--group-add was used for specifying groups for both service create
and service update. For create it was confusing since we don't have
an existing set of groups. Instead I added --group to create, and
moved --group-add to service update only, like --group-rm
This deals with issue 27646
Signed-off-by: Lily Guo <lily.guo@docker.com>
Update flag documentation
Specify that --group, --group-add and --groupd-rm refers to
supplementary user groups
Signed-off-by: Lily Guo <lily.guo@docker.com>
Fix docs for groups and update completion scripts
Signed-off-by: Lily Guo <lily.guo@docker.com>
A HealthConfig entry was added to the ContainerSpec associated with the
service being created or updated.
Signed-off-by: Cezar Sa Espinola <cezarsa@gmail.com>
The --name flag was inadvertently added to
docker service update, but is not supported,
as it has various side-effects (e.g., existing
tasks are not renamed).
This removes the flag from the service update
command.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
containers may specify these cgroup values at runtime. This will allow
processes to change their priority to real-time within the container
when CONFIG_RT_GROUP_SCHED is enabled in the kernel. See #22380.
Also added sanity checks for the new --cpu-rt-runtime and --cpu-rt-period
flags to ensure that that the kernel supports these features and that
runtime is not greater than period.
Daemon will support a --cpu-rt-runtime flag to initialize the parent
cgroup on startup, this prevents the administrator from alotting runtime
to docker after each restart.
There are additional checks that could be added but maybe too far? Check
parent cgroups to ensure values are <= parent, inspecting rtprio ulimit
and issuing a warning.
Signed-off-by: Erik St. Martin <alakriti@gmail.com>
Currently, there's no way to restart the tasks of a service without
making an actual change to the service. This leads to us giving awkward
workarounds as in
https://github.com/docker/docker.github.io/pull/178/files, where we tell
people to scale a service up and down to restore balance, or make
unnecessary changes to trigger a restart.
This change adds a --force option to "docker service update", which
forces the service to be updated even if no changes require that.
Since rolling update parameters are respected, the user can use
"docker service --force" to do a rolling restart. For example, the
following is supported:
docker service update --force --update-parallelism 2 \
--update-delay 5s myservice
Since the default value of --update-parallelism is 1, the default
behavior is to restart the service one task at a time.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Keeping the current behavior for exec, i.e., inheriting
variables from main process. New variables will be added
to current ones. If there's already a variable with that
name it will be overwritten.
Example of usage: docker exec -it -e TERM=vt100 <container> top
Closes#24355.
Signed-off-by: Jonh Wendell <jonh.wendell@redhat.com>
Unfortunately, `(f)` aka `(ps:\n:)` flag will not create an array when
there is only one line. The subsequent use of indexes will then affect
the string. This leads to `docker rmi <tab>` to complete on the header
line instead of nothing.
Therefore, for each use of `(f)`, we ensure that we have an extra new
line to be sure we get an array.
Credit to @povesteam for the original report and fix in #27373.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
This adds support for two enhancements to swarm service rolling updates:
- Failure thresholds: In Docker 1.12, a service update could be set up
to either pause or continue after a single failure occurs. This adds
an --update-max-failure-ratio flag that controls how many tasks need to
fail to update for the update as a whole to be considered a failure. A
counterpart flag, --update-monitor, controls how long to monitor each
task for a failure after starting it during the update.
- Rollback flag: service update --rollback reverts the service to its
previous version. If a service update encounters task failures, or
fails to function properly for some other reason, the user can roll back
the update.
SwarmKit also has the ability to roll back updates automatically after
hitting the failure thresholds, but we've decided not to expose this in
the Docker API/CLI for now, favoring a workflow where the decision to
roll back is always made by an admin. Depending on user feedback, we may
add a "rollback" option to --update-failure-action in the future.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
When sending a build context to a remote server it may be
(significantly) advantageous to compress the build context. This commit
adds support for gz compression when constructing a build context
using a command like "docker build --compress ."
Signed-off-by: Paul Kehrer <paul.l.kehrer@gmail.com>
New driver options:
- `splunk-gzip` - gzip compress all requests to Splunk HEC
(enabled by default)
- `splunk-gzip-level` - change compression level.
Messages are sent in batches by 1000, with frequency of 5 seconds.
Maximum buffer is 10,000 events. If HEC will not be available, Splunk
Logging Driver will keep retrying while it can hold messages in buffer.
Added unit tests for driver.
Signed-off-by: Denis Gladkikh <denis@gladkikh.email>
`--log-opt splunk-format=inline|json|raw` allows to change how logging
driver sends data to Splunk, where
`inline` - default value, format used before, message is injected as a
line in JSON payload
`json` - driver will try to parse each line as a JSON object and embed it
inside of the JSON payload
`raw` - driver will send Raw payload instead of JSON, tag and attributes
will be prefixed before the message
`--log-opt splunk-verify-connection=true|false` - allows to skip
verification for Splunk Url
Signed-off-by: Denis Gladkikh <denis@gladkikh.email>
Rather than conflict with the unexposed task model, change the names of
the object-oriented task display to `docker <object> ps`. The command
works identically to `docker service tasks`. This change is superficial.
This provides a more sensical docker experience while not trampling on
the task model that may be introduced as a top-level command at a later
date.
The following is an example of the display using `docker service ps`
with a service named `condescending_cori`:
```
$ docker service ps condescending_cori
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 13 minutes ago Running 6c6d232a5d0e
```
The following shows the output for the node on which the command is
running:
```console
$ docker node ps self
ID NAME SERVICE IMAGE LAST STATE DESIRED STATE NODE
b1tpbi43k1ibevg2e94bmqo0s mad_kalam.1 mad_kalam apline Accepted 2 seconds ago Accepted 6c6d232a5d0e
e2cd9vqb62qjk38lw65uoffd2 condescending_cori.1 condescending_cori alpine Running 12 minutes ago Running 6c6d232a5d0e
4x609m5o0qyn0kgpzvf0ad8x5 furious_davinci.1 furious_davinci redis Running 32 minutes ago Running 6c6d232a5d0e
```
Signed-off-by: Stephen J Day <stephen.day@docker.com>
This changes the default behavior so that rolling updates will not
proceed once an updated task fails to start, or stops running during the
update. Users can use docker service inspect --pretty servicename to see
the update status, and if it pauses due to a failure, it will explain
that the update is paused, and show the task ID that caused it to pause.
It also shows the time since the update started.
A new --update-on-failure=(pause|continue) flag selects the
behavior. Pause means the update stops once a task fails, continue means
the old behavior of continuing the update anyway.
In the future this will be extended with additional behaviors like
automatic rollback, and flags controlling parameters like how many tasks
need to fail for the update to stop proceeding. This is a minimal
solution for 1.12.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
There are currently problems with "swarm init" and "swarm join" when an
explicit --listen-addr flag is not provided. swarmkit defaults to
finding the IP address associated with the default route, and in cloud
setups this is often the wrong choice.
Introduce a notion of "advertised address", with the client flag
--advertise-addr, and the daemon flag --swarm-default-advertise-addr to
provide a default. The default listening address is now 0.0.0.0, but a
valid advertised address must be detected or specified.
If no explicit advertised address is specified, error out if there is
more than one usable candidate IP address on the system. This requires a
user to explicitly choose instead of letting swarmkit make the wrong
choice. For the purposes of this autodetection, we ignore certain
interfaces that are unlikely to be relevant (currently docker*).
The user is also required to choose a listen address on swarm init if
they specify an explicit advertise address that is a hostname or an IP
address that's not local to the system. This is a requirement for
overlay networking.
Also support specifying interface names to --listen-addr,
--advertise-addr, and the daemon flag --swarm-default-advertise-addr.
This will fail if the interface has multiple IP addresses (unless it has
a single IPv4 address and a single IPv6 address - then we resolve the
tie in favor of IPv4).
This change also exposes the node's externally-reachable address in
docker info, as requested by #24017.
Make corresponding API and CLI docs changes.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
Swarm join has been changed in f5e1f6f6880391a5a3399023cf93a3c48502e57d,
removing various options and the "node accept" command.
This removes the removed options from the completion
scripts.
NOTE: a new command ("docker swarm join-token") was
also added, but is not part of this commit.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Implement the proposal from
https://github.com/docker/docker/issues/24430#issuecomment-233100121
Removes acceptance policy and secret in favor of an automatically
generated join token that combines the secret, CA hash, and
manager/worker role into a single opaque string.
Adds a docker swarm join-token subcommand to inspect and rotate the
tokens.
Signed-off-by: Aaron Lehmann <aaron.lehmann@docker.com>
This adds the `--live-restore` option to the documentation.
Also synched usage description in the documentation
with the actual description, and re-phrased some
flag descriptions to be a bit more consistent.
Signed-off-by: Sebastiaan van Stijn <github@gone.nl>
Add support for two now filter on the `images` command : `before` and
`since`. They work the same as the one on the `ps` command but for
images.
$ docker images --filter before=myimage
# display all images older than myimage
$ docker images --filter since=myimage
# display all images younger than myimage
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
The filtering is made server-side, and the following filters are
supported:
* is-official (boolean)
* is-automated (boolean)
* has-stars (integer)
Signed-off-by: Fabrizio Soppelsa <fsoppelsa@mirantis.com>
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
When `psFormat` is used in the docker client config json, if the output
is non-standard it breaks some of the completion handling for
containers.
This fixes that by ensuring that calls to `ps` use the default/standard
formatting by calling `docker ps --format 'table'`
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
This patch will allow users to specify namespace specific "kernel parameters"
for running inside of a container.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
This removes the email prompt when you use docker login, and also removes the ability to register via the docker cli. Docker login, will strictly be used for logging into a registry server.
Signed-off-by: Ken Cochrane <kencochrane@gmail.com>
Use of "Set ..." and "Specify ..." are removed in favor of directly
using nouns.
Also:
- add description for `run --isolation`
- reduce description of `run --shm-size`
- fix `daemon --bip` argument handling
Signed-off-by: Vincent Bernat <vincent@bernat.im>
libcontainer v0.0.4 introduces setting `/proc/self/oom_score_adj` to
better tune oom killing preferences for container process. This patch
simply integrates OomScoreAdj libcontainer's config option and adjust
the cli with this new option.
Signed-off-by: Antonio Murdaca <amurdaca@redhat.com>
Signed-off-by: Antonio Murdaca <runcom@redhat.com>
It will Tar up contents of child directory onto tmpfs if mounted over
This patch will use the new PreMount and PostMount hooks to "tar"
up the contents of the base image on top of tmpfs mount points.
Signed-off-by: Dan Walsh <dwalsh@redhat.com>
Otherwise, the cache would be invalid and won't be refreshed soon. This
can happen when the user has the completion installed before docker is
installed.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
LXC support has been deprecated and the related completion has been
removed in #17700 but was added back in #17334.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
The LXC driver was deprecated in Docker 1.8.
Following the deprecation rules, we can remove a deprecated feature
after two major releases. LXC won't be supported anymore starting on Docker 1.10.
Signed-off-by: David Calavera <david.calavera@gmail.com>
This enables Zsh to understand commands like "docker run -it
ubuntu". However, by enabling this, this also makes Zsh completes
"docker run -u<tab>" with "docker run -uapprox" which is not valid. The
users have to put the space or the equal sign themselves before trying
to complete.
Therefore, this behavior is disabled by default. To enable it:
zstyle ':completion:*:*:docker:*' option-stacking yes
zstyle ':completion:*:*:docker-*:*' option-stacking yes
Signed-off-by: Vincent Bernat <vincent@bernat.im>
This is allowed by Docker and helps the completion to not get confused
when a user uses this notation. This will also help to enable stacking
of short options since Zsh needs that to not stack options with
arguments.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Allow to set the signal to stop a container in `docker run`:
- Use `--stop-signal` with docker-run to set the default signal the container will use to exit.
Signed-off-by: David Calavera <david.calavera@gmail.com>
- Add fluentd logging driver to zsh completion #12876
- Add inspect --type flag to zsh completion #13187
- Respect -H option in zsh completion #13195
- Fix number of argument limit for pause and unpause in zsh completion
Signed-off-by: Steve Durrheimer <s.durrheimer@gmail.com>
Added --since argument to `docker logs` command. Accept unix
timestamps and shows logs only created after the specified date.
Default value is 0 and passing default value or not specifying
the value in the request causes parameter to be ignored (behavior
prior to this change).
Signed-off-by: Ahmet Alp Balkan <ahmetalpbalkan@gmail.com>
Adds a `stream` query param to the stats API which allows API users to
only collect one stats entry and disconnect instead of keeping the
connection alive to stream more stats.
Also adds a `--no-stream` flag to `docker stats` which does the same
Signed-off-by: Brian Goff <cpuguy83@gmail.com>
zsh completion is updated with the content of
felixr/docker-zsh-completion.
ef4a3fce0437 Update completion for `wait' as per 1.5.0
ace5aa9c1282 Add completion for `stats'
91f112834865 Update completion for `search' as per 1.5.0
a5e4febe4bf6 Update completion for `save' as per 1.5.0
1cdbdb18a384 Add completion for `rename'
2f004bb724b9 Update completion for `pull' as per 1.5.0
773b88e0885b Update completion for `logs' as per 1.5.0
c57e5d5c4551 Update completion for `load' to favor archive files
9af7d12b487e Update completion for `images` as per 1.5.0
0d59e66aff30 update completion for `exec' to complete on commands
46b6c66760d7 Update completion for `events' as per 1.5.0
307e0bdc4c34 Update completion for `commit' as per 1.5.0
c4b331f38cc4 Update completion for `build' as per 1.5.0
Also added myself in the `MAINTAINERS` file.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
A lot of flags have been added on the output of `docker help`. Use a
more robust method to extract the list of available subcommands by
spotting the `Command:` line and the next blank line.
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Steve Durrheimer
Akihiro Suda
allencloud
Lily Guo
Cezar Sa Espinola
Ce Gao
Sebastiaan van Stijn
Erik St. Martin
Aaron Lehmann
Jonh Wendell
Vincent Bernat
Carlos Alexandro Becker
Wenzhi Liang
Paul Kehrer
Vincent Demeester
Denis Gladkikh
Harald Albers
Yong Tang
timfeirg
Josh Horwitz
Stephen J Day
Jonathan Lomas
Ke Xu
Kenfe-Mickael Laventure
Tianyi Wang
Fabrizio Soppelsa
Mrunal Patel
Brian Goff
Dan Walsh
Jessica Frazelle
Mike Danese
Ken Cochrane
Vincent Bernat
Aidan Hobson Sayers
Vincent Woo
Tibor Vass
Ma Shimiao
Wen Cheng Ma
Antonio Murdaca
David Calavera
Zhang Kun
Tim Hockin
Samuel Karp
Ahmet Alp Balkan
Michal Minar
Sven Dowideit