces, such as "COM1 ".
- "COM" or "LPT" followed by a superscript 1, 2, or 3.
`IsLocal` now correctly reports these names as non-local.
This is CVE-2023-45284 and https://go.dev/issue/63713.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.21.3 (released 2023-10-10) includes a security fix to the net/http package.
See the Go 1.21.3 milestone on our issue tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.21.3+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.21.2...go1.21.3
From the security mailing:
[security] Go 1.21.3 and Go 1.20.10 are released
Hello gophers,
We have just released Go versions 1.21.3 and 1.20.10, minor point releases.
These minor releases include 1 security fixes following the security policy:
- net/http: rapid stream resets can cause excessive work
A malicious HTTP/2 client which rapidly creates requests and
immediately resets them can cause excessive server resource consumption.
While the total number of requests is bounded to the
http2.Server.MaxConcurrentStreams setting, resetting an in-progress
request allows the attacker to create a new request while the existing
one is still executing.
HTTP/2 servers now bound the number of simultaneously executing
handler goroutines to the stream concurrency limit. New requests
arriving when at the limit (which can only happen after the client
has reset an existing, in-flight request) will be queued until a
handler exits. If the request queue grows too large, the server
will terminate the connection.
This issue is also fixed in golang.org/x/net/http2 v0.17.0,
for users manually configuring HTTP/2.
The default stream concurrency limit is 250 streams (requests)
per HTTP/2 connection. This value may be adjusted using the
golang.org/x/net/http2 package; see the Server.MaxConcurrentStreams
setting and the ConfigureServer function.
This is CVE-2023-39325 and Go issue https://go.dev/issue/63417.
This is also tracked by CVE-2023-44487.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
go1.21.2 (released 2023-10-05) includes one security fixes to the cmd/go package,
as well as bug fixes to the compiler, the go command, the linker, the runtime,
and the runtime/metrics package. See the Go 1.21.2 milestone on our issue
tracker for details:
https://github.com/golang/go/issues?q=milestone%3AGo1.21.2+label%3ACherryPickApproved
full diff: https://github.com/golang/go/compare/go1.21.1...go1.21.2
From the security mailing:
[security] Go 1.21.2 and Go 1.20.9 are released
Hello gophers,
We have just released Go versions 1.21.2 and 1.20.9, minor point releases.
These minor releases include 1 security fixes following the security policy:
- cmd/go: line directives allows arbitrary execution during build
"//line" directives can be used to bypass the restrictions on "//go:cgo_"
directives, allowing blocked linker and compiler flags to be passed during
compliation. This can result in unexpected execution of arbitrary code when
running "go build". The line directive requires the absolute path of the file in
which the directive lives, which makes exploting this issue significantly more
complex.
This is CVE-2023-39323 and Go issue https://go.dev/issue/63211.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Paweł Gronowski
Sebastiaan van Stijn
David Karlsson
Laura Brehm
Sebastiaan van Stijn
Alano Terblanche
Grace Choi
Christopher Petito
George Margaritis
Brian Goff