Some bullet lists didn't render as bullet-lists because
of a missing newline.
Also added missing "label" filter for `docker ps` and
slightly re-worded the header above the supported filters.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
We now advise people to configure docker group and
add to sudo. Mac shouldn't use sudo. Removed sudo
from command examples. Left in installation to be removed
in installation doc sweep -- removing requires finer
grain control.
Signed-off-by: Mary Anthony <mary@docker.com>
Having the list in one spot makes it easier for people to see what's
avaiable instead of having to scan all of the docs and extract the info.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Add the capability to cancel the build by disconnecting the client.
This adds a `cancelled` channel which is used to signal that a build
should halt. The build is halted by sending a Kill signal and noticing
that the cancellation channel is closed.
This first pass implementation does not allow cancellation during a
pull, but that will come in a subsequent PR.
* Add documentation of cancellation to cli and API
* Protect job cancellation with sync.Once
* Add TestBuildCancelationKillsSleep
* Add test case for build cancellation of RUN statements.
Signed-off-by: Peter Waller <p@pwaller.net>
Closes#10191
Allow `docker build` to set --cpu-shares, --cpuset, --memory,
--memory-swap for all containers created by the build.
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
Copied code from CmdSave into CmdExport. This should work, not an expert in the API calls being made. But it does make more sense to have a consistent export/save flag.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
checkpoint before edits on the export functions
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Added an --output flag to docker export and created tests.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
White space cleanup.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Docker-DCO-1.1-Signed-off-by: Joseph Kern <jkern@semafour.net> (github: jfrazelle)
checkpoint before edits on the export functions
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
White space cleanup.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Added text to reflect a new output option for the export command.
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Whitespace clean up
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
Added man page documentation for the new --output flag in export
Signed-off-by: Joseph Kern <joseph.a.kern@gmail.com>
The STDOUT behavior of cp is not yet released in 1.50 so removed.
Also, tested against 1.5 all other behaviors and extended documentation to match.
Renamed HOSTPATH to HOSTDIR to give a self documenting name.
Adding back in the references to STDOUT
fix the command string
Entering Doug's comment re append and ~/tmp/foo in the glass
Adding in Doug's comments regarding PATHs and missing |-
Updating with James comments
Signed-off-by: Mary Anthony <mary@docker.com>
Add ability to refer to an image by repository name and digest using the
format repository@digest. Works for pull, push, run, build, and rmi.
Signed-off-by: Andy Goldstein <agoldste@redhat.com>
Adds more documentation for labels and adds the label instruction to the
man-pages.
Also included is a document called "Labels - custom meta-data in Docker"
in the user-guide, this is still a work-in-progress I started to describe
the "namespaces" conventions, an example on storing structured data.
I ran a bit "out of steam" (writers block?) on that document, but kept
it in (for now), in case it still ends up useful.
The Remote API documentation changes will need to be moved to the
docker_remote_api_v1.18.md document when rebasing the whole PR.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Signed-off-by: Darren Shepherd <darren@rancher.com>
Cgroup resources are host dependent, they should be in hostConfig.
For backward compatibility, we just copy it to hostConfig, and leave it in
Config for now, so there is no regressions, but the right way to use this
throught json is to put it in HostConfig, like:
{
"Hostname": "",
...
"HostConfig": {
"CpuShares": 512,
"Memory": 314572800,
...
}
}
As we will add CpusetMems, CpusetCpus is definitely a better name, but some
users are already using Cpuset in their http APIs, we also make it compatible.
The main idea is keep using Cpuset in Config Struct, and make it has the same
value as CpusetCpus, but not always, some scenarios:
- Users use --cpuset in docker command, it can setup cpuset.cpus and can
get Cpuset field from docker inspect or other http API which will get
config info.
- Users use --cpuset-cpus in docker command, ditto.
- Users use Cpuset field in their http APIs, ditto.
- Users use CpusetCpus field in their http APIs, they won't get Cpuset field
in Config info, because by then, they should already know what happens
to Cpuset.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
A minor thing, but I noticed that the "Reference" drop-down menu just
says "Command line". This was fine when we just had one command line,
but now there's also 'Compose command line' and I suspect we may add
others later. We should qualify the Docker one with the word "Docker"
in front
Signed-off-by: Doug Davis <dug@us.ibm.com>
`docker rmi` output in docs/sources/reference/commandline/cli.md
is different from real scene. This commit fixes it.
Signed-off-by: Deng Guangxing <dengguangxing@huawei.com>
This change adds daemon's system time as RFC3339Nano to the `/info` endpoint
and shows in a more readable format (UnixDate) in `docker -D info` output.
I will be using this to fix the clock skew between the remote test host and
the CI machines running `docker events`-related tests as they're using `--since`
and `--until` and the timestamps are not matching when daemon is not on the
same machine.
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
This moves some information on restart-policies from
the "command line" page to "run reference".
Also fixes some minor typos and adds a "NOTE"
about --rm and --restart not allowed to be combined.
Also removes inline CSS styles from tables,
which will be styled by the stylesheet, and fixes
some minor MarkDown errors (`<` -> <)
depends on https://github.com/docker/docs-base/pull/1resolves#11069
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
and add a testcase to catch this in the future.
While in there I also:
- removed extra periods from the few options that had them (new test)
- made the --filter option consistent across all command
Signed-off-by: Doug Davis <dug@us.ibm.com>
Closes#10807
Adds support for `dockerfile` ONLY when `Dockerfile` can't be found.
If we're building from a Dockerfile via stdin/URL then always download
it a `Dockerfile` and ignore the -f flag.
Signed-off-by: Doug Davis <dug@us.ibm.com>
Use `-it` combination in example instead of `-ti`, because this is how it used everywhere in examples.
Update dockerfile_best-practices.md
Fix typo in command name
Signed-off-by: Dmitry Gusev <dmitry.gusev@gmail.com>
Fixes: 10855
The example was actually incorrect for many situations, and also, now
that we have IPv6 we should not that the example is for IPv4 and note
how to find IPv6 addresses. Also, the device they want to connect to
could be the bridge, or main ethernet device, or some other device
name, so note that as well.
Docker-DCO-1.1-Signed-off-by: Phil Estes <estesp@linux.vnet.ibm.com> (github: estesp)
Simei He
dalanlan
Deng Guangxing
Sebastiaan van Stijn
John Willis
Mary Anthony
Ankush Agarwal
Doug Davis
jimmyxian
Natalie Parker
Peter Waller
Todd Whiteman
Harald Albers
Vishnu Kannan
Brian Goff
Joseph Kern
Mary Anthony
Alexander Morozov
Andy Goldstein
Darren Shepherd
Sven Dowideit
Qiang Huang
Mabin
Rick Wieman
Ahmet Alp Balkan
Srini Brahmaroutu
Lei Jitang
Zhang Wentao
resouer
Dmitry Gusev
Phil Estes